{"title":"Aluminum Trailer Ramps","description":null,"products":[{"product_id":"five-star-bifold-aluminum-loading-ramp","title":"Five Star Bi-Fold Aluminum Loading Ramp | ATV, Mower \u0026 Equipment Ramp","description":"\u003ch4\u003eFive Star Bi-Fold Aluminum Loading Ramp | ATV, Mower \u0026amp; Equipment Ramp\u003c\/h4\u003e\n\u003cp\u003eLoad ATVs, riding mowers, and other four-wheel equipment with a single, fixed-width ramp that folds in half for easy carrying and storage. The Five Star bi-fold ramp opens into one solid loading surface, so there's no lining up two separate ramps to match your equipment's wheelbase—set it, strap it, and load.\u003c\/p\u003e\n\u003cp\u003eBuilt from 6000-series tempered, aircraft-grade aluminum, this ramp stays light enough to position and set up by hand while resisting the rust and corrosion that affect steel ramps in wet and outdoor conditions. Each ramp is MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose a bi-fold ramp\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFolds in half for compact transport and storage\u003c\/li\u003e\n\u003cli\u003eOpens to a single fixed-width loading surface—no aligning two separate ramps\u003c\/li\u003e\n\u003cli\u003eIdeal for ATVs, riding mowers, and four-wheel equipment\u003c\/li\u003e\n\u003cli\u003eLightweight 6000-series tempered aluminum; rust- and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMIG-welded aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eAvailable in multiple lengths, widths, and load ratings so you can match the ramp to your equipment and loading height:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 6 ft, 6 ft 4 in, 6 ft 10 in, and 7 ft 10 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidths:\u003c\/strong\u003e 40 in, 44 in, and 48 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 1,000 lb or 1,500 lb (distributed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA longer ramp creates a lower, safer loading angle—helpful for taller tailgates, trailer decks, and lower-clearance equipment. Because a bi-fold opens to a fixed width, choose a width that fully supports your equipment's tires. Always select a load rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"6' \/ 40\" \/ 1000","offer_id":48372308213930,"sku":"FSM-400","price":399.36,"currency_code":"USD","in_stock":true},{"title":"6' \/ 44\" \/ 1000","offer_id":48372308246698,"sku":"FSM-444","price":407.04,"currency_code":"USD","in_stock":true},{"title":"6' \/ 44\" \/ 1500","offer_id":48372308279466,"sku":"FSM-444H","price":439.04,"currency_code":"USD","in_stock":true},{"title":"6' \/ 48\" \/ 1500","offer_id":48372308312234,"sku":"FSM-448H","price":445.44,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 44\" \/ 1000","offer_id":48372308345002,"sku":"FSM-644","price":417.28,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 44\" \/ 1500","offer_id":48372308377770,"sku":"FSM-644H","price":497.92,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 40\" \/ 1000","offer_id":48372308410538,"sku":"FSM-740","price":476.16,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 44\" \/ 1500","offer_id":48372308443306,"sku":"FSM-744H","price":522.24,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 48\" \/ 1500","offer_id":48372308476074,"sku":"FSM-748H","price":527.36,"currency_code":"USD","in_stock":true},{"title":"7'10\" \/ 44\" \/ 1500","offer_id":48372308508842,"sku":"FSM-844H","price":569.6,"currency_code":"USD","in_stock":true},{"title":"7'10\" \/ 48\" \/ 1500","offer_id":48372308541610,"sku":"FSM-848H","price":587.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_bifold_image_1.jpg?v=1780520883"},{"product_id":"five-star-motorcycle-adaptor-ramp-524acc","title":"Five Star Motorcycle Adaptor Ramp for 524ACC Aluminum Cargo Carrier","description":"\u003ch4\u003eFive Star Motorcycle Adaptor Ramp for 524ACC Aluminum Cargo Carrier\u003c\/h4\u003e\n\u003cp\u003eTurn your Five Star 524ACC or 524ACCU aluminum cargo carrier into a convenient roll-off carrier for dirt bikes and other two-wheel toys. Add one or two adaptor ramp assemblies to your carrier, load up, add your favorite tie-downs, and go.\u003c\/p\u003e\n\u003cp\u003eEach assembly includes everything needed to load and carry a small motorcycle: a carry ramp that bolts to the carrier, a loading ramp that pins to the carry ramp for safe loading, and a tire loop that holds the cycle in place when used with tie-downs.\u003c\/p\u003e\n\u003cp\u003eBuilt from tempered aluminum, the adaptor resists the rust and corrosion that affect steel in wet and outdoor conditions. Like every Five Star product, it's MIG welded by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum products in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose this adaptor\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConverts a 524ACC or 524ACCU cargo carrier into a roll-off motorcycle carrier\u003c\/li\u003e\n\u003cli\u003eAdd one or two assemblies depending on your setup\u003c\/li\u003e\n\u003cli\u003eCarry ramp bolts to the carrier; loading ramp pins to engage it for safe loading\u003c\/li\u003e\n\u003cli\u003eTire loop holds the cycle in place when used with tie-downs\u003c\/li\u003e\n\u003cli\u003eRust- and corrosion-resistant tempered aluminum\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to fit the Five Star 524ACC (welded tongue) and 524ACCU (bolt-in tongue) aluminum cargo carriers. The cargo carrier is sold separately.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"Default Title","offer_id":48372309196970,"sku":"FSM-524 ACC-MA","price":312.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Motorcycle_Adaptor_Ramp_1.jpg?v=1780526024"},{"product_id":"five-star-folding-aluminum-arch-ramp-pair","title":"Five Star Folding Aluminum Arch Ramp Pair | Loading Ramps for Trucks \u0026 Trailers","description":"\u003ch4\u003eFive Star Folding Aluminum Arch Ramp Pair | Loading Ramps for Trucks \u0026amp; Trailers\u003c\/h4\u003e\n\u003cp\u003eA pair of arched loading ramps that fold end-to-end for easy carrying and storage—a real advantage at the longer lengths, where a one-piece ramp gets unwieldy. You get the same frame structure as Five Star's standard arch ramps, built in halves and joined with Five Star's own hinges. They aren't bought-in parts: Five Star machines them from the same high-quality aluminum plate and bar as the ramps themselves, so the hinge is as durable as the rest of the ramp.\u003c\/p\u003e\n\u003cp\u003eThe arch profile reduces the angle where the ramp meets your truck bed or trailer, helping prevent the belly scraping and high-centering that low-clearance equipment is prone to—golf carts, race cars, zero-turn mowers, garden tractors, and other rolling stock that sits low between the axles. The same geometry is what makes it work as a snowblower ramp for truck loading: a walk-behind snowblower's auger housing and skid shoes sit inches off the ground, and the arched transition keeps them from catching where a straight ramp meets the tailgate.\u003c\/p\u003e\n\u003cp\u003eBuilt from tempered, aircraft-grade aluminum, the pair stays light enough to position and set up by hand while resisting the rust and corrosion that affect steel ramps in wet and outdoor conditions. Each ramp is MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose a folding arch ramp pair\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFolds end-to-end for compact transport and storage\u003c\/li\u003e\n\u003cli\u003eFive Star-made aluminum hinges—as durable as the ramp itself\u003c\/li\u003e\n\u003cli\u003eArch profile reduces entry angle and helps prevent belly scraping\u003c\/li\u003e\n\u003cli\u003eIdeal for golf carts, race cars, mowers, and other low-clearance equipment\u003c\/li\u003e\n\u003cli\u003eCapacities up to 3,000 lb (per pair)\u003c\/li\u003e\n\u003cli\u003eLightweight tempered aluminum; rust- and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMIG-welded aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eSold as a pair—each ramp supports one side of your equipment. Available in multiple lengths, widths, and load ratings so you can match the set to your equipment and loading height:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 7 ft 4 in, 8 ft, 9 ft, and 10 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidths:\u003c\/strong\u003e 12 in and 16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 1,500 lb or 3,000 lb per pair (distributed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA longer ramp creates a lower, safer loading angle—helpful for taller tailgates, trailer decks, and lower-clearance equipment. Five Star recommends 16-inch-wide ramps for lengths over 7 feet, which covers this entire range; the wider deck gives more margin for tire placement and reduces the chance of driving off the edge. The full width of each tire should fit within the width of the ramp. Always select a load rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"7'4\" \/ 12\" \/ 1500","offer_id":48372309426346,"sku":"FSM-712F","price":471.04,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 3000","offer_id":48372309459114,"sku":"FSM-712FH3","price":716.8,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 1500","offer_id":48372309491882,"sku":"FSM-716F","price":627.2,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 1500","offer_id":48372309524650,"sku":"FSM-812F","price":522.24,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 1500","offer_id":48372309557418,"sku":"FSM-816F","price":746.24,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 1500","offer_id":48372309590186,"sku":"FSM-912F","price":769.28,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 1500","offer_id":48372309622954,"sku":"FSM-916F","price":849.92,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 1500","offer_id":48372309655722,"sku":"FSM-1012F","price":944.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Folding_Arch_Pair_3.jpg?v=1780527208"},{"product_id":"five-star-aluminum-arch-loading-ramp-pair","title":"Five Star Aluminum Arch Loading Ramp Pair | Up to 10,000 lb Capacity","description":"\u003ch4\u003eFive Star Aluminum Arch Loading Ramp Pair | Up to 10,000 lb Capacity\u003c\/h4\u003e\n\u003cp\u003eA pair of arched aluminum loading ramps—one ramp under each side of your equipment—built to handle the broadest range of loading jobs. The arch is what sets these apart: it reduces the angle where the ramp meets your truck bed or trailer, so low-slung equipment transitions onto the deck without the belly scraping and high-centering that flat ramps invite.\u003c\/p\u003e\n\u003cp\u003eThat makes arch ramps the right call for anything that sits low between the axles—golf carts, race cars, zero-turn mowers, skid steers, garden tractors, tool cabinets, and similar rolling stock. Arch height runs 2 to 4 inches depending on length. On the 7-foot and longer models the arch sits near the top of the ramp, right where the transition happens; the 5-foot and 6-foot models are arched their full length.\u003c\/p\u003e\n\u003cp\u003eEach ramp is made from tempered, aircraft-grade aluminum—light enough to position and set up by hand, and resistant to the rust and corrosion that wear down steel ramps in wet and outdoor conditions. They're MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose arch over straight\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArched profile reduces entry angle and helps prevent belly scraping\u003c\/li\u003e\n\u003cli\u003eBest choice for low-clearance equipment that sits low between the axles\u003c\/li\u003e\n\u003cli\u003eSold as a pair—each ramp supports one side of the load\u003c\/li\u003e\n\u003cli\u003eCapacities up to 10,000 lb per pair (distributed)\u003c\/li\u003e\n\u003cli\u003eAvailable in 12 in, 16 in, and 24 in widths\u003c\/li\u003e\n\u003cli\u003eLightweight tempered aluminum; rust- and corrosion-resistant. Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eAvailable in lengths from 5 ft to 10 ft, in 12-, 16-, and 24-inch widths, with capacities up to 10,000 lb per pair. A longer ramp creates a lower, safer loading angle—helpful for taller tailgates, trailer decks, and lower-clearance equipment. The full width of each tire or track should fit within the ramp; Five Star recommends 16-inch ramps for lengths over 7 ft, while the 24-inch width suits wider tires, tracks, and dual wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout load ratings:\u003c\/strong\u003e the capacity shown is for the pair. A pair rated 3,000 lb is two ramps at 1,500 lb each. Always choose a rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"5' \/ 12\" \/ 2500","offer_id":48372309917866,"sku":"FSM-512","price":360.96,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 5000","offer_id":48372309950634,"sku":"FSM-512H5","price":440.32,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 10000","offer_id":48372309983402,"sku":"FSM-512H10","price":574.72,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 2500","offer_id":48372310016170,"sku":"FSM-516","price":433.92,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 5000","offer_id":48372310048938,"sku":"FSM-516H5","price":522.24,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 10000","offer_id":48372310081706,"sku":"FSM-516H10","price":614.4,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 2000","offer_id":48372310114474,"sku":"FSM-612H2","price":430.08,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 3000","offer_id":48372310147242,"sku":"FSM-612H3","price":632.32,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 5000","offer_id":48372310180010,"sku":"FSM-612H5","price":709.12,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 10000","offer_id":48372310212778,"sku":"FSM-612H10","price":779.52,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 1000","offer_id":48372310245546,"sku":"FSM-616","price":522.24,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 3000","offer_id":48372310278314,"sku":"FSM-616H3","price":715.52,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 5000","offer_id":48372310311082,"sku":"FSM-616H5","price":764.16,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 10000","offer_id":48372310343850,"sku":"FSM-616H10","price":915.2,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 24\" \/ 1000","offer_id":48372310376618,"sku":"FSM-624","price":736.0,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 1500","offer_id":48372310409386,"sku":"FSM-712","price":454.4,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 3000","offer_id":48372310442154,"sku":"FSM-712H3","price":779.52,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 6000","offer_id":48372310474922,"sku":"FSM-712H6","price":1004.8,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 1500","offer_id":48372310507690,"sku":"FSM-716","price":628.48,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 3000","offer_id":48372310540458,"sku":"FSM-716H3","price":907.52,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 6000","offer_id":48372310573226,"sku":"FSM-716H6","price":1021.44,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 24\" \/ 1500","offer_id":48372310605994,"sku":"FSM-724","price":812.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 1500","offer_id":48372310638762,"sku":"FSM-812","price":549.12,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 3000","offer_id":48372310671530,"sku":"FSM-812H3","price":780.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 6000","offer_id":48372310704298,"sku":"FSM-812H6","price":995.84,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 1500","offer_id":48372310737066,"sku":"FSM-816","price":659.2,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 3000","offer_id":48372310769834,"sku":"FSM-816H3","price":940.8,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 1500","offer_id":48372310802602,"sku":"FSM-912","price":688.64,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 3000","offer_id":48372310835370,"sku":"FSM-912H3","price":998.4,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 6000","offer_id":48372310868138,"sku":"FSM-912H6","price":1089.28,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 1500","offer_id":48372310900906,"sku":"FSM-916","price":733.44,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 3000","offer_id":48372310933674,"sku":"FSM-916H3","price":1024.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 1500","offer_id":48372310966442,"sku":"FSM-1012","price":825.6,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 3000","offer_id":48372310999210,"sku":"FSM-1012H3","price":1056.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 6000","offer_id":48372311031978,"sku":"FSM-1012H6","price":1393.92,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 1500","offer_id":48372311064746,"sku":"FSM-1016","price":907.52,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 3000","offer_id":48372311097514,"sku":"FSM-1016H3","price":1103.