{"title":"Over 10,000 lb","description":null,"products":[{"product_id":"five-star-aluminum-arch-loading-ramp-pair","title":"Five Star Aluminum Arch Loading Ramp Pair | Up to 10,000 lb Capacity","description":"\u003ch4\u003eFive Star Aluminum Arch Loading Ramp Pair | Up to 10,000 lb Capacity\u003c\/h4\u003e\n\u003cp\u003eA pair of arched aluminum loading ramps—one ramp under each side of your equipment—built to handle the broadest range of loading jobs. The arch is what sets these apart: it reduces the angle where the ramp meets your truck bed or trailer, so low-slung equipment transitions onto the deck without the belly scraping and high-centering that flat ramps invite.\u003c\/p\u003e\n\u003cp\u003eThat makes arch ramps the right call for anything that sits low between the axles—golf carts, race cars, zero-turn mowers, skid steers, garden tractors, tool cabinets, and similar rolling stock. Arch height runs 2 to 4 inches depending on length. On the 7-foot and longer models the arch sits near the top of the ramp, right where the transition happens; the 5-foot and 6-foot models are arched their full length.\u003c\/p\u003e\n\u003cp\u003eEach ramp is made from tempered, aircraft-grade aluminum—light enough to position and set up by hand, and resistant to the rust and corrosion that wear down steel ramps in wet and outdoor conditions. They're MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose arch over straight\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eArched profile reduces entry angle and helps prevent belly scraping\u003c\/li\u003e\n\u003cli\u003eBest choice for low-clearance equipment that sits low between the axles\u003c\/li\u003e\n\u003cli\u003eSold as a pair—each ramp supports one side of the load\u003c\/li\u003e\n\u003cli\u003eCapacities up to 10,000 lb per pair (distributed)\u003c\/li\u003e\n\u003cli\u003eAvailable in 12 in, 16 in, and 24 in widths\u003c\/li\u003e\n\u003cli\u003eLightweight tempered aluminum; rust- and corrosion-resistant. Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eAvailable in lengths from 5 ft to 10 ft, in 12-, 16-, and 24-inch widths, with capacities up to 10,000 lb per pair. A longer ramp creates a lower, safer loading angle—helpful for taller tailgates, trailer decks, and lower-clearance equipment. The full width of each tire or track should fit within the ramp; Five Star recommends 16-inch ramps for lengths over 7 ft, while the 24-inch width suits wider tires, tracks, and dual wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout load ratings:\u003c\/strong\u003e the capacity shown is for the pair. A pair rated 3,000 lb is two ramps at 1,500 lb each. Always choose a rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"5' \/ 12\" \/ 2500","offer_id":48372309917866,"sku":"FSM-512","price":360.96,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 5000","offer_id":48372309950634,"sku":"FSM-512H5","price":440.32,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 10000","offer_id":48372309983402,"sku":"FSM-512H10","price":574.72,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 2500","offer_id":48372310016170,"sku":"FSM-516","price":433.92,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 5000","offer_id":48372310048938,"sku":"FSM-516H5","price":522.24,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 10000","offer_id":48372310081706,"sku":"FSM-516H10","price":614.4,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 2000","offer_id":48372310114474,"sku":"FSM-612H2","price":430.08,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 3000","offer_id":48372310147242,"sku":"FSM-612H3","price":632.32,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 5000","offer_id":48372310180010,"sku":"FSM-612H5","price":709.12,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 10000","offer_id":48372310212778,"sku":"FSM-612H10","price":779.52,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 1000","offer_id":48372310245546,"sku":"FSM-616","price":522.24,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 3000","offer_id":48372310278314,"sku":"FSM-616H3","price":715.52,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 5000","offer_id":48372310311082,"sku":"FSM-616H5","price":764.16,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 10000","offer_id":48372310343850,"sku":"FSM-616H10","price":915.2,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 24\" \/ 1000","offer_id":48372310376618,"sku":"FSM-624","price":736.0,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 1500","offer_id":48372310409386,"sku":"FSM-712","price":454.4,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 3000","offer_id":48372310442154,"sku":"FSM-712H3","price":779.52,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 6000","offer_id":48372310474922,"sku":"FSM-712H6","price":1004.8,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 1500","offer_id":48372310507690,"sku":"FSM-716","price":628.48,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 3000","offer_id":48372310540458,"sku":"FSM-716H3","price":907.52,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 6000","offer_id":48372310573226,"sku":"FSM-716H6","price":1021.44,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 24\" \/ 1500","offer_id":48372310605994,"sku":"FSM-724","price":812.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 1500","offer_id":48372310638762,"sku":"FSM-812","price":549.12,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 3000","offer_id":48372310671530,"sku":"FSM-812H3","price":780.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 6000","offer_id":48372310704298,"sku":"FSM-812H6","price":995.84,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 1500","offer_id":48372310737066,"sku":"FSM-816","price":659.2,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 3000","offer_id":48372310769834,"sku":"FSM-816H3","price":940.8,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 1500","offer_id":48372310802602,"sku":"FSM-912","price":688.64,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 3000","offer_id":48372310835370,"sku":"FSM-912H3","price":998.4,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 6000","offer_id":48372310868138,"sku":"FSM-912H6","price":1089.28,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 1500","offer_id":48372310900906,"sku":"FSM-916","price":733.44,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 3000","offer_id":48372310933674,"sku":"FSM-916H3","price":1024.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 1500","offer_id":48372310966442,"sku":"FSM-1012","price":825.6,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 3000","offer_id":48372310999210,"sku":"FSM-1012H3","price":1056.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 6000","offer_id":48372311031978,"sku":"FSM-1012H6","price":1393.92,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 1500","offer_id":48372311064746,"sku":"FSM-1016","price":907.52,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 3000","offer_id":48372311097514,"sku":"FSM-1016H3","price":1103.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Arch_Ramp_Pair_1.jpg?v=1780530025"},{"product_id":"five-star-aluminum-straight-loading-ramp-pair","title":"Five Star Aluminum Straight Loading Ramp Pair | Up to 10,000 lb Capacity","description":"\u003ch4\u003eFive Star Aluminum Straight Loading Ramp Pair | Up to 10,000 lb Capacity\u003c\/h4\u003e\n\u003cp\u003eA pair of straight aluminum loading ramps—one under each side of your equipment—with the same build and load ratings as Five Star's arch ramps, minus the arch. Dropping the arch lowers the overall height, and that's the whole point: straight ramps slide into tighter spaces for storage, tuck under equipment, and stow as slide-outs where an arched ramp won't fit.\u003c\/p\u003e\n\u003cp\u003eIf clearance isn't your concern but storage space is, this is the profile to reach for. You still get the full loading capability—up to 10,000 lb per pair, three standard widths, and the same optional end supports and surfacing as the rest of the Five Star lineup—so you can load just about anything that rolls and then put the ramps away flat.\u003c\/p\u003e\n\u003cp\u003eEach ramp is made from tempered, aircraft-grade aluminum—light to handle and set up, and resistant to the rust and corrosion that wear down steel ramps in wet and outdoor conditions. They're MIG welded in fixtures by Five Star Manufacturing's certified welders in Crane, Missouri, where the company has built aluminum ramps in the USA since 1984.\u003c\/p\u003e\n\u003ch4\u003eWhy choose straight over arch\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLower overall height—slides into tighter spaces for storage\u003c\/li\u003e\n\u003cli\u003eStows easily as a slide-out or tucked under equipment\u003c\/li\u003e\n\u003cli\u003eSame load ratings and widths as the arch versions\u003c\/li\u003e\n\u003cli\u003eSold as a pair—each ramp supports one side of the load\u003c\/li\u003e\n\u003cli\u003eCapacities up to 10,000 lb per pair (distributed)\u003c\/li\u003e\n\u003cli\u003eAvailable in 12 in, 16 in, and 24 in widths\u003c\/li\u003e\n\u003cli\u003eLightweight tempered aluminum; rust- and corrosion-resistant. Made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoosing the right size\u003c\/h4\u003e\n\u003cp\u003eAvailable in lengths from 5 ft to 10 ft, in 12-, 16-, and 24-inch widths, with capacities up to 10,000 lb per pair. A longer ramp creates a lower, safer loading angle—helpful for taller tailgates and trailer decks. The full width of each tire or track should fit within the ramp; Five Star recommends 16-inch ramps for lengths over 7 ft, while the 24-inch width suits wider tires, tracks, and dual wheels. If your equipment sits low between the axles and high-centering is a risk, consider the arch version instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout load ratings:\u003c\/strong\u003e the capacity shown is for the pair. A pair rated 3,000 lb is two ramps at 1,500 lb each. Always choose a rating higher than the full (wet) weight of your equipment, including attachments, cargo, and operator.\u003c\/p\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003e1-Year Limited Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by Five Star Manufacturing's 1-year limited warranty against defects in materials and workmanship. If a defect is confirmed, Five Star will—at its discretion—repair the product, replace it, or refund the original product value.\u003c\/p\u003e\n\u003cp\u003eTo support a claim, please hold on to the product, its packaging, and any paperwork until the claim has been reviewed and a resolution determined; Five Star may request the affected product for inspection. These ramps are built in the USA by a crew that takes real pride in their work, and the warranty reflects that confidence. Please contact Select Ramps at sales@selectramps.com to start the process.\u003c\/p\u003e","brand":"Five Star Manufacturing","offers":[{"title":"5' \/ 12\" \/ 2500","offer_id":48372311195818,"sku":"FSM-512S","price":360.96,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 5000","offer_id":48372311228586,"sku":"FSM-512SH5","price":440.32,"currency_code":"USD","in_stock":true},{"title":"5' \/ 12\" \/ 10000","offer_id":48372311261354,"sku":"FSM-512SH10","price":574.72,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 2500","offer_id":48372311294122,"sku":"FSM-516S","price":433.92,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 5000","offer_id":48372311326890,"sku":"FSM-516SH5","price":509.44,"currency_code":"USD","in_stock":true},{"title":"5' \/ 16\" \/ 10000","offer_id":48372311359658,"sku":"FSM-516SH10","price":601.6,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 2000","offer_id":48372311392426,"sku":"FSM-612SH2","price":430.08,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 3000","offer_id":48372311425194,"sku":"FSM-612SH3","price":625.92,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 5000","offer_id":48372311457962,"sku":"FSM-612SH5","price":702.72,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 12\" \/ 10000","offer_id":48372311490730,"sku":"FSM-612SH10","price":766.72,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 1000","offer_id":48372311523498,"sku":"FSM-616S","price":522.24,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 3000","offer_id":48372311556266,"sku":"FSM-616SH3","price":709.12,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 