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Arch_Ramp_Pair_1.jpg?v=1780530025"},{"product_id":"five-star-aluminum-straight-loading-ramp-pair","title":"Five Star Aluminum Straight Loading Ramp Pair | Up to 10,000 lb Capacity","description":"\u003ch4\u003eFive Star Aluminum Straight Loading Ramp Pair | Up to 10,000 lb Capacity\u003c\/h4\u003e\n\u003cp\u003eA pair of straight aluminum loading ramps—one under each side of your equipment—with the same build and load ratings as Five Star's arch ramps, minus the arch. Dropping the arch lowers the overall height, and that's the whole point: straight ramps slide into tighter spaces for storage, tuck under equipment, and stow as slide-outs where an arched ramp won't fit.\u003c\/p\u003e\n\u003cp\u003eIf clearance isn't your concern but storage space is, this is the profile to reach for. You still get the full loading capability—up to 10,000 lb per pair, three standard widths, and the same optional end supports and surfacing as the rest of the Five Star lineup—so you can load just about anything that rolls and then put the ramps away flat.\u003c\/p\u003e\n\u003cp\u003eEach ramp is made from tempered, aircraft-grade aluminum—light to handle and set up, and resistant to the rust and corrosion that wear down steel ramps in wet and outdoor conditions. They're MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose straight over arch\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLower overall height—slides into tighter spaces for storage\u003c\/li\u003e\n\u003cli\u003eStows easily as a slide-out or tucked under equipment\u003c\/li\u003e\n\u003cli\u003eSame load ratings and widths as the arch versions\u003c\/li\u003e\n\u003cli\u003eSold as a pair—each ramp supports one side of the load\u003c\/li\u003e\n\u003cli\u003eCapacities up to 10,000 lb per pair (distributed)\u003c\/li\u003e\n\u003cli\u003eAvailable in 12 in, 16 in, and 24 in widths\u003c\/li\u003e\n\u003cli\u003eLightweight tempered aluminum; rust- and corrosion-resistant. Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eAvailable in lengths from 5 ft to 10 ft, in 12-, 16-, and 24-inch widths, with capacities up to 10,000 lb per pair. A longer ramp creates a lower, safer loading angle—helpful for taller tailgates and trailer decks. The full width of each tire or track should fit within the ramp; Five Star recommends 16-inch ramps for lengths over 7 ft, while the 24-inch width suits wider tires, tracks, and dual wheels. If your equipment sits low between the axles and high-centering is a risk, consider the arch version instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout load ratings:\u003c\/strong\u003e the capacity shown is for the pair. A pair rated 3,000 lb is two ramps at 1,500 lb each. Always choose a rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"5' \/ 12\" \/ 2500","offer_id":48372311195818,"sku":"FSM-512S","price":360.96,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 5000","offer_id":48372311228586,"sku":"FSM-512SH5","price":440.32,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 10000","offer_id":48372311261354,"sku":"FSM-512SH10","price":574.72,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 2500","offer_id":48372311294122,"sku":"FSM-516S","price":433.92,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 5000","offer_id":48372311326890,"sku":"FSM-516SH5","price":509.44,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 10000","offer_id":48372311359658,"sku":"FSM-516SH10","price":601.6,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 2000","offer_id":48372311392426,"sku":"FSM-612SH2","price":430.08,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 3000","offer_id":48372311425194,"sku":"FSM-612SH3","price":625.92,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 5000","offer_id":48372311457962,"sku":"FSM-612SH5","price":702.72,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 10000","offer_id":48372311490730,"sku":"FSM-612SH10","price":766.72,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 1000","offer_id":48372311523498,"sku":"FSM-616S","price":522.24,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 3000","offer_id":48372311556266,"sku":"FSM-616SH3","price":709.12,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 5000","offer_id":48372311589034,"sku":"FSM-616SH5","price":757.76,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 10000","offer_id":48372311621802,"sku":"FSM-616SH10","price":902.4,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 24\" \/ 1500","offer_id":48372311654570,"sku":"FSM-624S","price":736.0,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 1500","offer_id":48372311687338,"sku":"FSM-712S","price":467.2,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 3000","offer_id":48372311720106,"sku":"FSM-712SH3","price":702.72,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 6000","offer_id":48372311752874,"sku":"FSM-712SH6","price":992.0,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 1500","offer_id":48372311785642,"sku":"FSM-716S","price":628.48,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 3000","offer_id":48372311818410,"sku":"FSM-716SH3","price":907.52,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 6000","offer_id":48372311851178,"sku":"FSM-716SH6","price":1021.44,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 24\" \/ 1500","offer_id":48372311883946,"sku":"FSM-724S","price":812.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 1500","offer_id":48372311916714,"sku":"FSM-812S","price":549.12,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 3000","offer_id":48372311949482,"sku":"FSM-812SH3","price":780.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 6000","offer_id":48372311982250,"sku":"FSM-812SH6","price":995.84,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 1500","offer_id":48372312015018,"sku":"FSM-816S","price":659.2,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 3000","offer_id":48372312047786,"sku":"FSM-816SH3","price":940.8,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 1500","offer_id":48372312080554,"sku":"FSM-912S","price":688.64,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 3000","offer_id":48372312113322,"sku":"FSM-912SH3","price":998.4,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 6000","offer_id":48372312146090,"sku":"FSM-912SH6","price":1089.28,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 1500","offer_id":48372312178858,"sku":"FSM-916S","price":733.44,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 3000","offer_id":48372312211626,"sku":"FSM-916SH3","price":1024.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 1500","offer_id":48372312244394,"sku":"FSM-1012S","price":825.6,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 3000","offer_id":48372312277162,"sku":"FSM-1012SH3","price":1056.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 6000","offer_id":48372312309930,"sku":"FSM-1012SH6","price":1393.92,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 1500","offer_id":48372312342698,"sku":"FSM-1016S","price":907.52,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 3000","offer_id":48372312375466,"sku":"FSM-1016SH3","price":1103.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Straight_Ramp_Pair_1.jpg?v=1780530885"},{"product_id":"five-star-aluminum-cargo-carrier","title":"Five Star Aluminum Cargo Carrier | 2\" Hitch Mount Hauler | 500 lb Capacity","description":"\u003ch4\u003eFive Star Aluminum Cargo Carrier | 2\" Hitch Mount Hauler | 500 lb Capacity\u003c\/h4\u003e\n\u003cp\u003eMore stuff than the car will hold? A sloppy, drippy, or smelly load you'd rather keep out of the SUV? The Five Star cargo carrier slips into a standard 2-inch hitch receiver and hauls up to 500 lb at a convenient height for loading and unloading—so the muddy cooler, the firewood, or the extra gear rides outside the cabin.\u003c\/p\u003e\n\u003cp\u003eA 3-inch lip runs around the tray to trap the load, and the expanded aluminum mesh floor lets water and debris pass straight through instead of pooling. The mesh also gives you multiple tie-down points across the tray, so odd-shaped loads stay put.\u003c\/p\u003e\n\u003cp\u003eBuilt from tempered aluminum, the carrier resists the rust and corrosion that affect steel haulers in wet and outdoor conditions, and it's light enough to mount and remove by hand. Like every Five Star product, it's MIG welded by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum products in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose this cargo carrier\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits a standard 2-inch hitch receiver\u003c\/li\u003e\n\u003cli\u003e500 lb total load capacity\u003c\/li\u003e\n\u003cli\u003e3-inch lip traps the load on all sides\u003c\/li\u003e\n\u003cli\u003eExpanded aluminum mesh floor drains water and debris and adds tie-down points\u003c\/li\u003e\n\u003cli\u003eLightweight, rust- and corrosion-resistant aluminum\u003c\/li\u003e\n\u003cli\u003eCompatible with the 524ACC-MA Motorcycle Adaptor to haul dirt bikes and other two-wheel toys (adaptor sold separately)\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTwo mounting options\u003c\/h4\u003e\n\u003cp\u003eChoose the tongue style that fits how you store and ship:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e524ACC – Welded Tongue:\u003c\/strong\u003e one-piece welded construction with a fixed hitch tube. Simple and solid, with nothing to assemble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e524ACCU – Bolt-In Tongue:\u003c\/strong\u003e removable hitch tube that bolts on, so the carrier packs down smaller for shipping and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"Welded hitch tube","offer_id":48372312473770,"sku":"FSM-524 ACC","price":446.72,"currency_code":"USD","in_stock":true},{"title":"Removable bolt-in hitch tube","offer_id":48372312506538,"sku":"FSM-524 ACCU","price":448.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Cargo_Carrier_1.jpg?v=1780527778"},{"product_id":"five-star-cargo-carrier-tailgate-ramp","title":"Five Star Aluminum Cargo Carrier with Tailgate Ramp | Scooter \u0026 Wheelchair Hauler","description":"\u003ch4\u003eFive Star Aluminum Cargo Carrier with Tailgate Ramp | Scooter \u0026amp; Wheelchair Hauler\u003c\/h4\u003e\n\u003cp\u003eA hitch-mounted aluminum cargo carrier with a built-in tailgate ramp, made for loading rolling equipment without lifting it. The tailgate folds to three positions: vertical to wall in and haul scooters, wheelchairs, generators, or snow blowers; down to act as a loading ramp; and flat for storage or to use the carrier as a standard flat hauler. Roll the load up the tailgate, raise it, strap down, and go.\u003c\/p\u003e\n\u003cp\u003eIt's all aluminum—no chipping paint, no rusty steel. The expanded metal floor lets water and debris pass straight through and gives you multiple tie-down points across the tray, while the tailgate uses a special raised expanded-metal surface for traction in wet and dry conditions.\u003c\/p\u003e\n\u003cp\u003eBuilt from tempered aluminum, the carrier resists the rust and corrosion that affect steel haulers outdoors. Like every Five Star product, it's MIG welded by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum products in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose this carrier\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3-position tailgate—vertical to haul, down to load, flat for storage\u003c\/li\u003e\n\u003cli\u003eRaised expanded-metal tailgate surface for wet and dry traction\u003c\/li\u003e\n\u003cli\u003eLoads scooters, wheelchairs, generators, snow blowers, and other rolling equipment\u003c\/li\u003e\n\u003cli\u003eFits a standard 2-inch hitch receiver\u003c\/li\u003e\n\u003cli\u003e300 lb total load capacity\u003c\/li\u003e\n\u003cli\u003eExpanded aluminum mesh floor drains debris and adds tie-down points\u003c\/li\u003e\n\u003cli\u003eRemovable bolt-in hitch tube for shipping and storage\u003c\/li\u003e\n\u003cli\u003eLightweight, rust- and corrosion-resistant aluminum. Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eAvailable in three tray sizes so you can match the carrier to your equipment and hitch. Measure your scooter or wheelchair footprint before choosing—the load should sit fully within the tray with room to strap down.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"4'L x 32\"W x 6\"H","offer_id":48372312572074,"sku":"FSM-432 ACC-TG","price":778.24,"currency_code":"USD","in_stock":true},{"title":"4'L x 36\"W x 6\"H","offer_id":48372312604842,"sku":"FSM-436 ACC-TG","price":829.44,"currency_code":"USD","in_stock":true},{"title":"5'L x 28\"W x 6\"H","offer_id":48372312637610,"sku":"FSM-528 ACC-TG","price":957.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Tailgate_Ramp_Cargo_Carrier_1.jpg?v=1780528104"},{"product_id":"five-star-telescoping-aluminum-ramp-pair","title":"Five Star Telescoping Aluminum Loading Ramp Pair | Adjustable 4 ft to 7 ft","description":"\u003ch4\u003eFive Star Telescoping Aluminum Loading Ramp Pair | Adjustable 4 ft to 7 ft\u003c\/h4\u003e\n\u003cp\u003eA pair of telescoping ramps that adjust to any length within their range to match your loading height, then collapse down to about 4 ft for easy transport and storage. Extend them to suit a tall tailgate or trailer deck, shorten them for a low step, and slide them back together when you're done—no fixed length to work around.\u003c\/p\u003e\n\u003cp\u003eEach ramp uses a distinctive \"W\" cross section that adds strength while forming side rails along both edges, helping keep wheels and casters tracking on the ramp. The pair is finished with plate end supports for a solid connection at the top and surfaced with traction tape for sure grip in use.\u003c\/p\u003e\n\u003cp\u003eBuilt from tempered aluminum, the ramps stay light enough to position and adjust by hand—35 lb for the pair—while resisting the rust and corrosion that affect steel ramps in wet and outdoor conditions. Like every Five Star product, they're MIG welded by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum products in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose these telescoping ramps\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable length to match your loading height, from about 4 ft to 7 ft\u003c\/li\u003e\n\u003cli\u003eCollapses to roughly 4 ft for compact transport and storage\u003c\/li\u003e\n\u003cli\u003e\"W\" cross section adds strength and forms side rails to keep equipment tracking\u003c\/li\u003e\n\u003cli\u003ePlate end supports for a solid connection at the top\u003c\/li\u003e\n\u003cli\u003eTraction-tape surface for sure grip\u003c\/li\u003e\n\u003cli\u003e450 lb total load capacity\u003c\/li\u003e\n\u003cli\u003eLightweight, rust- and corrosion-resistant aluminum. Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCommon uses\u003c\/h4\u003e\n\u003cp\u003eThe adjustable length and side rails suit loading mobility equipment such as scooters and unoccupied wheelchairs, plus other wheeled gear that benefits from a guided track. Match the load rating to the full weight of what you're loading, and choose a length that keeps the loading angle as gentle as your space allows.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"Default Title","offer_id":48372312703146,"sku":"FSM-TWC-7","price":497.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Telescoping_Aluminum_Loading_Pair_4.jpg?v=1780529348"},{"product_id":"five-star-trifold-aluminum-loading-ramp","title":"Five Star Tri-Fold Aluminum Loading Ramp | ATV, Mower \u0026 Equipment Ramp","description":"\u003ch4\u003eFive Star Tri-Fold Aluminum Loading Ramp | ATV, Mower \u0026amp; Equipment Ramp\u003c\/h4\u003e\n\u003cp\u003eLoad ATVs, riding mowers, and other four-wheel equipment with a single ramp that folds into three sections for compact transport and storage, then opens into one wide, fixed-width loading surface. Compared to a bi-fold, the tri-fold gives you a wider platform—handy when you need more room under the tires or extra confidence during loading. There's no lining up two separate ramps to match your wheelbase: set it, strap it, and load.