5000","offer_id":48372311589034,"sku":"FSM-616SH5","price":757.76,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 16\" \/ 10000","offer_id":48372311621802,"sku":"FSM-616SH10","price":902.4,"currency_code":"USD","in_stock":true},{"title":"6'4\" \/ 24\" \/ 1500","offer_id":48372311654570,"sku":"FSM-624S","price":736.0,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 1500","offer_id":48372311687338,"sku":"FSM-712S","price":467.2,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 3000","offer_id":48372311720106,"sku":"FSM-712SH3","price":702.72,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 12\" \/ 6000","offer_id":48372311752874,"sku":"FSM-712SH6","price":992.0,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 1500","offer_id":48372311785642,"sku":"FSM-716S","price":628.48,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 3000","offer_id":48372311818410,"sku":"FSM-716SH3","price":907.52,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 16\" \/ 6000","offer_id":48372311851178,"sku":"FSM-716SH6","price":1021.44,"currency_code":"USD","in_stock":true},{"title":"7'4\" \/ 24\" \/ 1500","offer_id":48372311883946,"sku":"FSM-724S","price":812.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 1500","offer_id":48372311916714,"sku":"FSM-812S","price":549.12,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 3000","offer_id":48372311949482,"sku":"FSM-812SH3","price":780.8,"currency_code":"USD","in_stock":true},{"title":"8' \/ 12\" \/ 6000","offer_id":48372311982250,"sku":"FSM-812SH6","price":995.84,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 1500","offer_id":48372312015018,"sku":"FSM-816S","price":659.2,"currency_code":"USD","in_stock":true},{"title":"8' \/ 16\" \/ 3000","offer_id":48372312047786,"sku":"FSM-816SH3","price":940.8,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 1500","offer_id":48372312080554,"sku":"FSM-912S","price":688.64,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 3000","offer_id":48372312113322,"sku":"FSM-912SH3","price":998.4,"currency_code":"USD","in_stock":true},{"title":"9' \/ 12\" \/ 6000","offer_id":48372312146090,"sku":"FSM-912SH6","price":1089.28,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 1500","offer_id":48372312178858,"sku":"FSM-916S","price":733.44,"currency_code":"USD","in_stock":true},{"title":"9' \/ 16\" \/ 3000","offer_id":48372312211626,"sku":"FSM-916SH3","price":1024.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 1500","offer_id":48372312244394,"sku":"FSM-1012S","price":825.6,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 3000","offer_id":48372312277162,"sku":"FSM-1012SH3","price":1056.0,"currency_code":"USD","in_stock":true},{"title":"10' \/ 12\" \/ 6000","offer_id":48372312309930,"sku":"FSM-1012SH6","price":1393.92,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 1500","offer_id":48372312342698,"sku":"FSM-1016S","price":907.52,"currency_code":"USD","in_stock":true},{"title":"10' \/ 16\" \/ 3000","offer_id":48372312375466,"sku":"FSM-1016SH3","price":1103.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Select_Ramps_FSM_Straight_Ramp_Pair_1.jpg?v=1780530885"},{"product_id":"hd-ramps-aluminum-hook-end-ramps-14x16-with-12-000-lbs-capacity","title":"HD Ramps Aluminum Heavy Equipment Ramps | 7,000-12,000 lb per Axle | Hook End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Heavy Equipment Ramps | 7,000-12,000 lb per Axle | Hook End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum heavy equipment ramps use a hook attaching end that drops over the trailer's angle iron or rub rail — no brackets, no hardware, no bolt-up — and come in four capacity and size combinations from 7,000 lb to 12,000 lb per axle. That range covers everything from loading a car or light equipment onto a utility trailer up to putting a loaded skid steer on a tandem-axle deck. Every version uses a serrated rung surface for traction in rain, snow, and mud.\u003c\/p\u003e\n\u003cp\u003eConfigurations, per ramp: 7 ft 6 in x 15 in rated 7,000 lb per axle, 36 lb, 3-1\/4 in high, covering 20 in to 24 in rises, knife foot. 7 ft 6 in x 14 in rated 10,000 lb per axle, 47 lb, 4-1\/4 in high, covering 24 in to 36 in rises, stub foot. 14 ft x 16 in rated 8,000 lb per axle, 96 lb, 4-1\/4 in high, covering 36 in to 42 in rises, knife foot. 14 ft x 16 in rated 12,000 lb per axle, 115 lb, 6-1\/4 in high, covering 36 in to 42 in rises, knife foot. Capacity is per axle; all other figures are per ramp.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCapacities from 7,000 lb to 12,000 lb per axle\u003c\/li\u003e\n\u003cli\u003eHook end attaches with no brackets or hardware\u003c\/li\u003e\n\u003cli\u003eLengths of 7 ft 6 in and 14 ft\u003c\/li\u003e\n\u003cli\u003eRise coverage from 20 in to 42 in depending on configuration\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface on every version\u003c\/li\u003e\n\u003cli\u003e36 lb to 115 lb per ramp\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"7' 6\" \/ 10,000 lb per axle","offer_id":49025277952170,"sku":"HD-10-14-090-05-S","price":1268.0,"currency_code":"USD","in_stock":true},{"title":"7' 6\" \/ 7,000 lb per axle","offer_id":49025277984938,"sku":"HD-07-15-090-04","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 12,000 lb per axle","offer_id":49025278017706,"sku":"HD-12-16-168-05","price":2989.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 8,000 lb per axle","offer_id":49025278050474,"sku":"HD-08-16-168-05","price":2273.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/7_6_x_14_Aluminum_Ramps_Hook_Ends_hook_in_use_by_a_bulldozer.jpg?v=1785793841"},{"product_id":"hd-ramps-adjustable-heavy-duty-lower-ramp-support-stands-18-24-23-500-lbs-capacity","title":"HD Ramps Adjustable Heavy-Duty Ramp Jack Stand Set | Aluminum | 18-24 in Height | 23,500 lbs Per Axle","description":"\u003ch4\u003eHD Ramps Adjustable Heavy-Duty Ramp Jack Stand Set | Aluminum | 18-24 in Height | 23,500 lbs Per Axle\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps ramp jack stands give loading ramps a rated, adjustable base instead of stacked blocks or fixed-height supports that do not quite reach. Height adjusts from 18 in to 24 in with locking pin positions, and each stand carries 23,500 lbs per axle — enough for tractors, loaders, and other heavy construction equipment moving onto a step deck or flatbed.\u003c\/p\u003e\n\u003cp\u003eStands are high-strength aluminum with integrated pin-on attachment points that seat pin-end ramps securely. Each stand measures 25-1\/2 in L x 18 in W x 18 in H at minimum height and weighs 42 lbs, light enough to reposition by hand between loads.\u003c\/p\u003e\n\u003cp\u003eBuilt for heavy haulers, construction logistics, and step deck operators who need mid-point or lower-point stability during the transition onto the deck. Supplied as a set of two stands. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e23,500 lbs capacity per axle\u003c\/li\u003e\n\u003cli\u003eHeight adjusts 18-24 in with locking pin positions\u003c\/li\u003e\n\u003cli\u003eIntegrated pin-on attachment points for pin-end ramps\u003c\/li\u003e\n\u003cli\u003eHigh-strength aluminum, 42 lbs per stand\u003c\/li\u003e\n\u003cli\u003e25-1\/2 in L x 18 in W x 18 in H at minimum height\u003c\/li\u003e\n\u003cli\u003eSupplied as a set of two stands\u003c\/li\u003e\n\u003cli\u003eFor step deck, drop deck, and flatbed loading\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004310102186,"sku":"HD-STAND-10-16-18-24-H","price":1408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Adjustable_Heavy-Duty_Lower_Ramp_Support_Stands_STAND-10-16-18-24-H.jpg?v=1785793888"},{"product_id":"hd-ramps-16-l-x-20-w-4-bunk-load-leveler-4-ramp-system-for-20-h-step-deck-trailers-23-500-lb-capacity","title":"HD Ramps 4 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 4 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 4 bunk load leveler system gives a 102 in wide step deck trailer four load leveler bunks and a 16 ft ramp run, without the storage hardware of the master kit. If your ramps already have a hanger setup, or you store them on the deck, this is the configuration that skips what you do not need.\u003c\/p\u003e\n\u003cp\u003eFour 8 ft aluminum ramp sections assemble into a 16 ft run with two adjustable support stands controlling the approach angle. All four ramps convert to load leveler bunks: turn them on their side, drop them into stakes seated in the stake pockets, and you have four leveled support points across the upper step.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus four load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 508 lb to 700 lb, roughly 145 lb to 180 lb lighter than the equivalent master kit.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramps, two support stands, 12 lumber clips, and eight stake pocket supports. The 24 in and 26 in configurations add four load leveler spacers. Ramp hanger brackets, stand hanger brackets, attaching brackets, bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour load leveler bunks with a 16 ft assembled ramp run\u003c\/li\u003e\n\u003cli\u003eNo hanger hardware, for haulers who already store their ramps\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes 12 lumber clips and eight stake pocket supports\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 508 lb to 700 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276084394,"sku":"HD-20-16-192-02-02-MLL-4","price":6720.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276117162,"sku":"HD-23-18-192-02-02-MLL-4","price":7212.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276149930,"sku":"HD-23-20-192-02-02-MLL-4","price":7751.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276182698,"sku":"HD-23-24-192-02-02-MLL-4","price":8325.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276215466,"sku":"HD-23-26-192-02-02-MLL-4","price":8753.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/16_L_x_16_W_4_Bunk_Load_Leveler_4_Ramp_System_for_16_H_Step_Deck_Trailers_20-16-192-02-02-MLL-4_ramp_in_use_by_a_tractor.jpg?v=1785793926"},{"product_id":"hd-ramps-2-bunk-load-leveler-4-ramp-system-16x20-for-20-h-step-deck-trailers","title":"HD Ramps 2 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps step deck load leveler system pairs a 16 ft ramp run with two load leveler bunks, and is the most common configuration for haulers who need full-length loading and enough deck leveling for standard long freight. Four 8 ft aluminum ramp sections and two adjustable support stands handle loading; two of those ramps then convert to bunks for the haul.\u003c\/p\u003e\n\u003cp\u003eConversion takes minutes. Turn two ramps on their side, drop them into the adjustable stakes seated in the trailer's stake pockets, and the upper step is bridged with two leveled support points. The stakes fit all 102 in wide step deck trailers, 97 to 98 in measured inside the stake pockets, without modification.\u003c\/p\u003e\n\u003cp\u003eTwo bunks or four is the decision to make here. Two bunks cover most long freight and keep the kit lighter and cheaper. Four bunks, on the sibling 4 bunk system, add two more support points for loads that need them.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus two load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 452 lb to 580 lb.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramps, two support stands, six lumber clips, and four stake pocket supports. The 24 in and 26 in configurations add two load leveler spacers. Hanger hardware, bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e16 ft assembled ramp run with two load leveler bunks\u003c\/li\u003e\n\u003cli\u003eLightest of the four ramp kits at 452 lb to 580 lb\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eFits 102 in wide step deck trailers with no modification\u003c\/li\u003e\n\u003cli\u003eAluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025275691178,"sku":"HD-20-16-192-02-02-MLL-2","price":6175.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025275723946,"sku":"HD-23-18-192-02-02-MLL-2","price":6508.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025275756714,"sku":"HD-23-20-192-02-02-MLL-2","price":6978.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025275789482,"sku":"HD-23-24-192-02-02-MLL-2","price":7009.