\u003c\/p\u003e\n\u003cp\u003eBuilt from 6000-series tempered, aircraft-grade aluminum, this ramp stays light enough to position and set up by hand while resisting the rust and corrosion that affect steel ramps in wet and outdoor conditions. Each ramp is MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose a tri-fold ramp\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFolds into three sections for compact transport and storage\u003c\/li\u003e\n\u003cli\u003eOpens to a single, wide fixed-width loading surface—wider than a bi-fold\u003c\/li\u003e\n\u003cli\u003eIdeal for ATVs, riding mowers, and four-wheel equipment\u003c\/li\u003e\n\u003cli\u003eFull-center models available for three-wheel and offset-wheel applications\u003c\/li\u003e\n\u003cli\u003eLightweight 6000-series tempered aluminum; rust- and corrosion-resistant\u003c\/li\u003e\n\u003cli\u003eMIG-welded aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size and configuration\u003c\/h4\u003e\n\u003cp\u003eAvailable in multiple lengths, widths, and load ratings, plus full-center and double-rod configurations, so you can match the ramp to your equipment and loading height:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLengths:\u003c\/strong\u003e 6 ft and 6 ft 10 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidths:\u003c\/strong\u003e 51 in and 60 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 1,000 lb or 1,500 lb (distributed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull center (FC):\u003c\/strong\u003e adds a solid center section—the correct choice for three-wheel or offset-wheel equipment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble rod (DR):\u003c\/strong\u003e reinforced rod configuration for added support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA longer ramp creates a lower, safer loading angle—helpful for taller tailgates, trailer decks, and lower-clearance equipment. Because a tri-fold opens to a fixed width, choose a width that fully supports your equipment's tires. Always select a load rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"6' \/ 51\" \/ 1000","offer_id":48372570620074,"sku":"FSM-451TF","price":435.2,"currency_code":"USD","in_stock":true},{"title":"6' \/ 51\" \/ 1500","offer_id":48372570652842,"sku":"FSM-451TFH","price":446.72,"currency_code":"USD","in_stock":true},{"title":"6' \/ 60\" \/ 1500","offer_id":48372570685610,"sku":"FSM-460TFH","price":492.8,"currency_code":"USD","in_stock":true},{"title":"6' \/ 60\" \/ 1500 (Full Center)","offer_id":48372570718378,"sku":"FSM-460TFHFC","price":582.4,"currency_code":"USD","in_stock":true},{"title":"6' \/ 60\" \/ 1500 (Full Center-Double Rod )","offer_id":48372570751146,"sku":"FSM-460TFHFCDR","price":664.32,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 51\" \/ 1000","offer_id":48372570783914,"sku":"FSM-751TF","price":454.4,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 51\" \/ 1500","offer_id":48372570816682,"sku":"FSM-751TFH","price":510.72,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 60\" \/ 1500","offer_id":48372570849450,"sku":"FSM-760TFH","price":565.76,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 60\" \/ 1500 (Full Center)","offer_id":48372570882218,"sku":"FSM-760TFHFC","price":657.92,"currency_code":"USD","in_stock":true},{"title":"6'10\" \/ 60\" \/ 1500 (Full Center-Double Rod )","offer_id":48372570914986,"sku":"FSM-760TFHFCDR","price":748.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramp_FSM_trifold_1.jpg?v=1780523548"},{"product_id":"yutrax-90-folding-arched-ramps","title":"Yutrax Folding Loading Ramps | Arched | 90 in x 12 in | 1,500 lb Capacity | Embossed Rung | Pair","description":"\u003c!-- YR401 --\u003e\n\u003ch4\u003eYutrax Folding Loading Ramps | Arched | 90 in x 12 in | 1,500 lb Capacity | Embossed Rung | Pair\u003c\/h4\u003e\n\u003cp\u003eThe Yutrax 90 in Folding Arched Ramps are folding loading ramps that come down to 46 in x 12 in x 6 in - roughly half their deployed length. That is the whole point of them: a 90 in ramp that has to live in the truck or on a garage shelf between jobs is awkward, and a 46 in one is not. Deployed, each ramp is 90 in x 12 in, and the pair weighs 30 lb.\u003c\/p\u003e\n\u003cp\u003eThe deck is embossed rung. Each rung carries an embossed surface for traction while loading and unloading, and the wide rung design holds the gap between rungs to 3-1\/2 in so small-wheeled equipment rolls up without dropping in. A full-width top plate maximizes the connection between the ramp and your truck or trailer.\u003c\/p\u003e\n\u003cp\u003eThe arched profile prevents bottoming out when loading low-clearance equipment such as mowers and golf carts. As a pair the ramps carry 1,500 lb, or 750 lb per ramp, and Yutrax rates them for ATVs, riding lawn mowers, golf carts and other small-wheeled equipment.\u003c\/p\u003e\n\u003cp\u003eConstruction is high-strength extruded aluminum with an all-welded design, so no parts work loose over time. The aluminum is rustproof and stands up to corrosion, which matters for equipment stored in an open bed or an unheated garage. There is nothing to assemble - the ramps fold and unfold ready to use. A set of adjustable safety straps is included to secure the ramps to your vehicle. Sold as a pair in a single configuration.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFolds to 46 in x 12 in x 6 in for transport and storage\u003c\/li\u003e\n\u003cli\u003eEmbossed rung deck for traction loading and unloading\u003c\/li\u003e\n\u003cli\u003eWide rung design, 3-1\/2 in rung gap for small-wheeled equipment\u003c\/li\u003e\n\u003cli\u003eArched profile prevents bottoming out on low-clearance equipment\u003c\/li\u003e\n\u003cli\u003e1,500 lb capacity per pair (750 lb per ramp)\u003c\/li\u003e\n\u003cli\u003eFull-width top plate for a solid connection to bed or trailer\u003c\/li\u003e\n\u003cli\u003eHigh-strength extruded aluminum, all-welded, rustproof\u003c\/li\u003e\n\u003cli\u003e30 lb per pair; adjustable safety straps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eYutrax, a division of Ardisam Incorporated, provides a one-year limited warranty against defects in materials and workmanship for the service life of the product, not to exceed twelve consecutive months from the date of purchase. It applies to the original owner with proof of purchase and is not transferable. Coverage does not apply to products subjected to negligent use, misuse, alteration, or accident, or to products repaired by anyone outside the factory. This warranty supersedes all other warranties, express or implied. Warranty work must be performed by Ardisam or an authorized service center, and requires prior approval and a return material authorization (RMA) number before shipping; all items ship prepaid. Ardisam will repair or replace any qualifying defective part at its discretion at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTo register a new product for warranty coverage or submit a warranty claim, please visit Yutrax at: https:\/\/yutrax.com\/pages\/product-warranty.\u003c\/p\u003e","brand":"Yutrax","offers":[{"title":"Default Title","offer_id":48982110896298,"sku":"YU-YR401","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/YR401_A_040623-WEB.png?v=1785706600"},{"product_id":"yutrax-90-arched-ramps","title":"Yutrax Arched ATV Loading Ramps | 90 in x 12 in | 1,500-3,000 lb Capacity | Pair","description":"\u003c!-- YR500 + YR501 --\u003e\n\u003ch4\u003eYutrax Arched ATV Loading Ramps | 90 in x 12 in | 1,500-3,000 lb Capacity | Pair\u003c\/h4\u003e\n\u003cp\u003eThe Yutrax 90 in Arched Ramps are one-piece ATV loading ramps - each ramp is a single welded aluminum section with no hinge and no fold joint. The all-welded design means no parts to work loose over time, and setup is nothing more than setting the ramps in place. The trade-off is honest: you are carrying and storing a full 90 in of ramp, which is why the folding models exist.\u003c\/p\u003e\n\u003cp\u003eThe arched profile prevents bottoming out when loading low-clearance equipment such as mowers and golf carts. On the deck, the wide rung design keeps the gap between rungs to 4 in, so small-wheeled equipment rolls up smoothly, and each rung is embossed for traction while loading and unloading. A full-width top plate maximizes the connection between the ramp and your truck bed or trailer deck.\u003c\/p\u003e\n\u003cp\u003eTwo capacities are available, and they are rated for different equipment. \u003cstrong\u003e1,500 lb per pair\u003c\/strong\u003e (750 lb per ramp), 25 lb per pair, rated for ATVs, riding lawn mowers, golf carts and other small-wheeled equipment. \u003cstrong\u003e3,000 lb per pair \u003c\/strong\u003e(1500 lb per ramp), 35 lb per pair, with heavy-duty side rails for the greater load rating, rated for UTVs in addition to ATVs, riding lawn mowers, golf carts and small-wheeled equipment. Load ratings are for the pair, with each ramp supporting one side of the load. Choose a rating comfortably above the loaded weight of your equipment.\u003c\/p\u003e\n\u003cp\u003eBoth capacities measure 90 in x 12 in per ramp and are built from high-strength extruded aluminum, rustproof and corrosion-resistant for years of outdoor use. A set of adjustable safety straps is included to secure the ramps to your vehicle.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece welded aluminum - no hinge, no fold joint, no parts to loosen\u003c\/li\u003e\n\u003cli\u003eChoice of 1,500 lb or 3,000 lb capacity per pair\u003c\/li\u003e\n\u003cli\u003e3,000 lb version adds heavy-duty side rails and a UTV rating\u003c\/li\u003e\n\u003cli\u003eArched profile prevents bottoming out on low-clearance equipment\u003c\/li\u003e\n\u003cli\u003eWide rung design, 4 in rung gap, embossed rungs for traction\u003c\/li\u003e\n\u003cli\u003eFull-width top plate for a solid connection to bed or trailer\u003c\/li\u003e\n\u003cli\u003e90 in x 12 in per ramp; 25 lb or 35 lb per pair\u003c\/li\u003e\n\u003cli\u003eAdjustable safety straps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eYutrax, a division of Ardisam Incorporated, provides a one-year limited warranty against defects in materials and workmanship for the service life of the product, not to exceed twelve consecutive months from the date of purchase. It applies to the original owner with proof of purchase and is not transferable. Coverage does not apply to products subjected to negligent use, misuse, alteration, or accident, or to products repaired by anyone outside the factory. This warranty supersedes all other warranties, express or implied. Warranty work must be performed by Ardisam or an authorized service center, and requires prior approval and a return material authorization (RMA) number before shipping; all items ship prepaid. Ardisam will repair or replace any qualifying defective part at its discretion at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTo register a new product for warranty coverage or submit a warranty claim, please visit Yutrax at: https:\/\/yutrax.com\/pages\/product-warranty.\u003c\/p\u003e","brand":"Yutrax","offers":[{"title":"1500 lb","offer_id":48993038205098,"sku":"YU-YR500","price":229.99,"currency_code":"USD","in_stock":true},{"title":"3000 lb","offer_id":48993038237866,"sku":"YU-YR501","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/YR500_A_040323_WEB.png?v=1785706487"},{"product_id":"yutrax-69-utility-ramps","title":"Yutrax 69 in Lightweight ATV Ramps | Pair | 15 in Wide | 1500 lb","description":"\u003ch4\u003eYutrax 69 in Lightweight ATV Ramps | Pair | 15 in Wide | 1500 lb\u003c\/h4\u003e\n\u003cp\u003eThe Yutrax 69 in Utility Ramps are lightweight ATV ramps sold as a pair, and at 17 lb for both they are the lightest pair Yutrax builds. That is the reason to pick them: you carry both ramps to the tailgate in one trip, set them, and put them away without help.\u003c\/p\u003e\n\u003cp\u003eTogether the pair carries a 1,500 lb load capacity (750 lb each), rated for loading ATVs and riding lawn mowers. Each ramp is 69 in long and 15 in wide, the widest deck in the utility range, with a 7 in rung gap.\u003c\/p\u003e\n\u003cp\u003eConstruction is durable extruded aluminum, all-welded so no parts become loose over time. The aluminum is rustproof and stands up to corrosion, which is what keeps a ramp usable for years when it lives in a truck bed or leans against a shed wall. Coated tabs protect your tailgate and prevent scratching.\u003c\/p\u003e\n\u003cp\u003eThere is nothing to assemble: each ramp is a single welded piece. A set of adjustable safety straps is included to secure the ramps to your vehicle.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLightest pair in the Yutrax range at 17 lb for both ramps\u003c\/li\u003e\n\u003cli\u003eEasy one-person handling and setup\u003c\/li\u003e\n\u003cli\u003e1,500 lb combined capacity (750 lb each)\u003c\/li\u003e\n\u003cli\u003eMade for loading ATVs and riding lawn mowers\u003c\/li\u003e\n\u003cli\u003e69 in long x 15 in wide per ramp\u003c\/li\u003e\n\u003cli\u003eAll-welded extruded aluminum, single piece, no assembly\u003c\/li\u003e\n\u003cli\u003eRustproof and corrosion resistant\u003c\/li\u003e\n\u003cli\u003eCoated tabs protect your tailgate; adjustable safety straps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eYutrax, a division of Ardisam Incorporated, provides a one-year limited warranty against defects in materials and workmanship for the service life of the product, not to exceed twelve consecutive months from the date of purchase. It applies to the original owner with proof of purchase and is not transferable. Coverage does not apply to products subjected to negligent use, misuse, alteration, or accident, or to products repaired by anyone outside the factory. This warranty supersedes all other warranties, express or implied. Warranty work must be performed by Ardisam or an authorized service center, and requires prior approval and a return material authorization (RMA) number before shipping; all items ship prepaid. Ardisam will repair or replace any qualifying defective part at its discretion at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTo register a new product for warranty coverage or submit a warranty claim, please visit Yutrax at: https:\/\/yutrax.com\/pages\/product-warranty.\u003c\/p\u003e","brand":"Yutrax","offers":[{"title":"Default Title","offer_id":48982111387818,"sku":"YU-TX195","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/TX195-1-Studio-050223-WEB.png?v=1785706258"},{"product_id":"yutrax-89-folding-arched-ramps","title":"Yutrax Folding Arched Golf Cart Loading Ramps | 89 in x 12-1\/2 in | 1,500 lb Capacity | Mesh Deck | Pair","description":"\u003c!-- TX107 --\u003e\n\u003ch4\u003eYutrax Folding Arched Golf Cart Loading Ramps | 89 in x 12-1\/2 in | 1,500 lb Capacity | Mesh Deck | Pair\u003c\/h4\u003e\n\u003cp\u003eThe Yutrax 89 inch Folding Arched Ramps are golf cart loading ramps built around a mesh deck instead of spaced rungs. The deck is a continuous open mesh surface, so traction is the same everywhere a tire lands rather than only where a rung sits - and small wheels, casters and jockey wheels have no gap to drop into. That is the difference that matters when what you are loading rolls on something smaller than an ATV tire.\u003c\/p\u003e\n\u003cp\u003eThe arched profile prevents bottoming out when loading low-clearance equipment. As a pair the ramps carry 1,500 lb, which is 750 lb per ramp, and Yutrax rates them for ATVs, riding lawn mowers, golf carts and other small-wheeled equipment.\u003c\/p\u003e\n\u003cp\u003eEach ramp is built from high-strength extruded aluminum with an all-welded design, so no parts work loose over time. Aluminum construction is rustproof and stands up to corrosion, which matters for ramps that live outdoors or in an open truck bed. Coated tabs at the top end sit on your tailgate and protect it from scratching.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 89 in x 12-1\/2 in deployed and folds to 45 in x 12-1\/2 x 7 in. The pair weighs 34 lb, so one person can carry, set and stow them. Nothing to assemble - unfold, set, and load. A pair of adjustable safety straps is included to secure the ramps to your vehicle. Sold as a pair in a single configuration.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMesh deck gives continuous traction with no rung gaps for small wheels or casters\u003c\/li\u003e\n\u003cli\u003eArched profile prevents bottoming out on low-clearance equipment\u003c\/li\u003e\n\u003cli\u003e1,500 lb capacity per pair (750 lb per ramp)\u003c\/li\u003e\n\u003cli\u003eHigh-strength extruded aluminum, all-welded, rustproof\u003c\/li\u003e\n\u003cli\u003eFolds to 45 in x 12-1\/2 in x 7 in for transport and storage\u003c\/li\u003e\n\u003cli\u003e34 lb per pair - one-person setup, no assembly\u003c\/li\u003e\n\u003cli\u003eCoated tabs protect your tailgate from scratches\u003c\/li\u003e\n\u003cli\u003eAdjustable safety straps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eYutrax, a division of Ardisam Incorporated, provides a one-year limited warranty against defects in materials and workmanship for the service life of the product, not to exceed twelve consecutive months from the date of purchase. It applies to the original owner with proof of purchase and is not transferable. Coverage does not apply to products subjected to negligent use, misuse, alteration, or accident, or to products repaired by anyone outside the factory. This warranty supersedes all other warranties, express or implied. Warranty work must be performed by Ardisam or an authorized service center, and requires prior approval and a return material authorization (RMA) number before shipping; all items ship prepaid. Ardisam will repair or replace any qualifying defective part at its discretion at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTo register a new product for warranty coverage or submit a warranty claim, please visit Yutrax at: https:\/\/yutrax.com\/pages\/product-warranty.\u003c\/p\u003e","brand":"Yutrax","offers":[{"title":"Default Title","offer_id":48982111420586,"sku":"YU-TX107","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/TX107-1-Studio-050223-WEB.png?v=1785706405"},{"product_id":"yutrax-69-bi-fold-ramp","title":"Yutrax 69 in Bi-Fold Loading Ramp | 48 in Wide | 1250 lb | Single Piece","description":"\u003ch4\u003eYutrax 69 in Bi-Fold Loading Ramp | 48 in Wide | 1250 lb | Single Piece\u003c\/h4\u003e\n\u003cp\u003eThe Yutrax 69 in Bi-Fold Loading Ramp is a single-piece ramp with a 48 in wide deck that spans the width of your tailgate. There is no lining up two separate ramps to match your ATV's wheelbase: you set one ramp, strap it, and drive up a continuous surface.\u003c\/p\u003e\n\u003cp\u003eThe 1,250 lb load capacity is rated for loading ATVs. At 69 in long and 20 lb, it stays light enough to position and set up by hand, and the 7 in rung gap keeps the deck open and light without giving up footing.\u003c\/p\u003e\n\u003cp\u003eThe ramp is built from durable extruded aluminum with an all-welded design, so no parts become loose over time. The aluminum construction is rustproof and stands up to corrosion, which gives you many years of use out of a ramp that lives outdoors. Coated tabs protect your tailgate and prevent scratching where the ramp makes contact.\u003c\/p\u003e\n\u003cp\u003eFolded, the ramp measures 69 x 24-1\/2 x 5 in, compact and easy to store and a good fit for short-bed trucks where storage space is the constraint. No assembly is required; it folds and unfolds. A pair of adjustable safety straps is included to secure the ramp to your vehicle.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBi-fold ramp spans the width of your tailgate: one ramp, no wheelbase lineup\u003c\/li\u003e\n\u003cli\u003e1,250 lb load capacity, made for loading ATVs\u003c\/li\u003e\n\u003cli\u003e69 in long x 48 in wide deck\u003c\/li\u003e\n\u003cli\u003eLightweight at 20 lb for easy handling\u003c\/li\u003e\n\u003cli\u003eFolds to 69 x 24-1\/2 x 5 in; compact enough for short-bed trucks\u003c\/li\u003e\n\u003cli\u003eAll-welded extruded aluminum; rustproof and corrosion resistant\u003c\/li\u003e\n\u003cli\u003eCoated tabs protect your tailgate\u003c\/li\u003e\n\u003cli\u003eAdjustable safety straps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eYutrax, a division of Ardisam Incorporated, provides a one-year limited warranty against defects in materials and workmanship for the service life of the product, not to exceed twelve consecutive months from the date of purchase. It applies to the original owner with proof of purchase and is not transferable. Coverage does not apply to products subjected to negligent use, misuse, alteration, or accident, or to products repaired by anyone outside the factory. This warranty supersedes all other warranties, express or implied. Warranty work must be performed by Ardisam or an authorized service center, and requires prior approval and a return material authorization (RMA) number before shipping; all items ship prepaid. Ardisam will repair or replace any qualifying defective part at its discretion at no charge.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTo register a new product for warranty coverage or submit a warranty claim, please visit Yutrax at: https:\/\/yutrax.com\/pages\/product-warranty.\u003c\/p\u003e","brand":"Yutrax","offers":[{"title":"Default Title","offer_id":48982111486122,"sku":"YU-TX102","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/TX102-Studio-050223-WEB.png?v=1785706382"},{"product_id":"hd-ramps-72-ez-deck-step-semi-trailer-step-ladder-adjustable-54-66-375-lbs-capacity","title":"HD Ramps EZ Deck Step Truck Step Ladder | Aluminum Folding | 48 in, 60 in, 72 in | 375 lbs Capacity","description":"\u003ch4\u003eHD Ramps EZ Deck Step Truck Step Ladder | Aluminum Folding | 48 in, 60 in, 72 in | 375 lbs Capacity\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps EZ Deck Step® truck step ladder gives safe, repeatable access to upper and lower trailer decks instead of climbing on tires and frame rails. It attaches to trailer rub rails with two pin clamps and needs no tools to mount or remove, and it works on flatbeds, step decks, and box trucks. The design is covered by US Patent #8640826.\u003c\/p\u003e\n\u003cp\u003eThree lengths cover different deck heights: the 48 in ladder adjusts from 28 in to 42 in and weighs 15 lbs; the 60 in ladder adjusts from 48 in to 52 in and weighs 20 lbs; the 72 in ladder adjusts from 36 in to 66 in and weighs 20 lbs. All three are 16 in wide, fold to 3 in for storage, and hold up to 375 lbs.\u003c\/p\u003e\n\u003cp\u003eAluminum construction keeps each ladder light enough to carry one-handed between uses. Heavy-duty caster wheels let you roll and pivot the ladder away from the trailer even under a heavy load, and included C-brackets bolt to the trailer so the ladder stores upright on the deck. The ladder locks in its stored position and accepts a standard padlock for security; padlock is not included. Optional mounting brackets (#Ladder-Bracket-2) are sold separately. Sold individually. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e375 lbs weight capacity across all lengths\u003c\/li\u003e\n\u003cli\u003eThree lengths: 48 in (28-42 in), 60 in (48-52 in), 72 in (36-66 in)\u003c\/li\u003e\n\u003cli\u003eTool-free pin-clamp attachment to trailer rub rails\u003c\/li\u003e\n\u003cli\u003eHeavy-duty casters roll and pivot under load\u003c\/li\u003e\n\u003cli\u003eFolds to 3 in for storage; 16 in wide\u003c\/li\u003e\n\u003cli\u003eIncludes C-brackets for upright on-deck storage\u003c\/li\u003e\n\u003cli\u003eLocks in stored position; padlock not included\u003c\/li\u003e\n\u003cli\u003eUS Patent #8640826; made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"48\"","offer_id":49025277755562,"sku":"HD-LADDER-16-48","price":304.0,"currency_code":"USD","in_stock":true},{"title":"60\"","offer_id":49025277788330,"sku":"HD-LADDER-16-60","price":314.0,"currency_code":"USD","in_stock":true},{"title":"72\"","offer_id":49025277821098,"sku":"HD-LADDER-16-72","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/EZ_Deck_Step_Semi-Trailer_Step_Ladder_48_Ladder-16-48.jpg?v=1785794071"},{"product_id":"hd-ramps-aluminum-hook-end-ramps-14x16-with-12-000-lbs-capacity","title":"HD Ramps Aluminum Heavy Equipment Ramps | 7,000-12,000 lb per Axle | Hook End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Heavy Equipment Ramps | 7,000-12,000 lb per Axle | Hook End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum heavy equipment ramps use a hook attaching end that drops over the trailer's angle iron or rub rail — no brackets, no hardware, no bolt-up — and come in four capacity and size combinations from 7,000 lb to 12,000 lb per axle. That range covers everything from loading a car or light equipment onto a utility trailer up to putting a loaded skid steer on a tandem-axle deck. Every version uses a serrated rung surface for traction in rain, snow, and mud.\u003c\/p\u003e\n\u003cp\u003eConfigurations, per ramp: 7 ft 6 in x 15 in rated 7,000 lb per axle, 36 lb, 3-1\/4 in high, covering 20 in to 24 in rises, knife foot. 7 ft 6 in x 14 in rated 10,000 lb per axle, 47 lb, 4-1\/4 in high, covering 24 in to 36 in rises, stub foot. 14 ft x 16 in rated 8,000 lb per axle, 96 lb, 4-1\/4 in high, covering 36 in to 42 in rises, knife foot. 14 ft x 16 in rated 12,000 lb per axle, 115 lb, 6-1\/4 in high, covering 36 in to 42 in rises, knife foot. Capacity is per axle; all other figures are per ramp.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCapacities from 7,000 lb to 12,000 lb per axle\u003c\/li\u003e\n\u003cli\u003eHook end attaches with no brackets or hardware\u003c\/li\u003e\n\u003cli\u003eLengths of 7 ft 6 in and 14 ft\u003c\/li\u003e\n\u003cli\u003eRise coverage from 20 in to 42 in depending on configuration\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface on every version\u003c\/li\u003e\n\u003cli\u003e36 lb to 115 lb per ramp\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"7' 6\" \/ 10,000 lb per axle","offer_id":49025277952170,"sku":"HD-10-14-090-05-S","price":1268.0,"currency_code":"USD","in_stock":true},{"title":"7' 6\" \/ 7,000 lb per axle","offer_id":49025277984938,"sku":"HD-07-15-090-04","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 12,000 lb per axle","offer_id":49025278017706,"sku":"HD-12-16-168-05","price":2989.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 8,000 lb per axle","offer_id":49025278050474,"sku":"HD-08-16-168-05","price":2273.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/7_6_x_14_Aluminum_Ramps_Hook_Ends_hook_in_use_by_a_bulldozer.jpg?v=1785793841"},{"product_id":"hd-ramps-710-aluminum-plate-end-car-trailer-ramps-5-000-lb-capacity","title":"HD Ramps Aluminum Car Ramps for Trailer | 5,000 lb per Axle | Plate End | 7 ft 10 in - 16 ft L x 15-18 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Car Ramps for Trailer | 5,000 lb per Axle | Plate End | 7 ft 10 in - 16 ft L x 15-18 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum car ramps for trailer loading carry 5,000 lb per axle and are built for car haulers, restoration shops, dealers, and anyone moving vehicles onto an open trailer or flat deck. Each ramp uses a full-width plate attaching end that rests on the trailer deck and a knife foot that meets the ground at a shallow angle, so low-clearance vehicles roll on without catching. The serrated rung surface holds traction in rain, snow, and mud.\u003c\/p\u003e\n\u003cp\u003eFour sizes are available. The 7 ft 10 in x 15 in ramp weighs 37 lb per ramp, stands 3-1\/4 in high, and covers rises from 16 in to 24 in. The 10 ft x 16 in weighs 47 lb, stands 4-3\/4 in, and covers 20 in to 36 in. The 12 ft x 16 in weighs 65 lb, stands 4-1\/4 in, and covers 24 in to 36 in. The 16 ft x 18 in weighs 99 lb, stands 5-1\/4 in, and covers 36 in to 42 in. Dimensions, weights, and rise ranges are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003ePlate attaching end with knife foot for low-clearance vehicles\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface for wet and muddy traction\u003c\/li\u003e\n\u003cli\u003eFour sizes from 7 ft 10 in to 16 ft long\u003c\/li\u003e\n\u003cli\u003eRise coverage from 16 in to 42 in depending on size\u003c\/li\u003e\n\u003cli\u003e37 lb to 99 lb per ramp\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"7' 10\" \/ 15\"","offer_id":49025278083242,"sku":"HD-05-15-094-06","price":1188.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\"","offer_id":49025278116010,"sku":"HD-05-16-120-06","price":1445.0,"currency_code":"USD","in_stock":true},{"title":"12' \/ 16\"","offer_id":49025278148778,"sku":"HD-05-16-144-06","price":1737.0,"currency_code":"USD","in_stock":true},{"title":"16' \/ 18\"","offer_id":49025278181546,"sku":"HD-05-18-192-06","price":2693.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/7_10_Aluminum_Plate_End_Car_Trailer_Ramps_5_000_lb._Capacity_05-15-094-06.jpg?v=1785793884"},{"product_id":"hd-ramps-adjustable-heavy-duty-lower-ramp-support-stands-18-24-23-500-lbs-capacity","title":"HD Ramps Adjustable Heavy-Duty Ramp Jack Stand Set | Aluminum | 18-24 in Height | 23,500 lbs Per Axle","description":"\u003ch4\u003eHD Ramps Adjustable Heavy-Duty Ramp Jack Stand Set | Aluminum | 18-24 in Height | 23,500 lbs Per Axle\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps ramp jack stands give loading ramps a rated, adjustable base instead of stacked blocks or fixed-height supports that do not quite reach. Height adjusts from 18 in to 24 in with locking pin positions, and each stand carries 23,500 lbs per axle — enough for tractors, loaders, and other heavy construction equipment moving onto a step deck or flatbed.\u003c\/p\u003e\n\u003cp\u003eStands are high-strength aluminum with integrated pin-on attachment points that seat pin-end ramps securely. Each stand measures 25-1\/2 in L x 18 in W x 18 in H at minimum height and weighs 42 lbs, light enough to reposition by hand between loads.\u003c\/p\u003e\n\u003cp\u003eBuilt for heavy haulers, construction logistics, and step deck operators who need mid-point or lower-point stability during the transition onto the deck. Supplied as a set of two stands. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e23,500 lbs capacity per axle\u003c\/li\u003e\n\u003cli\u003eHeight adjusts 18-24 in with locking pin positions\u003c\/li\u003e\n\u003cli\u003eIntegrated pin-on attachment points for pin-end ramps\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum, 42 lbs per stand\u003c\/li\u003e\n\u003cli\u003e25-1\/2 in L x 18 in W x 18 in H at minimum height\u003c\/li\u003e\n\u003cli\u003eSupplied as a set of two stands\u003c\/li\u003e\n\u003cli\u003eFor step deck, drop deck, and flatbed loading\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004310102186,"sku":"HD-STAND-10-16-18-24-H","price":1408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Adjustable_Heavy-Duty_Lower_Ramp_Support_Stands_STAND-10-16-18-24-H.jpg?v=1785793888"},{"product_id":"hd-ramps-16-l-x-20-w-4-bunk-load-leveler-4-ramp-system-for-20-h-step-deck-trailers-23-500-lb-capacity","title":"HD Ramps 4 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 4 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 4 bunk load leveler system gives a 102 in wide step deck trailer four load leveler bunks and a 16 ft ramp run, without the storage hardware of the master kit. If your ramps already have a hanger setup, or you store them on the deck, this is the configuration that skips what you do not need.\u003c\/p\u003e\n\u003cp\u003eFour 8 ft aluminum ramp sections assemble into a 16 ft run with two adjustable support stands controlling the approach angle. All four ramps convert to load leveler bunks: turn them on their side, drop them into stakes seated in the stake pockets, and you have four leveled support points across the upper step.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus four load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 508 lb to 700 lb, roughly 145 lb to 180 lb lighter than the equivalent master kit.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramps, two support stands, 12 lumber clips, and eight stake pocket supports. The 24 in and 26 in configurations add four load leveler spacers. Ramp hanger brackets, stand hanger brackets, attaching brackets, bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour load leveler bunks with a 16 ft assembled ramp run\u003c\/li\u003e\n\u003cli\u003eNo hanger hardware, for haulers who already store their ramps\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes 12 lumber clips and eight stake pocket supports\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 508 lb to 700 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276084394,"sku":"HD-20-16-192-02-02-MLL-4","price":6720.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276117162,"sku":"HD-23-18-192-02-02-MLL-4","price":7212.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276149930,"sku":"HD-23-20-192-02-02-MLL-4","price":7751.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276182698,"sku":"HD-23-24-192-02-02-MLL-4","price":8325.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276215466,"sku":"HD-23-26-192-02-02-MLL-4","price":8753.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/16_L_x_16_W_4_Bunk_Load_Leveler_4_Ramp_System_for_16_H_Step_Deck_Trailers_20-16-192-02-02-MLL-4_ramp_in_use_by_a_tractor.jpg?v=1785793926"},{"product_id":"hd-ramps-2-bunk-load-leveler-4-ramp-system-16x20-for-20-h-step-deck-trailers","title":"HD Ramps 2 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps step deck load leveler system pairs a 16 ft ramp run with two load leveler bunks, and is the most common configuration for haulers who need full-length loading and enough deck leveling for standard long freight. Four 8 ft aluminum ramp sections and two adjustable support stands handle loading; two of those ramps then convert to bunks for the haul.\u003c\/p\u003e\n\u003cp\u003eConversion takes minutes. Turn two ramps on their side, drop them into the adjustable stakes seated in the trailer's stake pockets, and the upper step is bridged with two leveled support points. The stakes fit all 102 in wide step deck trailers, 97 to 98 in measured inside the stake pockets, without modification.\u003c\/p\u003e\n\u003cp\u003eTwo bunks or four is the decision to make here. Two bunks cover most long freight and keep the kit lighter and cheaper. Four bunks, on the sibling 4 bunk system, add two more support points for loads that need them.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus two load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 452 lb to 580 lb.