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025275822250,"sku":"HD-23-26-192-02-02-MLL-2","price":7480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/2_Bunk_Load_Leveler_4_Ramp_System_16_x16_for_16_H_Step_Deck_Trailers_23-18-192-02-02-MLL-2_bundled_products.jpg?v=1785793942"},{"product_id":"hd-ramps-2-bunk-load-leveler-2-ramp-system-8x20-for-26-h-step-deck-trailers","title":"HD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 2 bunk load leveler 2 ramp system is a dual-purpose kit for 102 in wide step deck trailers: a pair of 8 ft aluminum ramps for loading, and two load leveler bunks for hauling long freight across the step. Both jobs are handled by the same two ramps, so nothing extra rides along on the trailer.\u003c\/p\u003e\n\u003cp\u003eTo load, the pin-on ends slide into the trailer's stake pockets. To convert, the ramps are turned on their side and dropped into the adjustable stakes that seat in the same stake pockets, forming two level bunks that carry the load over the upper step drop. The stakes adjust to fit all 102 in wide step deck trailers, measuring 97 to 98 in from the inside of the stake pockets, with no trailer modification.\u003c\/p\u003e\n\u003cp\u003eChoose the configuration that matches your trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use ramps of matching width on a 5 in tube and are rated at 23,500 lb per axle. The 24 and 26 in configurations reach their height with 18 in and 20 in ramps plus two load leveler spacers, also rated at 23,500 lb per axle. Kit weight runs from 199 lb to 304 lb depending on configuration.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes two 8 ft ramps, six lumber clips, and four stake pocket supports, which works out to three lumber clips and two stake pocket supports per load leveler. The 24 in and 26 in configurations add two load leveler spacers. Bunk lumber, chains, and load binders are not included. The ramps are aluminum with a rung walking surface and are made in the USA.\u003c\/p\u003e\n\u003cp\u003eThis system is not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 8 ft aluminum ramps that convert into two load leveler bunks\u003c\/li\u003e\n\u003cli\u003eFits 102 in wide step deck trailers, 97 to 98 in inside the stake pockets\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes six lumber clips and four stake pocket supports\u003c\/li\u003e\n\u003cli\u003eKit weight 199 lb to 304 lb, set up by one person\u003c\/li\u003e\n\u003cli\u003eRung walking surface, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025275527338,"sku":"HD-20-16-096-02-02-MLL-2","price":2779.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025275560106,"sku":"HD-23-18-096-02-02-MLL-2","price":3025.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025275592874,"sku":"HD-23-20-096-02-02-MLL-2","price":3282.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025275625642,"sku":"HD-23-24-096-02-02-MLL-2","price":3582.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025275658410,"sku":"HD-23-26-096-02-02-MLL-2","price":3838.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_L_x_16_W_2_Bunk_Load_Leveler_2_Ramp_System_for_16_H_Step_Deck_Trailers_-_20_000_lb._Capacity_20-16-096-02-02-MLL-2.jpg?v=1785793826"},{"product_id":"hd-ramps-16-l-x-16-w-step-deck-trailer-ramp-kit-10-000-lb-capacity","title":"HD Ramps Step Deck Trailer Ramp Kit | 16 ft x 16 in Aluminum | 4 Ramp Sections and 2 Support Stands | 10,000 lb per Axle","description":"\u003ch4\u003eHD Ramps Step Deck Trailer Ramp Kit | 16 ft x 16 in Aluminum | 4 Ramp Sections and 2 Support Stands | 10,000 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps step deck trailer ramp kit is a 10,000 lb per axle modular loading system for flatbed and step deck trailers: four 8 ft by 16 in aluminum ramp sections and two adjustable center support stands, shipped as one kit.\u003c\/p\u003e\n\u003cp\u003eThe four sections assemble into a 16 ft run, or split into separate 8 ft upper and lower ramps when the load height is shorter. That flexibility is the point of the kit. Long wheelbase vehicles and low-clearance equipment need the shallower angle a 16 ft run gives, while a quick pickup load only needs 8 ft.\u003c\/p\u003e\n\u003cp\u003eThe two adjustable support stands set the ramp angle and prevent high-centering at the top of the run, which is the failure mode that damages bumpers and undercarriages on long vehicles. The stands adjust from 18 in to 24 in.\u003c\/p\u003e\n\u003cp\u003eThe kit suits trailers up to 40 in high, including flatbeds, step decks, loading docks, and vans, and handles cars, pickups, and commercial trucks up to class 6. Ramp sections have a pin-on attaching end and a stub foot. Each section is 16 in wide and 4-1\/4 in tall, and the complete kit weighs 360 lb. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eOptional lockable ramp hangers and support stand hangers store the whole kit beneath the trailer; these are sold separately. Skid seat brackets are also sold separately and should be pinned before use. Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections and two adjustable support stands in one kit\u003c\/li\u003e\n\u003cli\u003eRun as a full 16 ft system or split into separate 8 ft ramps\u003c\/li\u003e\n\u003cli\u003eSupport stands adjust from 18 in to 24 in to prevent high-centering\u003c\/li\u003e\n\u003cli\u003e10,000 lb per axle, for trailers and docks up to 40 in high\u003c\/li\u003e\n\u003cli\u003eHandles cars, pickups, and commercial trucks up to class 6\u003c\/li\u003e\n\u003cli\u003e16 in wide sections at a 4-1\/4 in profile, 360 lb complete\u003c\/li\u003e\n\u003cli\u003eAluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311019690,"sku":"HD-10-16-192-02-02M-S","price":4598.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/16_L_x_16_W_Step_Deck_Trailer_Ramp_Kit_10-16-192-02-02M-S_in_use_by_a_truck.jpg?v=1785793963"},{"product_id":"hd-ramps-8-x-18-aluminum-ramps-with-double-pin-on-ends-23-500-lbs-capacity","title":"HD Ramps Double Pin-On Trailer Ramps | 8 ft Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Double Pin-On Trailer Ramps | 8 ft Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps double pin on trailer ramps are 8 ft aluminum ramps with pin-on ends at both the attaching end and the foot, built for loading tractors, loaders, trucks, and heavy equipment onto step deck trailers, flatbeds, and loading docks. Pinning at both ends removes the kickout risk that comes with a ramp resting loose against a deck edge.