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramps, two support stands, six lumber clips, and four stake pocket supports. The 24 in and 26 in configurations add two load leveler spacers. Hanger hardware, bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e16 ft assembled ramp run with two load leveler bunks\u003c\/li\u003e\n\u003cli\u003eLightest of the four ramp kits at 452 lb to 580 lb\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eFits 102 in wide step deck trailers with no modification\u003c\/li\u003e\n\u003cli\u003eAluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025275691178,"sku":"HD-20-16-192-02-02-MLL-2","price":6175.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025275723946,"sku":"HD-23-18-192-02-02-MLL-2","price":6508.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025275756714,"sku":"HD-23-20-192-02-02-MLL-2","price":6978.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025275789482,"sku":"HD-23-24-192-02-02-MLL-2","price":7009.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025275822250,"sku":"HD-23-26-192-02-02-MLL-2","price":7480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/2_Bunk_Load_Leveler_4_Ramp_System_16_x16_for_16_H_Step_Deck_Trailers_23-18-192-02-02-MLL-2_bundled_products.jpg?v=1785793942"},{"product_id":"hd-ramps-2-bunk-load-leveler-2-ramp-system-8x20-for-26-h-step-deck-trailers","title":"HD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 2 bunk load leveler 2 ramp system is a dual-purpose kit for 102 in wide step deck trailers: a pair of 8 ft aluminum ramps for loading, and two load leveler bunks for hauling long freight across the step. Both jobs are handled by the same two ramps, so nothing extra rides along on the trailer.\u003c\/p\u003e\n\u003cp\u003eTo load, the pin-on ends slide into the trailer's stake pockets. To convert, the ramps are turned on their side and dropped into the adjustable stakes that seat in the same stake pockets, forming two level bunks that carry the load over the upper step drop. The stakes adjust to fit all 102 in wide step deck trailers, measuring 97 to 98 in from the inside of the stake pockets, with no trailer modification.\u003c\/p\u003e\n\u003cp\u003eChoose the configuration that matches your trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use ramps of matching width on a 5 in tube and are rated at 23,500 lb per axle. The 24 and 26 in configurations reach their height with 18 in and 20 in ramps plus two load leveler spacers, also rated at 23,500 lb per axle. Kit weight runs from 199 lb to 304 lb depending on configuration.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes two 8 ft ramps, six lumber clips, and four stake pocket supports, which works out to three lumber clips and two stake pocket supports per load leveler. The 24 in and 26 in configurations add two load leveler spacers. Bunk lumber, chains, and load binders are not included. The ramps are aluminum with a rung walking surface and are made in the USA.\u003c\/p\u003e\n\u003cp\u003eThis system is not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 8 ft aluminum ramps that convert into two load leveler bunks\u003c\/li\u003e\n\u003cli\u003eFits 102 in wide step deck trailers, 97 to 98 in inside the stake pockets\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes six lumber clips and four stake pocket supports\u003c\/li\u003e\n\u003cli\u003eKit weight 199 lb to 304 lb, set up by one person\u003c\/li\u003e\n\u003cli\u003eRung walking surface, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025275527338,"sku":"HD-20-16-096-02-02-MLL-2","price":2779.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025275560106,"sku":"HD-23-18-096-02-02-MLL-2","price":3025.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025275592874,"sku":"HD-23-20-096-02-02-MLL-2","price":3282.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025275625642,"sku":"HD-23-24-096-02-02-MLL-2","price":3582.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025275658410,"sku":"HD-23-26-096-02-02-MLL-2","price":3838.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_L_x_16_W_2_Bunk_Load_Leveler_2_Ramp_System_for_16_H_Step_Deck_Trailers_-_20_000_lb._Capacity_20-16-096-02-02-MLL-2.jpg?v=1785793826"},{"product_id":"hd-ramps-16-l-x-16-w-step-deck-trailer-ramp-kit-10-000-lb-capacity","title":"HD Ramps Step Deck Trailer Ramp Kit | 16 ft x 16 in Aluminum | 4 Ramp Sections and 2 Support Stands | 10,000 lb per Axle","description":"\u003ch4\u003eHD Ramps Step Deck Trailer Ramp Kit | 16 ft x 16 in Aluminum | 4 Ramp Sections and 2 Support Stands | 10,000 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps step deck trailer ramp kit is a 10,000 lb per axle modular loading system for flatbed and step deck trailers: four 8 ft by 16 in aluminum ramp sections and two adjustable center support stands, shipped as one kit.\u003c\/p\u003e\n\u003cp\u003eThe four sections assemble into a 16 ft run, or split into separate 8 ft upper and lower ramps when the load height is shorter. That flexibility is the point of the kit. Long wheelbase vehicles and low-clearance equipment need the shallower angle a 16 ft run gives, while a quick pickup load only needs 8 ft.\u003c\/p\u003e\n\u003cp\u003eThe two adjustable support stands set the ramp angle and prevent high-centering at the top of the run, which is the failure mode that damages bumpers and undercarriages on long vehicles. The stands adjust from 18 in to 24 in.\u003c\/p\u003e\n\u003cp\u003eThe kit suits trailers up to 40 in high, including flatbeds, step decks, loading docks, and vans, and handles cars, pickups, and commercial trucks up to class 6. Ramp sections have a pin-on attaching end and a stub foot. Each section is 16 in wide and 4-1\/4 in tall, and the complete kit weighs 360 lb. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eOptional lockable ramp hangers and support stand hangers store the whole kit beneath the trailer; these are sold separately. Skid seat brackets are also sold separately and should be pinned before use. Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections and two adjustable support stands in one kit\u003c\/li\u003e\n\u003cli\u003eRun as a full 16 ft system or split into separate 8 ft ramps\u003c\/li\u003e\n\u003cli\u003eSupport stands adjust from 18 in to 24 in to prevent high-centering\u003c\/li\u003e\n\u003cli\u003e10,000 lb per axle, for trailers and docks up to 40 in high\u003c\/li\u003e\n\u003cli\u003eHandles cars, pickups, and commercial trucks up to class 6\u003c\/li\u003e\n\u003cli\u003e16 in wide sections at a 4-1\/4 in profile, 360 lb complete\u003c\/li\u003e\n\u003cli\u003eAluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311019690,"sku":"HD-10-16-192-02-02M-S","price":4598.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/16_L_x_16_W_Step_Deck_Trailer_Ramp_Kit_10-16-192-02-02M-S_in_use_by_a_truck.jpg?v=1785793963"},{"product_id":"hd-ramps-lockable-underbody-trailer-toolbox-60x24x24-high-strength-aluminum","title":"HD Ramps Lockable Underbody Tool Box | 60 in Wide Aluminum | 18 in and 24 in Depths and Heights | 400 lbs Capacity","description":"\u003ch4\u003eHD Ramps Lockable Underbody Tool Box | 60 in Wide Aluminum | 18 in and 24 in Depths and Heights | 400 lbs Capacity\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps lockable underbody tool box adds secure, weather-sealed storage beneath a flatbed, platform, step deck, or dump body, so straps, chains, and tools ride with the truck without eating deck space. Every size holds up to 400 lbs.\u003c\/p\u003e\n\u003cp\u003eAll three sizes are 60 in wide and built from 1\/8 in thick high-strength aluminum with a smooth finish. The 60 x 18 x 18 in box weighs 73 lbs, the 60 x 24 in deep by 18 in high box weighs 83 lbs, and the 60 x 24 x 24 in box weighs 95 lbs. Pick the depth and height that clear your frame rails and suspension.\u003c\/p\u003e\n\u003cp\u003eA cam lock on the right side accepts a padlock (not included), and a rubber weather seal runs the full door perimeter to keep moisture and road grime off the contents. Boxes ship with standard aluminum doors and can be upgraded by the installer to polished aluminum or stainless steel. Mounting brackets and hardware are sold separately. Sold individually. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e400 lbs capacity in every size\u003c\/li\u003e\n\u003cli\u003e1\/8 in thick high-strength aluminum, smooth finish\u003c\/li\u003e\n\u003cli\u003eThree sizes, all 60 in wide, 73-95 lbs\u003c\/li\u003e\n\u003cli\u003eCam lock accepts a standard padlock\u003c\/li\u003e\n\u003cli\u003eFull-perimeter rubber weather seal\u003c\/li\u003e\n\u003cli\u003eFits flatbed, platform, step deck, and dump bodies\u003c\/li\u003e\n\u003cli\u003eMounting brackets and hardware sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Warranty (Product Specific)\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' 1-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"60\" x 18\" x 18\"","offer_id":49025277558954,"sku":"HD-TC-181860","price":1068.0,"currency_code":"USD","in_stock":true},{"title":"60\" x 18\" x 24\"","offer_id":49025277591722,"sku":"HD-TC-182460","price":1185.0,"currency_code":"USD","in_stock":true},{"title":"60\" x 24\" x 24\"","offer_id":49025277624490,"sku":"HD-TC-242460","price":1307.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Lockable_Underbody_Trailer_Tool_Cabinet_TC-181860.jpg?v=1785793810"},{"product_id":"hd-ramps-18-x-18-mounting-brackets-for-underbody-trailer-tool-cabinets","title":"HD Ramps Underbody Toolbox Mounting Brackets | Aluminum L-Shape | 18 x 18 in, 18 x 24 in, 24 x 24 in","description":"\u003ch4\u003eHD Ramps Underbody Toolbox Mounting Brackets | Aluminum L-Shape | 18 x 18 in, 18 x 24 in, 24 x 24 in\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps underbody toolbox mounting brackets are the L-shape supports that hang HD Ramps underbody tool cabinets from a trailer or truck body. Each order includes a matched left and right bracket, so one order mounts one cabinet.\u003c\/p\u003e\n\u003cp\u003eBrackets are high-strength aluminum, 2-1\/2 in wide, and sized to the cabinet they carry. Match the bracket to your cabinet by part number: TBB-18-18 for the 60 x 18 x 18 in cabinet, TBB-18-24-LR for the 60 in cabinet with the 24 in dimension, and TBB-24-24 for the 60 x 24 x 24 in cabinet. Bracket overall sizes are 18 x 18 in, 24 x 18 in, and 24 x 24 in respectively.\u003c\/p\u003e\n\u003cp\u003eAluminum resists corrosion in the under-body environment where road spray and de-icer collect. Mounting hardware is not included. Sold as a left and right set. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes matched left and right brackets\u003c\/li\u003e\n\u003cli\u003eThree sizes to match HD Ramps underbody tool cabinets\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum resists corrosion\u003c\/li\u003e\n\u003cli\u003e2-1\/2 in wide L-shape profile\u003c\/li\u003e\n\u003cli\u003eMatch by part number: TBB-18-18, TBB-18-24-LR, TBB-24-24\u003c\/li\u003e\n\u003cli\u003eMounting hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"18\" x 18\"","offer_id":49025277657258,"sku":"HD-TBB-18-18","price":198.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 24\"","offer_id":49025277690026,"sku":"HD-TBB-18-24-LR","price":246.0,"currency_code":"USD","in_stock":true},{"title":"24\" x 24\"","offer_id":49025277722794,"sku":"HD-TBB-24-24","price":246.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/18_x_18_Mounting_Brackets_for_Underbody_Trailer_Tool_Cabinets_TBB-18-18.jpg?v=1785794003"},{"product_id":"hd-ramps-bolt-on-semi-trailer-ramp-stand-storage-brackets-durable-aluminum","title":"HD Ramps Bolt-On Ramp Stand Storage Bracket Set | Aluminum | Lockable | For Semi-Trailers","description":"\u003ch4\u003eHD Ramps Bolt-On Ramp Stand Storage Bracket Set | Aluminum | Lockable | For Semi-Trailers\u003c\/h4\u003e\n\u003cp\u003eThis HD Ramps ramp stand storage bracket set bolts to the underside of a flatbed or step deck trailer and holds heavy-duty ramp support stands out of the way between loads. Stands stay accessible without taking up deck space or riding loose in a side box.\u003c\/p\u003e\n\u003cp\u003eBrackets are aluminum, so they will not rust under a trailer exposed to road spray and de-icer. The set weighs 26 lbs. A lockable pin system secures the stands against theft when the trailer is parked; padlock is not included.\u003c\/p\u003e\n\u003cp\u003eInstallation bolts directly to the trailer underside. Pairs with HD Ramps heavy-duty step deck ramp kits and adjustable ramp support stands. Supplied as a set of two brackets. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStores ramp support stands under the trailer deck\u003c\/li\u003e\n\u003cli\u003eAluminum construction resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003eLockable pin system deters theft\u003c\/li\u003e\n\u003cli\u003eBolt-on installation to the trailer underside\u003c\/li\u003e\n\u003cli\u003eSupplied as a set of two brackets, 26 lbs total\u003c\/li\u003e\n\u003cli\u003ePairs with HD Ramps heavy-duty ramp support stands\u003c\/li\u003e\n\u003cli\u003ePadlock and mounting hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311445674,"sku":"HD-STAND-HANGERS-FRONT","price":517.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Bolt-On_Semi-Trailer_Ramp_Stand_Storage_Brackets_STAND-HANGERS-FRONT.jpg?v=1785794007"},{"product_id":"hd-ramps-aluminum-skid-seat-attaching-bracket-for-pin-end-ramps-97","title":"HD Ramps Aluminum Skid Seat Bracket for Pin-End Ramps | 24 in, 36 in, 48 in, 97 in Lengths","description":"\u003ch4\u003eHD Ramps Aluminum Skid Seat Bracket for Pin-End Ramps | 24 in, 36 in, 48 in, 97 in Lengths\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps aluminum skid seat bracket anchors pin-end loading ramps to a truck bed, dock, or trailer deck so ramps cannot slip or kick out while heavy equipment crosses them. Ramp tubes pin into the skid seat channel, which also makes setup and takedown fast and lets you switch between ramp sizes without changing the mounting.\u003c\/p\u003e\n\u003cp\u003eFour lengths are available. The 24 in bracket weighs 10 lbs and stands 2-1\/2 in tall; the 36 in weighs 16 lbs, the 48 in weighs 20 lbs, and the 97 in weighs 40 lbs, each 3 in tall. All four are 4 in wide. Choosing a bracket wider than your ramp spread lets you slide ramps in or out to match different vehicle track widths.\u003c\/p\u003e\n\u003cp\u003eAluminum construction resists corrosion on an exposed deck or dock face. Brackets must be bolted or welded to the loading surface before use. Sold individually. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePins ramp tubes into a fixed channel to prevent slippage\u003c\/li\u003e\n\u003cli\u003eFour lengths: 24 in, 36 in, 48 in, and 97 in\u003c\/li\u003e\n\u003cli\u003e4 in wide across all lengths\u003c\/li\u003e\n\u003cli\u003eWider bracket allows ramps to slide in or out for different track widths\u003c\/li\u003e\n\u003cli\u003eFast ramp setup, takedown, and size changes\u003c\/li\u003e\n\u003cli\u003eAluminum construction resists corrosion\u003c\/li\u003e\n\u003cli\u003eBolt-on or weld-on installation; sold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"24\"","offer_id":49025277001898,"sku":"HD-SKID-SEAT-A24","price":159.0,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":49025277034666,"sku":"HD-SKID-SEAT-A36","price":173.0,"currency_code":"USD","in_stock":true},{"title":"48\"","offer_id":49025277067434,"sku":"HD-SKID-SEAT-A48","price":266.0,"currency_code":"USD","in_stock":true},{"title":"97\"","offer_id":49025277100202,"sku":"HD-SKID-SEAT-A97","price":542.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Aluminum_Skid_Seat_Attaching_Bracket_SKID-SEAT-A24.jpg?v=1785794037"},{"product_id":"hd-ramps-bolt-on-dunnage-storage-bracket-step-deck","title":"HD Ramps Bolt-On Dunnage Storage Bracket for Step Deck Trailers | Aluminum | 28-1\/2 in L x 4 in W x 14-1\/4 in H","description":"\u003ch4\u003eHD Ramps Bolt-On Dunnage Storage Bracket for Step Deck Trailers | Aluminum | 28-1\/2 in L x 4 in W x 14-1\/4 in H\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps bolt-on dunnage storage bracket moves your ramps and dunnage off the trailer deck and under it, freeing bed space for paying freight. Each hanger holds two 5 in thick pin-end ramps plus five 4x4 dunnage pieces, keeping loading gear organized and out of the way on flatbed and step deck trailers.\u003c\/p\u003e\n\u003cp\u003eBrackets are built from aluminum, so they will not rust and stay light enough to handle during installation. Each bracket measures 28-1\/2 in L x 4 in W x 14-1\/4 in H and the set weighs 56 lbs. Installation is two bolts per bracket to the trailer underside. The design is lockable with a standard padlock (not included) to secure ramps and dunnage against theft in transit.\u003c\/p\u003e\n\u003cp\u003eDesigned for trailers without knee braces. Supplied as a set of two brackets, right and left. Mounting hardware and padlock are not included. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHolds two 5 in thick pin-end ramps plus five 4x4 dunnage pieces\u003c\/li\u003e\n\u003cli\u003eAluminum construction resists rust and corrosion\u003c\/li\u003e\n\u003cli\u003e28-1\/2 in L x 4 in W x 14-1\/4 in H per bracket\u003c\/li\u003e\n\u003cli\u003eTwo-bolt installation per bracket\u003c\/li\u003e\n\u003cli\u003eLockable design accepts a standard padlock\u003c\/li\u003e\n\u003cli\u003eSupplied as a right and left set, 56 lbs total\u003c\/li\u003e\n\u003cli\u003eFor step deck and flatbed trailers without knee braces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311707818,"sku":"HD-RHD-5-28-DUN","price":656.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Bolt-On_Step_Deck_Loading_Ramp_Dunnage_Storage_Bracket_RHD-5-28-DUN_dunnage_storage_bracket.jpg?v=1785794041"},{"product_id":"hd-ramps-loading-ramp-storage-brackets-for-step-deck-trailers-without-knee-braces-22-1-2x4-1-4x15-3-4","title":"HD Ramps Step Deck Storage Bracket Set for Trailers without Knee Braces | Aluminum | 22-1\/2 in L x 4-1\/4 in W x 15-3\/4 in H","description":"\u003ch4\u003eHD Ramps Step Deck Storage Bracket Set for Trailers without Knee Braces | Aluminum | 22-1\/2 in L x 4-1\/4 in W x 15-3\/4 in H\u003c\/h4\u003e\n\u003cp\u003eThis HD Ramps step deck storage bracket set mounts under trailers that have no knee braces, where standard ramp hangers will not fit. The pair holds two HD Ramps aluminum load leveler ramps of 5 in height or less below the deck, keeping the bed clear for freight.\u003c\/p\u003e\n\u003cp\u003eBrackets are high-strength aluminum, each measuring 22-1\/2 in L x 4-1\/4 in W x 15-3\/4 in H, with the set weighing 30 lbs. A lockable pin system keeps ramps secured in transit and deters theft when parked; padlock is not included.\u003c\/p\u003e\n\u003cp\u003eBolt-on installation under the step deck gives quick access to ramps at the loading point. Supplied as a set of two brackets. Mounting hardware is not included. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFits step deck trailers without knee braces\u003c\/li\u003e\n\u003cli\u003eHolds two aluminum load leveler ramps 5 in high or less\u003c\/li\u003e\n\u003cli\u003eLockable pin system for transit security\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum, 30 lbs per set\u003c\/li\u003e\n\u003cli\u003e22-1\/2 in L x 4-1\/4 in W x 15-3\/4 in H per bracket\u003c\/li\u003e\n\u003cli\u003eBolt-on installation under the deck\u003c\/li\u003e\n\u003cli\u003ePadlock and mounting hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311740586,"sku":"HD-RHD-5-22","price":432.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Loading_Ramp_Storage_Brackets_for_Step_Deck_Trailers_without_Knee_Braces_RHD-5-22_ramp_storage_bracket.jpg?v=1785794046"},{"product_id":"hd-ramps-bolt-on-ramp-storage-brackets-6-in-thick-ramps","title":"HD Ramps Bolt-On Ramp Storage Brackets for 6 in Thick Ramps | Aluminum | Fits 16 in Wide Ramps","description":"\u003ch4\u003eHD Ramps Bolt-On Ramp Storage Brackets for 6 in Thick Ramps | Aluminum | Fits 16 in Wide Ramps\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps ramp storage brackets hang loading ramps below the trailer deck so a flatbed or step deck bed stays clear for larger payloads. The pair is sized for two 6 in thick ramps up to 16 in wide, held on UHMW plastic slides that let ramps move in and out of the brackets without binding.\u003c\/p\u003e\n\u003cp\u003eBrackets are high-strength aluminum and each measures 28-1\/2 in L x 15-3\/4 in W x 5 in H, with the set weighing 35 lbs. The lockable design keeps ramps seated during travel and deters theft when the trailer is parked; padlock is not included.\u003c\/p\u003e\n\u003cp\u003eBolt-on installation mounts the brackets under a step deck or flatbed trailer. Mounting hardware is not included. Supplied as a set of two brackets. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHolds two 6 in thick ramps up to 16 in wide\u003c\/li\u003e\n\u003cli\u003eUHMW plastic slides for smooth ramp loading and removal\u003c\/li\u003e\n\u003cli\u003eLockable design keeps ramps seated in transit\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum, 35 lbs per set\u003c\/li\u003e\n\u003cli\u003e28-1\/2 in L x 15-3\/4 in W x 5 in H per bracket\u003c\/li\u003e\n\u003cli\u003eBolt-on mounting under a step deck or flatbed trailer\u003c\/li\u003e\n\u003cli\u003ePadlock and mounting hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311806122,"sku":"HD-RAMP-HANGER-DBL-6","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Bolt-On_Semi-Trailer_Loading_Ramp_Storage_Brackets_for_6_Ramps_RAMP-HANGER-DBL-6_attached_on_the_trailer_underbody.jpg?v=1785794057"},{"product_id":"hd-ramps-bolt-on-trailer-ramp-holder-5-in-thick-ramps","title":"HD Ramps Bolt-On Trailer Ramp Holder for 5 in Thick Ramps | Aluminum | Fits 18 in and 20 in Wide Ramps","description":"\u003ch4\u003eHD Ramps Bolt-On Trailer Ramp Holder for 5 in Thick Ramps | Aluminum | Fits 18 in and 20 in Wide Ramps\u003c\/h4\u003e\n\u003cp\u003eThis HD Ramps trailer ramp holder stores two 5 in thick loading ramps under the trailer deck, clearing the flatbed or step deck bed for freight. The pair is sized for ramps 18 in or 20 in wide and carries them on UHMW plastic slides so ramps slide in and out cleanly at the loading point.\u003c\/p\u003e\n\u003cp\u003eBrackets are high-strength aluminum, each 28-1\/2 in L x 15-3\/4 in W x 5 in H, with the set weighing 35 lbs. A lockable design keeps ramps seated during travel and deters theft when the trailer is parked; padlock is not included.\u003c\/p\u003e\n\u003cp\u003eBolt-on mounting to the trailer underside. Mounting hardware is not included. Supplied as a set of two brackets. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHolds two 5 in thick ramps, 18 in or 20 in wide\u003c\/li\u003e\n\u003cli\u003eUHMW plastic slides for smooth loading and removal\u003c\/li\u003e\n\u003cli\u003eLockable design keeps ramps seated in transit\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum, 35 lbs per set\u003c\/li\u003e\n\u003cli\u003e28-1\/2 in L x 15-3\/4 in W x 5 in H per bracket\u003c\/li\u003e\n\u003cli\u003eBolt-on mounting under the trailer deck\u003c\/li\u003e\n\u003cli\u003ePadlock and mounting hardware not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311838890,"sku":"HD-RAMP-HANGER-DBL-5","price":416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Bolt-On_Semi-Trailer_Loading_Ramp_Storage_Brackets_for_5_RAMP-HANGER-DBL-5_double_ramp_hangers.jpg?v=1785794060"},{"product_id":"hd-ramps-heavy-duty-loading-ramp-dolly-for-ramps-up-to-20-wide-220-lbs-capacity","title":"HD Ramps Heavy-Duty Loading Ramp Dolly | Aluminum | Fits Ramps up to 20 in Wide | 220 lbs Capacity","description":"\u003ch4\u003eHD Ramps Heavy-Duty Loading Ramp Dolly | Aluminum | Fits Ramps up to 20 in Wide | 220 lbs Capacity\u003c\/h4\u003e\n\u003cp\u003eThis HD Ramps loading ramp dolly lets one person move and position heavy ramps that would otherwise take two. It fits heavy-duty ramps up to 20 in wide, including hook-end, flat-plate, and pin-style ramps and ramp systems, and carries up to 220 lbs.\u003c\/p\u003e\n\u003cp\u003eConstruction is aluminum with an aluminum axle and solid rubber tires, so the dolly rolls over uneven yard and dock surfaces without going flat. At 19 lbs it is light enough to stow in a side box or under the deck between loads. Overall dimensions are 9-3\/4 in L x 27 in W x 9-3\/4 in H.\u003c\/p\u003e\n\u003cp\u003eSetup takes no tools: the tires lock onto the bar with the included hairpin cotters. Sold individually. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e220 lbs load capacity\u003c\/li\u003e\n\u003cli\u003eFits heavy-duty ramps up to 20 in wide\u003c\/li\u003e\n\u003cli\u003eWorks with hook-end, flat-plate, and pin-style ramps\u003c\/li\u003e\n\u003cli\u003eAluminum axle with solid rubber tires\u003c\/li\u003e\n\u003cli\u003e19 lbs total weight for easy stowing\u003c\/li\u003e\n\u003cli\u003eTool-free assembly with included hairpin cotters\u003c\/li\u003e\n\u003cli\u003e9-3\/4 in L x 27 in W x 9-3\/4 in H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311904426,"sku":"HD-RAMP-DOLLY-22","price":234.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Heavy-Duty_Loading_Ramp_Dolly_for_Ramps_up_to_20_Wide_RAMP-DOLLY-22_being_placed_on_a_ramp.jpg?v=1785794065"},{"product_id":"hd-ramps-dunnage-rack-for-24-high-step-deck-aluminum-1-000-lbs-capacity","title":"HD Ramps Aluminum Trailer Dunnage Rack | 102 in L x 24 in W | 11 in and 24 in Heights | 1,000 lbs Capacity","description":"\u003ch4\u003eHD Ramps Aluminum Trailer Dunnage Rack | 102 in L x 24 in W | 11 in and 24 in Heights | 1,000 lbs Capacity\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps trailer dunnage rack mounts beneath a flatbed or step deck trailer and takes dunnage, tarps, straps, and tie-downs off the deck, so the bed carries freight instead of gear. Each rack holds 1,000 lbs and stores up to ten 8 ft 4x4s loose in the rack, or up to sixteen with tie-downs.\u003c\/p\u003e\n\u003cp\u003eRacks are 102 in long and 24 in wide in both heights. The 11 in rack weighs 124 lbs and the 24 in rack weighs 137 lbs — choose the height that clears your under-deck space. Construction is aluminum, which holds up to road spray and de-icer better than steel at lower weight. Drain holes in the base shed water and debris rather than collecting it.\u003c\/p\u003e\n\u003cp\u003eThe rack detaches from its hangers when not needed, so you can drop the tare weight on a heavy load. Lockable with a standard padlock, not included. Hangers mount directly to the trailer frame. Sold individually. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1,000 lbs capacity per rack\u003c\/li\u003e\n\u003cli\u003eHolds up to ten 8 ft 4x4s, or sixteen with tie-downs\u003c\/li\u003e\n\u003cli\u003e102 in L x 24 in W, in 11 in or 24 in heights\u003c\/li\u003e\n\u003cli\u003eAluminum construction resists corrosion\u003c\/li\u003e\n\u003cli\u003eRemovable from hangers to cut tare weight\u003c\/li\u003e\n\u003cli\u003eDrain holes prevent water and debris buildup\u003c\/li\u003e\n\u003cli\u003eLockable with a standard padlock, not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"11\"","offer_id":49025277296810,"sku":"HD-DR-102-24-11","price":1384.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025277329578,"sku":"HD-DR-102-24-24","price":1391.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Dunnage_Rack_for_11_High_Step_Deck_DR-102-24-11.jpg?v=1785794079"},{"product_id":"hd-ramps-8-x-18-aluminum-ramps-with-double-pin-on-ends-23-500-lbs-capacity","title":"HD Ramps Double Pin-On Trailer Ramps | 8 ft Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Double Pin-On Trailer Ramps | 8 ft Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps double pin on trailer ramps are 8 ft aluminum ramps with pin-on ends at both the attaching end and the foot, built for loading tractors, loaders, trucks, and heavy equipment onto step deck trailers, flatbeds, and loading docks. Pinning at both ends removes the kickout risk that comes with a ramp resting loose against a deck edge.\u003c\/p\u003e\n\u003cp\u003eThe same ramps are the building block of the HD Ramps load leveler kits, so they can be loaded from the front, the back, or the top step, and they turn on their side into load leveler stakes when it is time to haul rather than load. A reinforced stubbed toe keeps the lower end from bending under concentrated loads, which is what lets a pair serve either as sections of a modular system or as standalone 8 ft rear ramps.\u003c\/p\u003e\n\u003cp\u003eThree widths are available. The 16 in ramp sits on a 6 in tube, weighs 74 lb per ramp, and is rated at 20,000 lb per axle. The 18 in ramp sits on a 5 in tube, weighs 92 lb, and is rated at 23,500 lb per axle. The 20 in ramp also uses a 5 in tube, weighs 94 lb, and is rated at 23,500 lb per axle. All three are 8 ft long with a rung walking surface.\u003c\/p\u003e\n\u003cp\u003eAt under 100 lb per ramp, one person can set up a pair without equipment. Sold in pairs; each purchase is two ramps. Aluminum construction, made in the USA. Protected under US Patents 8347439 and 7930788.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity, and pin the ramps into their skid seat brackets before use. Skid seat brackets, chains, and load binders are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePin-on ends at both the attaching end and the foot eliminate ramp kickout\u003c\/li\u003e\n\u003cli\u003eThree widths: 16 in at 20,000 lb per axle, 18 in and 20 in at 23,500 lb per axle\u003c\/li\u003e\n\u003cli\u003e8 ft long, 74 lb to 94 lb per ramp, set up by one person\u003c\/li\u003e\n\u003cli\u003eRung walking surface\u003c\/li\u003e\n\u003cli\u003eReinforced stubbed toe allows use as modular sections or standalone 8 ft rear ramps\u003c\/li\u003e\n\u003cli\u003eLoad from the front, back, or top step\u003c\/li\u003e\n\u003cli\u003eSold in pairs, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276510378,"sku":"HD-20-16-096-02-02-LL","price":2048.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276543146,"sku":"HD-23-18-096-02-02-LL","price":2160.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276575914,"sku":"HD-23-20-096-02-02-LL","price":2369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_x16_Aluminum_Ramps_Double_Pin-On_Ends_with_20_000_lbs_Capacity_20-16-096-02-02-LL_attached_to_the_trailer.jpg?v=1785793798"},{"product_id":"hd-ramps-5-x-100-875-x-26-aluminum-load-leveler-bridge-for-step-deck-trailers","title":"HD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7\/8 in Span | 16-26 in Heights | 20,000 lb per Bridge","description":"\u003ch4\u003eHD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7\/8 in Span | 16-26 in Heights | 20,000 lb per Bridge\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps load leveler bridge is a single-piece aluminum bunk that spans the width of a step deck trailer and carries flatbed freight across the upper step drop. Where the convertible ramp kits ask you to lay ramps on their side, this is a purpose-built bridge that goes up in minutes and stays dedicated to leveling.\u003c\/p\u003e\n\u003cp\u003eThe bridge spans 100-7\/8 in and is 5 in thick, with adjustable offset stake pocket posts on each end. Pulling a pin and rotating the post gives 1\/2 in of overall width adjustment, so the bridge seats in stake pocket spacings from 97-1\/4 in to 97-3\/4 in. That covers most drop deck trailers, including Doonan, Featherlite, and Transcraft.\u003c\/p\u003e\n\u003cp\u003eSix heights are available to match your trailer's step drop: 16, 18, 20, 22, 24, and 26 in. Weight ranges from 53 lb at 16 in to 69 lb at 26 in, so one person can lift and set a bridge without help. Each bridge is rated at 20,000 lb over a 48 in span.\u003c\/p\u003e\n\u003cp\u003eWelded brackets on the top of the bridge are sized for a 4x4 timber, giving the load a wood bearing surface. Wood, chains, and load binders are sold separately, and the bridge must be chained and binder-secured before hauling. Aluminum construction, made in the USA. Sold individually; order the quantity of bridges your load requires.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e100-7\/8 in aluminum bridge spans the full trailer width in one piece\u003c\/li\u003e\n\u003cli\u003e20,000 lb capacity per bridge over a 48 in span\u003c\/li\u003e\n\u003cli\u003eSix heights from 16 in to 26 in for different step drops\u003c\/li\u003e\n\u003cli\u003eAdjustable offset stake pocket posts give 1\/2 in of width adjustment\u003c\/li\u003e\n\u003cli\u003eFits stake pocket spacings from 97-1\/4 in to 97-3\/4 in\u003c\/li\u003e\n\u003cli\u003eWelded brackets accept a 4x4 timber bearing surface\u003c\/li\u003e\n\u003cli\u003e53 lb to 69 lb, one-person setup, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276805290,"sku":"HD-20-04-101-16-LL","price":897.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276838058,"sku":"HD-20-04-101-18-LL","price":918.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276870826,"sku":"HD-20-04-101-20-LL","price":971.0,"currency_code":"USD","in_stock":true},{"title":"22\"","offer_id":49025276903594,"sku":"HD-20-04-101-22-LL","price":1030.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276936362,"sku":"HD-20-04-101-24-LL","price":1083.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276969130,"sku":"HD-20-04-101-26-LL","price":1132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/5_x_100.875_x_16_Aluminum_Load_Leveler_Bridge_for_Step_Deck_Trailers_20-04-101-16-LL.jpg?v=1785794137"},{"product_id":"hd-ramps-8-x-16-aluminum-ramps-with-pin-on-ends-10-000-lb-capacity","title":"HD Ramps Step Deck Loading Ramps | 8 ft x 16 in Aluminum | 18-26 in Load Height | 10,000 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Step Deck Loading Ramps | 8 ft x 16 in Aluminum | 18-26 in Load Height | 10,000 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps step deck loading ramps are 8 ft by 16 in aluminum ramps rated at 10,000 lb per axle, sized for loading cars, pickups, and wheeled equipment onto an upper deck. Pin-on ends lock the ramp to the trailer so it cannot kick out under a climbing load.