\u003c\/p\u003e\n\u003cp\u003eThe same ramps are the building block of the HD Ramps load leveler kits, so they can be loaded from the front, the back, or the top step, and they turn on their side into load leveler stakes when it is time to haul rather than load. A reinforced stubbed toe keeps the lower end from bending under concentrated loads, which is what lets a pair serve either as sections of a modular system or as standalone 8 ft rear ramps.\u003c\/p\u003e\n\u003cp\u003eThree widths are available. The 16 in ramp sits on a 6 in tube, weighs 74 lb per ramp, and is rated at 20,000 lb per axle. The 18 in ramp sits on a 5 in tube, weighs 92 lb, and is rated at 23,500 lb per axle. The 20 in ramp also uses a 5 in tube, weighs 94 lb, and is rated at 23,500 lb per axle. All three are 8 ft long with a rung walking surface.\u003c\/p\u003e\n\u003cp\u003eAt under 100 lb per ramp, one person can set up a pair without equipment. Sold in pairs; each purchase is two ramps. Aluminum construction, made in the USA. Protected under US Patents 8347439 and 7930788.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity, and pin the ramps into their skid seat brackets before use. Skid seat brackets, chains, and load binders are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePin-on ends at both the attaching end and the foot eliminate ramp kickout\u003c\/li\u003e\n\u003cli\u003eThree widths: 16 in at 20,000 lb per axle, 18 in and 20 in at 23,500 lb per axle\u003c\/li\u003e\n\u003cli\u003e8 ft long, 74 lb to 94 lb per ramp, set up by one person\u003c\/li\u003e\n\u003cli\u003eRung walking surface\u003c\/li\u003e\n\u003cli\u003eReinforced stubbed toe allows use as modular sections or standalone 8 ft rear ramps\u003c\/li\u003e\n\u003cli\u003eLoad from the front, back, or top step\u003c\/li\u003e\n\u003cli\u003eSold in pairs, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276510378,"sku":"HD-20-16-096-02-02-LL","price":2048.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276543146,"sku":"HD-23-18-096-02-02-LL","price":2160.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276575914,"sku":"HD-23-20-096-02-02-LL","price":2369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_x16_Aluminum_Ramps_Double_Pin-On_Ends_with_20_000_lbs_Capacity_20-16-096-02-02-LL_attached_to_the_trailer.jpg?v=1785793798"},{"product_id":"hd-ramps-5-x-100-875-x-26-aluminum-load-leveler-bridge-for-step-deck-trailers","title":"HD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7\/8 in Span | 16-26 in Heights | 20,000 lb per Bridge","description":"\u003ch4\u003eHD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7\/8 in Span | 16-26 in Heights | 20,000 lb per Bridge\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps load leveler bridge is a single-piece aluminum bunk that spans the width of a step deck trailer and carries flatbed freight across the upper step drop. Where the convertible ramp kits ask you to lay ramps on their side, this is a purpose-built bridge that goes up in minutes and stays dedicated to leveling.\u003c\/p\u003e\n\u003cp\u003eThe bridge spans 100-7\/8 in and is 5 in thick, with adjustable offset stake pocket posts on each end. Pulling a pin and rotating the post gives 1\/2 in of overall width adjustment, so the bridge seats in stake pocket spacings from 97-1\/4 in to 97-3\/4 in. That covers most drop deck trailers, including Doonan, Featherlite, and Transcraft.\u003c\/p\u003e\n\u003cp\u003eSix heights are available to match your trailer's step drop: 16, 18, 20, 22, 24, and 26 in. Weight ranges from 53 lb at 16 in to 69 lb at 26 in, so one person can lift and set a bridge without help. Each bridge is rated at 20,000 lb over a 48 in span.\u003c\/p\u003e\n\u003cp\u003eWelded brackets on the top of the bridge are sized for a 4x4 timber, giving the load a wood bearing surface. Wood, chains, and load binders are sold separately, and the bridge must be chained and binder-secured before hauling. Aluminum construction, made in the USA. Sold individually; order the quantity of bridges your load requires.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e100-7\/8 in aluminum bridge spans the full trailer width in one piece\u003c\/li\u003e\n\u003cli\u003e20,000 lb capacity per bridge over a 48 in span\u003c\/li\u003e\n\u003cli\u003eSix heights from 16 in to 26 in for different step drops\u003c\/li\u003e\n\u003cli\u003eAdjustable offset stake pocket posts give 1\/2 in of width adjustment\u003c\/li\u003e\n\u003cli\u003eFits stake pocket spacings from 97-1\/4 in to 97-3\/4 in\u003c\/li\u003e\n\u003cli\u003eWelded brackets accept a 4x4 timber bearing surface\u003c\/li\u003e\n\u003cli\u003e53 lb to 69 lb, one-person setup, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276805290,"sku":"HD-20-04-101-16-LL","price":897.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276838058,"sku":"HD-20-04-101-18-LL","price":918.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276870826,"sku":"HD-20-04-101-20-LL","price":971.0,"currency_code":"USD","in_stock":true},{"title":"22\"","offer_id":49025276903594,"sku":"HD-20-04-101-22-LL","price":1030.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276936362,"sku":"HD-20-04-101-24-LL","price":1083.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276969130,"sku":"HD-20-04-101-26-LL","price":1132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/5_x_100.875_x_16_Aluminum_Load_Leveler_Bridge_for_Step_Deck_Trailers_20-04-101-16-LL.jpg?v=1785794137"},{"product_id":"hd-ramps-8-x-16-aluminum-ramps-with-pin-on-ends-10-000-lb-capacity","title":"HD Ramps Step Deck Loading Ramps | 8 ft x 16 in Aluminum | 18-26 in Load Height | 10,000 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Step Deck Loading Ramps | 8 ft x 16 in Aluminum | 18-26 in Load Height | 10,000 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps step deck loading ramps are 8 ft by 16 in aluminum ramps rated at 10,000 lb per axle, sized for loading cars, pickups, and wheeled equipment onto an upper deck. Pin-on ends lock the ramp to the trailer so it cannot kick out under a climbing load.