\u003c\/p\u003e\n\u003cp\u003eEach ramp is 4-1\/4 in tall and weighs 59 lb, low enough to slide into storage brackets under the truck or trailer and light enough for one person to set. The working load height range is 18 in to 26 in, which covers most step deck upper decks and many loading docks.\u003c\/p\u003e\n\u003cp\u003eWide plate-style serrated cross bars run the length of the walking surface for traction in rain, mud, and snow. Aluminum construction resists rust and keeps the weight down without giving up capacity.\u003c\/p\u003e\n\u003cp\u003eSold in pairs; each purchase is two ramps. Made in the USA.\u003c\/p\u003e\n\u003cp\u003ePin the ramps into their skid seat brackets before use, and never exceed the rated axle capacity. Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Skid seat brackets are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity, 8 ft long by 16 in wide\u003c\/li\u003e\n\u003cli\u003eLoad height range of 18 in to 26 in\u003c\/li\u003e\n\u003cli\u003ePin-on ends prevent ramp kickout during loading\u003c\/li\u003e\n\u003cli\u003e59 lb per ramp, one-person setup\u003c\/li\u003e\n\u003cli\u003e4-1\/4 in profile slides into under-trailer storage brackets\u003c\/li\u003e\n\u003cli\u003ePlate-style serrated cross bars for wet and muddy conditions\u003c\/li\u003e\n\u003cli\u003eSold in pairs, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004312920234,"sku":"HD-10-16-096-02-02","price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_x_16_Aluminum_Ramps_with_Pin-On_Ends_10_000_lb._Capacity_10-16-096-02-02.jpg?v=1785794152"},{"product_id":"hd-ramps-hook-end-heavy-equipment-ramps-12x16-with-12-000-lbs-capacity","title":"HD Ramps Aluminum Equipment Loading Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 12 ft L x 16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Equipment Loading Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 12 ft L x 16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum equipment loading ramps carry 12,000 lb per axle and are sized for skid steers, compact track loaders on rubber wheels, trenchers, and utility tractors going onto standard-height equipment trailers. The hook attaching end grabs the trailer's angle iron or rub rail directly, and the stub foot spreads ground contact for stability on soft or uneven surfaces. Serrated rung surfaces hold traction in poor weather.\u003c\/p\u003e\n\u003cp\u003eEach ramp runs 12 ft long, 16 in wide, and 6-1\/4 in high, and weighs 102 lb. The 12 ft length paired with a 36 in to 42 in rise range gives a shallow enough approach for low-slung attachments and long wheelbases. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eCheck the axle weight of the machine being loaded against the per-axle rating before use. Sold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e12,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eHook end attaches to trailer angle iron or rub rail\u003c\/li\u003e\n\u003cli\u003eStub foot for stability on soft or uneven ground\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface for wet-weather traction\u003c\/li\u003e\n\u003cli\u003e12 ft L x 16 in W x 6-1\/4 in H per ramp\u003c\/li\u003e\n\u003cli\u003e102 lb per ramp\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004314591402,"sku":"HD-12-16-144-05-S","price":2775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Hook-End_Heavy_Equipment_Ramps_12_x16_with_12_000_lbs_Capacity_12-16-144-05-S_attached_to_the_trailer.jpg?v=1785794238"},{"product_id":"hd-ramps-6-x-14-hook-end-equipment-ramps-12-000-lb-per-axle-capacity","title":"HD Ramps Aluminum Skid Steer Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 6 ft L x 14 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Skid Steer Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 6 ft L x 14 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese skid steer ramps carry 12,000 lb per axle in a 6 ft length — short, heavy-rated ramps for low decks, drop-deck trailers, and dock-height loading where a 12 ft pair would be far too shallow to be useful. They are built for contractors, landscapers, farmers, and rental yards loading rubber-wheeled skid steers, compact track loaders, trenchers, and compact tractors day in and day out.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 6 ft long, 14 in wide, and 4 in high, and weighs 42 lb, so a single person can set the pair without help. The hook attaching end grabs the trailer's angle iron or rub rail with no hardware, and the stub foot spreads ground contact for stability. The rung loading surface provides traction. The pair covers rises from 12 in to 20 in. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e12,000 lb per axle capacity in a 6 ft length\u003c\/li\u003e\n\u003cli\u003eSized for low decks, drop-decks, and dock-height loading\u003c\/li\u003e\n\u003cli\u003eHook end attaches with no hardware\u003c\/li\u003e\n\u003cli\u003eStub foot for stability on soft ground\u003c\/li\u003e\n\u003cli\u003e6 ft L x 14 in W x 4 in H per ramp, 42 lb\u003c\/li\u003e\n\u003cli\u003eCovers 12 in to 20 in rises\u003c\/li\u003e\n\u003cli\u003eRung loading surface\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004314624170,"sku":"HD-12-14-072-05-S","price":1252.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/6_x_14_Hook-End_Equipment_Ramps_12-14-072-05-S.jpg?v=1785794244"},{"product_id":"hd-ramps-10-l-x-16-w-hook-end-heavy-equipment-ramps-10-000-lb-per-axle-capacity","title":"HD Ramps Aluminum Equipment Ramps | 10,000 lb per Axle | Hook End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Equipment Ramps | 10,000 lb per Axle | Hook End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum equipment ramps carry 10,000 lb per axle and are built for contractors, landscapers, farmers, and rental fleets loading rubber-wheeled machinery onto open trailers. The hook attaching end latches over the trailer's angle iron or rub rail so the ramp will not kick out under load, and the reinforced stub foot gives solid ground contact on gravel, dirt, and pavement. Extra-wide serrated rungs keep traction when the surface is wet.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 10 ft long, 16 in wide, and 4-1\/4 in high, and weighs 73 lb — light enough for one person to set and reposition. The pair covers trailer rises from 36 in to 42 in, which suits most tandem-axle equipment trailers and low decks. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSuited to skid steers, compact tractors, trenchers, and similar wheeled equipment. Sold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eHook end latches to trailer angle iron or rub rail\u003c\/li\u003e\n\u003cli\u003eReinforced stub foot for solid ground contact\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated rungs for wet-weather traction\u003c\/li\u003e\n\u003cli\u003e10 ft L x 16 in W x 4-1\/4 in H per ramp\u003c\/li\u003e\n\u003cli\u003e73 lb per ramp for one-person handling\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004314656938,"sku":"HD-10-16-120-05-S","price":2158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/10_L_x_16_W_Hook_End_Heavy_Equipment_Ramps_10-16-120-05-S_in_use_by_a_bulldozer.jpg?v=1785794249"},{"product_id":"hd-ramps-7-6-x-14-aluminum-ramps-pin-on-ends-10-000-lbs-per-axle","title":"HD Ramps Aluminum Equipment Trailer Ramps | 8,000-12,000 lb per Axle | Pin-On End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Equipment Trailer Ramps | 8,000-12,000 lb per Axle | Pin-On End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum equipment trailer ramps use pin-on ends that seat into skid seat brackets on the trailer, holding the ramps locked in place through the whole load. Three capacity and size combinations cover most rubber-wheeled equipment, from compact tractors and trenchers up to heavier loaders. Skid seat brackets are sold separately. Every version uses a serrated rung surface for traction in rain, snow, and mud.\u003c\/p\u003e\n\u003cp\u003eConfigurations, per ramp: 7 ft 6 in x 14 in rated 10,000 lb per axle, 47 lb, 4-1\/4 in high, covering 24 in to 36 in rises, with a stub foot for solid ground contact. 14 ft x 16 in rated 8,000 lb per axle, 96 lb, 4-1\/4 in high, covering 36 in to 42 in rises, with a knife foot. 14 ft x 16 in rated 12,000 lb per axle, 115 lb, 6-1\/4 in high, covering 36 in to 42 in rises, with a knife foot. Capacity is per axle; all other figures are per ramp.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCapacities from 8,000 lb to 12,000 lb per axle\u003c\/li\u003e\n\u003cli\u003ePin-on ends seat into skid seat brackets (sold separately)\u003c\/li\u003e\n\u003cli\u003eLengths of 7 ft 6 in and 14 ft\u003c\/li\u003e\n\u003cli\u003eRise coverage from 24 in to 42 in depending on configuration\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface on every version\u003c\/li\u003e\n\u003cli\u003e47 lb to 115 lb per ramp\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"7' 6\" \/ 10,000 lb per axle","offer_id":49025277853866,"sku":"HD-10-14-090-02-S","price":1364.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 12,000 lb per axle","offer_id":49025277886634,"sku":"HD-12-16-168-02","price":2989.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 8,000 lb per axle","offer_id":49025277919402,"sku":"HD-08-16-168-02","price":2273.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/7_6_x_14_Aluminum_Ramps_10-14-090-02-S.jpg?v=1785794254"},{"product_id":"hd-ramps-710-ez-traction-aluminum-plate-end-car-trailer-ramps-5-000-lb-capacity","title":"HD Ramps EZ Traction Auto Loading Ramps | 5,000 lb per Axle | Plate End, Punch Plate Surface | 7 ft 10 in - 10 ft L | Sold in Pairs","description":"\u003ch4\u003eHD Ramps EZ Traction Auto Loading Ramps | 5,000 lb per Axle | Plate End, Punch Plate Surface | 7 ft 10 in - 10 ft L | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese auto loading ramps carry 5,000 lb per axle and use the EZ Traction punch plate surface, a solid deck with punched openings that grips tires in rain, snow, and mud without the open gaps of a rung ramp. They suit car haulers, auto enthusiasts, restoration shops, and dealer and rental operations loading low-clearance and standard vehicles onto flat trailer decks. The full-width plate attaching end sits flat on the deck so the transition at the top of the ramp stays smooth.\u003c\/p\u003e\n\u003cp\u003eTwo sizes are available. The 7 ft 10 in x 15 in ramp weighs 40 lb per ramp, stands 3 in high, and covers rises from 16 in to 24 in. The 10 ft x 16 in ramp weighs 61 lb, stands 4-1\/2 in, and covers 20 in to 36 in; it adds a knife foot for a shallower ground angle. Dimensions, weights, and rise ranges are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eEZ Traction punch plate surface for all-weather grip\u003c\/li\u003e\n\u003cli\u003eFull-width plate attaching end for a flat deck transition\u003c\/li\u003e\n\u003cli\u003eTwo lengths: 7 ft 10 in and 10 ft\u003c\/li\u003e\n\u003cli\u003eCovers rises from 16 in to 36 in depending on size\u003c\/li\u003e\n\u003cli\u003e40 lb or 61 lb per ramp\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"7' 10\" x 15\"","offer_id":49025278279850,"sku":"HD-05-15-094-06-P","price":995.0,"currency_code":"USD","in_stock":true},{"title":"10' x 16\"","offer_id":49025278312618,"sku":"HD-05-16-120-06-P","price":1498.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/7_10_EZ_Traction_Aluminum_Plate_End_Car_Trailer_Ramps_5_000_lb._Capacity_05-15-094-06-P.jpg?v=1785794410"},{"product_id":"hd-ramps-stake-pocket-insert","title":"HD Ramps Stake Pocket Insert | Aluminum | Standard, Manac \u0026 Doonan Titanium","description":"\u003ch4\u003eHD Ramps Stake Pocket Insert | Aluminum | Standard, Manac \u0026amp; Doonan Titanium\u003c\/h4\u003e\n\u003cp\u003eThis stake pocket insert adapts a trailer's stake pockets to accept HD Ramps load leveler stakes. Three versions are available so the insert matches your trailer. The Standard insert fits most step deck trailer systems with a 3-1\/2 in by 1-1\/2 in pocket and accepts 3-3\/8 in by 1-5\/16 in stakes. The Manac, Trailmobile, and Dorsey insert fits those trailers' pockets and accepts 2-7\/8 in by 1-5\/16 in stakes. The Doonan insert fits Doonan Titanium CCRR trailers only and accepts 3-3\/8 in by 1 in stakes, with clearance for 3-1\/4 in by 1-5\/16 in. All three are made in the USA from high-strength, lightweight aluminum. Sold individually; order one per stake pocket you intend to use.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdapts trailer stake pockets to accept load leveler stakes\u003c\/li\u003e\n\u003cli\u003eThree fitments: Standard, Manac\/Trailmobile\/Dorsey, Doonan Titanium\u003c\/li\u003e\n\u003cli\u003eStandard and Manac inserts measure 8 in L x 3-9\/16 in W x 1-9\/16 in H\u003c\/li\u003e\n\u003cli\u003eHigh-strength, lightweight aluminum\u003c\/li\u003e\n\u003cli\u003eTrailer-specific fitment prevents stake movement under load\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Doonan Titanium","offer_id":49025277198506,"sku":"HD-LL-INSERT-DOONAN","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Manac \/ Trailmobile \/ Dorsey","offer_id":49025277231274,"sku":"HD-LL-INSERT-MANAC","price":53.0,"currency_code":"USD","in_stock":true},{"title":"Standard","offer_id":49025277264042,"sku":"HD-LL-INSERT-STND","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Single_Stake_Insert_for_Doonan_TitaniumTrailers_LL-INSERT-DOONAN.jpg?v=1785794545"},{"product_id":"hd-ramps-aluminum-semi-truck-wheel-riser-service-ramps-5-33-l-x-16-w-with-20-000-lbs-capacity","title":"HD Ramps Wheel Riser Ramps | Aluminum | 64 in L x 16 in W | 13-1\/4 in Lift | 20,000 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Wheel Riser Ramps | Aluminum | 64 in L x 16 in W | 13-1\/4 in Lift | 20,000 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eHD Ramps wheel riser ramps lift a semi tractor, motorhome, or Class A commercial vehicle to a stable working height for preventive maintenance and roadside service. Each ramp is 64 in long and 16 in wide and provides a 13-1\/4 in lift at 20,000 lb per axle — 40,000 lb GVW across the pair, enough for Class 8 tractors and loaded fleet vehicles.\u003c\/p\u003e\n\u003cp\u003eWood cribbing and stacked blocks shift under a drive tire and give no consistent lift height. These ramps replace both with a single fixed-geometry platform. An extra-wide cross-rung loading surface spreads the contact patch across the full tire width, and integrated wheel stops at the platform end prevent roll-through.\u003c\/p\u003e\n\u003cp\u003eAt 48 lb per ramp, they can be set out and picked up by one technician, which keeps them practical for mobile service calls rather than bolted-down shop use only. Aluminum construction resists rust and corrosion outdoors and through winter road salt.\u003c\/p\u003e\n\u003cp\u003eSuited to fleet maintenance facilities, independent truck shops, owner-operators, small buses, and shuttle vehicles. Sold in pairs. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20,000 lb per axle, 40,000 lb GVW per pair\u003c\/li\u003e\n\u003cli\u003e13-1\/4 in lift height\u003c\/li\u003e\n\u003cli\u003e64 in ramp length\u003c\/li\u003e\n\u003cli\u003eExtra-wide cross-rung loading surface\u003c\/li\u003e\n\u003cli\u003eIntegrated wheel stops on each ramp\u003c\/li\u003e\n\u003cli\u003e48 lb per ramp, aluminum\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004319178922,"sku":"HD-WR-20K","price":1578.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Aluminum_Semi_Truck_Wheel_Riser_Service_Ramps_WR-20K.jpg?v=1785794578"},{"product_id":"hd-ramps-heavy-duty-aluminum-truck-service-ramps-with-7-000-lbs-capacity-per-axle","title":"HD Ramps Truck Service Ramps | Aluminum | 63 in L x 16 in W | 10-1\/2 in Lift | 7,000 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Truck Service Ramps | Aluminum | 63 in L x 16 in W | 10-1\/2 in Lift | 7,000 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps truck service ramps raise a pickup, SUV, van, or camper to a working height that makes oil changes, brake work, and undercarriage inspection possible without a lift. Each ramp measures 63 in long by 16 in wide and delivers a 10-1\/2 in lift, rated at 7,000 lb per axle — 14,000 lb GVW across the pair.\u003c\/p\u003e\n\u003cp\u003eThe long 63 in run keeps the approach angle shallow, which matters on low front air dams and lowered suspensions where a short steel ramp would scrape before the tire ever climbs. Cross-bar plate rungs give the tire something to bite, and integrated wheel stops at the top of each ramp keep the vehicle from rolling past the platform.\u003c\/p\u003e\n\u003cp\u003eAluminum construction holds the load at 32 lb per ramp, so one person can carry, place, and stow them without a cart. Unlike plastic ramps, aluminum does not creep or deform under sustained load in hot weather, and unlike steel, it will not rust in an unheated shop or an open yard.\u003c\/p\u003e\n\u003cp\u003eSuited to home garages, independent service shops, DIY mechanics, and light commercial fleet vehicles. Sold in pairs. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e7,000 lb per axle, 14,000 lb GVW per pair\u003c\/li\u003e\n\u003cli\u003e10-1\/2 in lift height\u003c\/li\u003e\n\u003cli\u003e63 in ramp length for a shallow approach angle\u003c\/li\u003e\n\u003cli\u003eIntegrated wheel stops on each ramp\u003c\/li\u003e\n\u003cli\u003eCross-bar rung loading surface\u003c\/li\u003e\n\u003cli\u003e32 lb per ramp, aluminum\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004319211690,"sku":"HD-WR-7K","price":1343.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Heavy_Duty_Aluminum_Truck_Service_Ramps_WR-7K_with_truck.jpg?v=1785794583"},{"product_id":"hd-ramps-aluminum-modular-truck-trailer-ramp-system-20-l-x-20-w-with-5-000-lbs-capacity-per-axle","title":"HD Ramps Modular Aluminum Trailer Ramps | 5,000 lb per Axle | 20 ft L x 20 in W Assembled | Includes 2 Center Support Stands","description":"\u003ch4\u003eHD Ramps Modular Aluminum Trailer Ramps | 5,000 lb per Axle | 20 ft L x 20 in W Assembled | Includes 2 Center Support Stands\u003c\/h4\u003e\n\u003cp\u003eThese modular aluminum trailer ramps assemble into a 20 ft loading system rated at 5,000 lb per axle, built for auto transporters, dry van and semi-trailer operators, powersports haulers, and equipment rental yards loading into high decks. The system ships as four 10 ft ramp sections plus two height-adjustable center support stands, so the same components can be run short for a low trailer or joined full length for a dry van floor. Pin-on ends lock each section in place, and the design is reversible.\u003c\/p\u003e\n\u003cp\u003eAssembled, the system runs 20 ft long with 20 in wide runways. Each ramp section stands 3-1\/4 in high. Total system weight is 380 lb. Assembled, the system covers rises from 40 in to 54 in. Serrated rungs across the full width hold traction in all weather, and the knife foot ends give a gradual ground transition for low-clearance vehicles.\u003c\/p\u003e\n\u003cp\u003eSold as a complete system: four ramps and two center support stands. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eFour 10 ft ramp sections plus two center support stands\u003c\/li\u003e\n\u003cli\u003e20 ft L x 20 in W assembled, reversible modular layout\u003c\/li\u003e\n\u003cli\u003eHeight-adjustable center supports\u003c\/li\u003e\n\u003cli\u003eCovers assembled rises from 40 in to 54 in\u003c\/li\u003e\n\u003cli\u003ePin-on end connections with knife foot ground transition\u003c\/li\u003e\n\u003cli\u003e380 lb total system weight\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004319309994,"sku":"HD-05-20-240-02-06M-HIGH-REV1","price":5286.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Aluminum_Modular_Truck_Trailer_Ramp_System_05-20-240-02-06M-High-REV1_in_use.jpg?v=1785794594"},{"product_id":"hd-ramps-10-l-x-20-w-pin-on-end-heavy-equipment-ramps-20-000-lb-capacity","title":"HD Ramps Aluminum Pin-On Trailer Ramps | 20,000 lb per Axle | Pins on Both Ends, Stub Foot | 10 ft L x 20 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Pin-On Trailer Ramps | 20,000 lb per Axle | Pins on Both Ends, Stub Foot | 10 ft L x 20 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese pin-on trailer ramps carry 20,000 lb per axle — four times the capacity of a standard car-hauling pair — and are built for the heaviest wheeled machinery a tandem-axle trailer will take. Unlike single-end designs, these ramps pin at both ends, giving a fixed connection at the trailer and a positive anchor at the ground rather than relying on friction alone.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 10 ft long, 20 in wide, and 6 in high, and weighs 240 lb. The 20 in width gives generous tire tracking on wide-stance equipment, and the deeper 6 in section is what carries the rating. Stub feet provide solid ground contact on gravel, dirt, and pavement, and extra-wide serrated rungs hold traction in poor weather. The pair covers trailer rises from 36 in to 42 in. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eVerify the axle weight of the machine being loaded against the per-axle rating before use. Sold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003ePins on both ends for a positive connection at trailer and ground\u003c\/li\u003e\n\u003cli\u003eStub feet for solid ground contact\u003c\/li\u003e\n\u003cli\u003e20 in wide deck for wide-stance equipment\u003c\/li\u003e\n\u003cli\u003e10 ft L x 20 in W x 6 in H, 240 lb per ramp\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated rungs for traction\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004319342762,"sku":"HD-20-20-120-02-02","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/10_L_x_20_W_Pin-On_End_Heavy_Equipment_Ramps_20-20-120-02-02.jpg?v=1785794599"},{"product_id":"hd-ramps-2-bunk-load-leveler-4-ramp-master-kit-for-20-h-step-deck-trailers-23-500-lb-capacity-aluminum-ramps","title":"HD Ramps 2 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 18-20 in Step Deck Heights | 23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 18-20 in Step Deck Heights | 23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 2 bunk load leveler master kit is the complete package for a 102 in wide step deck trailer: four 8 ft aluminum ramp sections that assemble into a 16 ft run, two adjustable support stands, two load leveler bunks, and all the hanger hardware needed to store the whole system under the trailer.\u003c\/p\u003e\n\u003cp\u003eThe 16 ft run and adjustable stands let you set a shallower approach angle, which matters for long wheelbase equipment and low-clearance machines that would otherwise high-center at the top of a shorter ramp. When the load is on, two of the ramps turn on their side and drop into stakes seated in the trailer's stake pockets, forming two load leveler bunks that carry freight across the upper step.\u003c\/p\u003e\n\u003cp\u003eWhat separates the master kit from the 4 ramp system is storage hardware. The master kit adds four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets, so the ramps and stands hang beneath the trailer instead of taking up deck space.\u003c\/p\u003e\n\u003cp\u003eTwo configurations are available, matched to an 18 in or 20 in upper step drop, using 18 in or 20 in wide ramps on a 5 in tube. Both are rated at 23,500 lb per axle. Total kit weight is 705 lb at 18 in and 700 lb at 20 in.\u003c\/p\u003e\n\u003cp\u003eEvery kit includes four 8 ft ramps, two support stands, six lumber clips, four stake pocket supports, four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets. Bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one master kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft run for long wheelbase equipment\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eTwo of the ramps convert into load leveler bunks for hauling\u003c\/li\u003e\n\u003cli\u003eIncludes hanger and attaching brackets for under-trailer storage\u003c\/li\u003e\n\u003cli\u003eRated 23,500 lb per axle in both configurations\u003c\/li\u003e\n\u003cli\u003eConfigurations for 18 in and 20 in upper step drops\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 700 lb to 705 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"18\"","offer_id":49025276018858,"sku":"HD-23-18-192-02-02-MLL-2-KIT","price":8472.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276051626,"sku":"HD-23-20-192-02-02-MLL-2-KIT","price":8842.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-master-kit-ramp-and-load-leveler-combo-setup.jpg?v=1785794674"},{"product_id":"hd-ramps-4-bunk-load-leveler-4-ramp-master-kit-for-20-step-deck-trailers-23-500-lb-aluminum","title":"HD Ramps 4 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 4 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 4 bunk load leveler master kit is the largest step deck package in the line: four 8 ft aluminum ramp sections that assemble into a 16 ft run, two adjustable support stands, four load leveler bunks, and the full set of hanger hardware for under-trailer storage.\u003c\/p\u003e\n\u003cp\u003eFour bunks instead of two means every ramp in the kit converts, giving you four leveled support points across the upper step. That is the configuration to choose when you regularly haul long, heavy freight that needs support at more than two points, or when you want the flexibility to set bunk spacing to the load rather than the other way around.\u003c\/p\u003e\n\u003cp\u003eLoading works the same as the rest of the line. The pin-on ends seat in the trailer's stake pockets for a 16 ft ramp run, the stands adjust the approach angle, and the ramps then turn on their side into stakes to become the load leveler bunks.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus four load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 653 lb to 879 lb.\u003c\/p\u003e\n\u003cp\u003eEvery kit includes four 8 ft ramps, two support stands, 12 lumber clips, eight stake pocket supports, four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets. The 24 in and 26 in configurations add four load leveler spacers. Bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one master kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour load leveler bunks, double the support points of the 2 bunk kits\u003c\/li\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft run\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands plus full hanger hardware for under-trailer storage\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes 12 lumber clips and eight stake pocket supports\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 653 lb to 879 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276248234,"sku":"HD-20-16-192-02-02-MLL-4-KIT","price":8710.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276281002,"sku":"HD-23-18-192-02-02-MLL-4-KIT","price":9231.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276313770,"sku":"HD-23-20-192-02-02-MLL-4-KIT","price":9645.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276346538,"sku":"HD-23-24-192-02-02-MLL-4-KIT","price":10758.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276379306,"sku":"HD-23-26-192-02-02-MLL-4-KIT","price":11314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-ramp-leveler-setup.jpg?v=1785794680"},{"product_id":"hd-ramps-modular-step-deck-trailer-ramp-system-8-x-16-20-000-lb-aluminum","title":"HD Ramps Modular Step Deck Trailer Ramps | 16 ft Assembled Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps Modular Step Deck Trailer Ramps | 16 ft Assembled Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps step deck trailer ramps form a modular 16 ft loading system built for heavy equipment: four 8 ft aluminum ramp sections and two adjustable support stands, rated up to 23,500 lb per axle. This is the heavy-capacity counterpart to the 10,000 lb ramp kit, sized for tractors, loaders, and machinery rather than cars and pickups.\u003c\/p\u003e\n\u003cp\u003eThe system breaks down into sections one person can move, then assembles into a 16 ft run that reduces the approach angle enough for long, low equipment to clear. Two adjustable support stands, adjusting from 18 in to 24 in, hold the mid-span and keep the run from flexing under a moving load. Reinforced stubbed toes protect the lower ends, and extra-wide serrated cross bars hold traction in wet weather.\u003c\/p\u003e\n\u003cp\u003eThree widths are available. The 16 in system uses ramps on a 6 in tube, is rated at 20,000 lb per axle, and weighs 380 lb complete. The 18 in system uses a 5 in tube at 23,500 lb per axle and weighs 452 lb. The 20 in system also uses a 5 in tube at 23,500 lb per axle and weighs 460 lb.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramp sections and two support stands. Ramp sections attach with a pin-on end. Aluminum construction, made in the USA. Sold as a complete system; each purchase is one system.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Skid seat brackets, chains, and load binders are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft heavy equipment run\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in width, 23,500 lb per axle at 18 in and 20 in\u003c\/li\u003e\n\u003cli\u003eTwo support stands adjust from 18 in to 24 in to hold the mid-span\u003c\/li\u003e\n\u003cli\u003eBreaks into sections one person can handle\u003c\/li\u003e\n\u003cli\u003eReinforced stubbed toes resist bending at the lower ends\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated cross bars for traction in rain, mud, and snow\u003c\/li\u003e\n\u003cli\u003eComplete system weight 380 lb to 460 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276412074,"sku":"HD-20-16-192-02-02M","price":5554.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276444842,"sku":"HD-23-18-192-02-02M","price":5618.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276477610,"sku":"HD-23-20-192-02-02M","price":6146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/loading-military-truck-ramp-20-16-192-02-02m.jpg?v=1785794709"},{"product_id":"hd-ramps-aluminum-folding-smart-car-trailer-ramps-12-x-12-plate-end-design-2-000-lb-capacity","title":"HD Ramps Folding Smart Car Ramps | 2,000 lb per Axle | Plate End, Stub Foot | 12 ft L x 12 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Folding Smart Car Ramps | 2,000 lb per Axle | Plate End, Stub Foot | 12 ft L x 12 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese folding smart car ramps carry 2,000 lb per axle and fold in half for transport, which is the point of them: a 12 ft ramp that stores in the space a 6 ft one would take. They are built for Smart car owners, full-time RVers, and anyone loading a light vehicle onto a trailer or RV bed with limited storage room. The folded pair tucks under trailer frame rails or behind wheels.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 12 ft long, 12 in wide, and 2 in high, and weighs 56 lb. The 12 ft length across a 2 in deck height gives a very shallow approach — the pair covers rises from 4 in to 40 in, the widest rise range in this batch. Heavy-duty folding plate ends use removable stainless pins, and rubber pads under the plate ends resist slipping on the deck. The rung surface provides traction, and the stub foot gives solid ground contact. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eFolds in half for compact transport and storage\u003c\/li\u003e\n\u003cli\u003e12 ft L x 12 in W x 2 in H per ramp, 56 lb\u003c\/li\u003e\n\u003cli\u003eCovers rises from 4 in to 40 in\u003c\/li\u003e\n\u003cli\u003eFolding plate ends with removable stainless pins\u003c\/li\u003e\n\u003cli\u003eRubber pads under plate ends resist deck slippage\u003c\/li\u003e\n\u003cli\u003eStub foot for solid ground contact\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004320391338,"sku":"HD-02-12-144-06-S","price":1301.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-folding-smart-car-02-12-144-06-s.jpg?v=1785794720"},{"product_id":"hd-ramps-pin-on-end-heavy-equipment-ramps-10-x-16-aluminum-10-000-lb-per-axle","title":"HD Ramps Pin-On Equipment Ramps | 10,000 lb per Axle | Pin-On End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Pin-On Equipment Ramps | 10,000 lb per Axle | Pin-On End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese pin-on equipment ramps carry 10,000 lb per axle and seat into skid seat brackets on the trailer, which locks them against the deck so they cannot walk or kick out while a machine climbs. That fixed connection is the reason equipment haulers choose pin-on over hook-end for repeat loading of the same trailer. Skid seat brackets are sold separately.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 10 ft long, 16 in wide, and 4-1\/4 in high, and weighs 73 lb — light enough to set by hand despite the capacity. The reinforced stub foot spreads ground contact for stability on dirt and gravel, and extra-wide serrated rungs hold traction in rain, snow, and mud. The pair covers trailer rises from 36 in to 42 in, which suits standard tandem-axle equipment trailers. Suited to skid steers, compact tractors, trenchers, and similar rubber-wheeled machinery. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. \u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003ePin-on ends seat into skid seat brackets (sold separately)\u003c\/li\u003e\n\u003cli\u003eReinforced stub foot for stability on dirt and gravel\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated rungs for wet-weather traction\u003c\/li\u003e\n\u003cli\u003e10 ft L x 16 in W x 4-1\/4 in H per ramp\u003c\/li\u003e\n\u003cli\u003e73 lb per ramp\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004320424106,"sku":"HD-10-16-120-02-S","price":1944.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-bobcat-loading-10-16-120-02-s.jpg?v=1785794726"}],"url":"https:\/\/selectramps.com\/collections\/trailer-aluminum-ramps.oembed?page=3","provider":"Select Ramps","version":"1.0","type":"link"}