\u003c\/p\u003e\n\u003cp\u003eEach ramp is 4-1\/4 in tall and weighs 59 lb, low enough to slide into storage brackets under the truck or trailer and light enough for one person to set. The working load height range is 18 in to 26 in, which covers most step deck upper decks and many loading docks.\u003c\/p\u003e\n\u003cp\u003eWide plate-style serrated cross bars run the length of the walking surface for traction in rain, mud, and snow. Aluminum construction resists rust and keeps the weight down without giving up capacity.\u003c\/p\u003e\n\u003cp\u003eSold in pairs; each purchase is two ramps. Made in the USA.\u003c\/p\u003e\n\u003cp\u003ePin the ramps into their skid seat brackets before use, and never exceed the rated axle capacity. Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Skid seat brackets are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity, 8 ft long by 16 in wide\u003c\/li\u003e\n\u003cli\u003eLoad height range of 18 in to 26 in\u003c\/li\u003e\n\u003cli\u003ePin-on ends prevent ramp kickout during loading\u003c\/li\u003e\n\u003cli\u003e59 lb per ramp, one-person setup\u003c\/li\u003e\n\u003cli\u003e4-1\/4 in profile slides into under-trailer storage brackets\u003c\/li\u003e\n\u003cli\u003ePlate-style serrated cross bars for wet and muddy conditions\u003c\/li\u003e\n\u003cli\u003eSold in pairs, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004312920234,"sku":"HD-10-16-096-02-02","price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_x_16_Aluminum_Ramps_with_Pin-On_Ends_10_000_lb._Capacity_10-16-096-02-02.jpg?v=1785794152"},{"product_id":"hd-ramps-hook-end-heavy-equipment-ramps-12x16-with-12-000-lbs-capacity","title":"HD Ramps Aluminum Equipment Loading Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 12 ft L x 16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Equipment Loading Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 12 ft L x 16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum equipment loading ramps carry 12,000 lb per axle and are sized for skid steers, compact track loaders on rubber wheels, trenchers, and utility tractors going onto standard-height equipment trailers. The hook attaching end grabs the trailer's angle iron or rub rail directly, and the stub foot spreads ground contact for stability on soft or uneven surfaces. Serrated rung surfaces hold traction in poor weather.\u003c\/p\u003e\n\u003cp\u003eEach ramp runs 12 ft long, 16 in wide, and 6-1\/4 in high, and weighs 102 lb. The 12 ft length paired with a 36 in to 42 in rise range gives a shallow enough approach for low-slung attachments and long wheelbases. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eCheck the axle weight of the machine being loaded against the per-axle rating before use. Sold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e12,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eHook end attaches to trailer angle iron or rub rail\u003c\/li\u003e\n\u003cli\u003eStub foot for stability on soft or uneven ground\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface for wet-weather traction\u003c\/li\u003e\n\u003cli\u003e12 ft L x 16 in W x 6-1\/4 in H per ramp\u003c\/li\u003e\n\u003cli\u003e102 lb per ramp\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004314591402,"sku":"HD-12-16-144-05-S","price":2775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Hook-End_Heavy_Equipment_Ramps_12_x16_with_12_000_lbs_Capacity_12-16-144-05-S_attached_to_the_trailer.jpg?v=1785794238"},{"product_id":"hd-ramps-6-x-14-hook-end-equipment-ramps-12-000-lb-per-axle-capacity","title":"HD Ramps Aluminum Skid Steer Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 6 ft L x 14 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Skid Steer Ramps | 12,000 lb per Axle | Hook End, Stub Foot | 6 ft L x 14 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese skid steer ramps carry 12,000 lb per axle in a 6 ft length — short, heavy-rated ramps for low decks, drop-deck trailers, and dock-height loading where a 12 ft pair would be far too shallow to be useful. They are built for contractors, landscapers, farmers, and rental yards loading rubber-wheeled skid steers, compact track loaders, trenchers, and compact tractors day in and day out.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 6 ft long, 14 in wide, and 4 in high, and weighs 42 lb, so a single person can set the pair without help. The hook attaching end grabs the trailer's angle iron or rub rail with no hardware, and the stub foot spreads ground contact for stability. The rung loading surface provides traction. The pair covers rises from 12 in to 20 in. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e12,000 lb per axle capacity in a 6 ft length\u003c\/li\u003e\n\u003cli\u003eSized for low decks, drop-decks, and dock-height loading\u003c\/li\u003e\n\u003cli\u003eHook end attaches with no hardware\u003c\/li\u003e\n\u003cli\u003eStub foot for stability on soft ground\u003c\/li\u003e\n\u003cli\u003e6 ft L x 14 in W x 4 in H per ramp, 42 lb\u003c\/li\u003e\n\u003cli\u003eCovers 12 in to 20 in rises\u003c\/li\u003e\n\u003cli\u003eRung loading surface\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004314624170,"sku":"HD-12-14-072-05-S","price":1252.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/6_x_14_Hook-End_Equipment_Ramps_12-14-072-05-S.jpg?v=1785794244"},{"product_id":"hd-ramps-10-l-x-16-w-hook-end-heavy-equipment-ramps-10-000-lb-per-axle-capacity","title":"HD Ramps Aluminum Equipment Ramps | 10,000 lb per Axle | Hook End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Equipment Ramps | 10,000 lb per Axle | Hook End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum equipment ramps carry 10,000 lb per axle and are built for contractors, landscapers, farmers, and rental fleets loading rubber-wheeled machinery onto open trailers. The hook attaching end latches over the trailer's angle iron or rub rail so the ramp will not kick out under load, and the reinforced stub foot gives solid ground contact on gravel, dirt, and pavement. Extra-wide serrated rungs keep traction when the surface is wet.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 10 ft long, 16 in wide, and 4-1\/4 in high, and weighs 73 lb — light enough for one person to set and reposition. The pair covers trailer rises from 36 in to 42 in, which suits most tandem-axle equipment trailers and low decks. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSuited to skid steers, compact tractors, trenchers, and similar wheeled equipment. Sold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eHook end latches to trailer angle iron or rub rail\u003c\/li\u003e\n\u003cli\u003eReinforced stub foot for solid ground contact\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated rungs for wet-weather traction\u003c\/li\u003e\n\u003cli\u003e10 ft L x 16 in W x 4-1\/4 in H per ramp\u003c\/li\u003e\n\u003cli\u003e73 lb per ramp for one-person handling\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004314656938,"sku":"HD-10-16-120-05-S","price":2158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/10_L_x_16_W_Hook_End_Heavy_Equipment_Ramps_10-16-120-05-S_in_use_by_a_bulldozer.jpg?v=1785794249"},{"product_id":"hd-ramps-7-6-x-14-aluminum-ramps-pin-on-ends-10-000-lbs-per-axle","title":"HD Ramps Aluminum Equipment Trailer Ramps | 8,000-12,000 lb per Axle | Pin-On End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Equipment Trailer Ramps | 8,000-12,000 lb per Axle | Pin-On End | 7 ft 6 in - 14 ft L x 14-16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese aluminum equipment trailer ramps use pin-on ends that seat into skid seat brackets on the trailer, holding the ramps locked in place through the whole load. Three capacity and size combinations cover most rubber-wheeled equipment, from compact tractors and trenchers up to heavier loaders. Skid seat brackets are sold separately. Every version uses a serrated rung surface for traction in rain, snow, and mud.\u003c\/p\u003e\n\u003cp\u003eConfigurations, per ramp: 7 ft 6 in x 14 in rated 10,000 lb per axle, 47 lb, 4-1\/4 in high, covering 24 in to 36 in rises, with a stub foot for solid ground contact. 14 ft x 16 in rated 8,000 lb per axle, 96 lb, 4-1\/4 in high, covering 36 in to 42 in rises, with a knife foot. 14 ft x 16 in rated 12,000 lb per axle, 115 lb, 6-1\/4 in high, covering 36 in to 42 in rises, with a knife foot. Capacity is per axle; all other figures are per ramp.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCapacities from 8,000 lb to 12,000 lb per axle\u003c\/li\u003e\n\u003cli\u003ePin-on ends seat into skid seat brackets (sold separately)\u003c\/li\u003e\n\u003cli\u003eLengths of 7 ft 6 in and 14 ft\u003c\/li\u003e\n\u003cli\u003eRise coverage from 24 in to 42 in depending on configuration\u003c\/li\u003e\n\u003cli\u003eSerrated rung surface on every version\u003c\/li\u003e\n\u003cli\u003e47 lb to 115 lb per ramp\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"7' 6\" \/ 10,000 lb per axle","offer_id":49025277853866,"sku":"HD-10-14-090-02-S","price":1364.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 12,000 lb per axle","offer_id":49025277886634,"sku":"HD-12-16-168-02","price":2989.0,"currency_code":"USD","in_stock":true},{"title":"14' \/ 8,000 lb per axle","offer_id":49025277919402,"sku":"HD-08-16-168-02","price":2273.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/7_6_x_14_Aluminum_Ramps_10-14-090-02-S.jpg?v=1785794254"},{"product_id":"hd-ramps-aluminum-semi-truck-wheel-riser-service-ramps-5-33-l-x-16-w-with-20-000-lbs-capacity","title":"HD Ramps Wheel Riser Ramps | Aluminum | 64 in L x 16 in W | 13-1\/4 in Lift | 20,000 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Wheel Riser Ramps | Aluminum | 64 in L x 16 in W | 13-1\/4 in Lift | 20,000 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eHD Ramps wheel riser ramps lift a semi tractor, motorhome, or Class A commercial vehicle to a stable working height for preventive maintenance and roadside service. Each ramp is 64 in long and 16 in wide and provides a 13-1\/4 in lift at 20,000 lb per axle — 40,000 lb GVW across the pair, enough for Class 8 tractors and loaded fleet vehicles.\u003c\/p\u003e\n\u003cp\u003eWood cribbing and stacked blocks shift under a drive tire and give no consistent lift height. These ramps replace both with a single fixed-geometry platform. An extra-wide cross-rung loading surface spreads the contact patch across the full tire width, and integrated wheel stops at the platform end prevent roll-through.\u003c\/p\u003e\n\u003cp\u003eAt 48 lb per ramp, they can be set out and picked up by one technician, which keeps them practical for mobile service calls rather than bolted-down shop use only. Aluminum construction resists rust and corrosion outdoors and through winter road salt.\u003c\/p\u003e\n\u003cp\u003eSuited to fleet maintenance facilities, independent truck shops, owner-operators, small buses, and shuttle vehicles. Sold in pairs. Made in the USA.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20,000 lb per axle, 40,000 lb GVW per pair\u003c\/li\u003e\n\u003cli\u003e13-1\/4 in lift height\u003c\/li\u003e\n\u003cli\u003e64 in ramp length\u003c\/li\u003e\n\u003cli\u003eExtra-wide cross-rung loading surface\u003c\/li\u003e\n\u003cli\u003eIntegrated wheel stops on each ramp\u003c\/li\u003e\n\u003cli\u003e48 lb per ramp, aluminum\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004319178922,"sku":"HD-WR-20K","price":1578.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/Aluminum_Semi_Truck_Wheel_Riser_Service_Ramps_WR-20K.jpg?v=1785794578"},{"product_id":"hd-ramps-10-l-x-20-w-pin-on-end-heavy-equipment-ramps-20-000-lb-capacity","title":"HD Ramps Aluminum Pin-On Trailer Ramps | 20,000 lb per Axle | Pins on Both Ends, Stub Foot | 10 ft L x 20 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Aluminum Pin-On Trailer Ramps | 20,000 lb per Axle | Pins on Both Ends, Stub Foot | 10 ft L x 20 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese pin-on trailer ramps carry 20,000 lb per axle — four times the capacity of a standard car-hauling pair — and are built for the heaviest wheeled machinery a tandem-axle trailer will take. Unlike single-end designs, these ramps pin at both ends, giving a fixed connection at the trailer and a positive anchor at the ground rather than relying on friction alone.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 10 ft long, 20 in wide, and 6 in high, and weighs 240 lb. The 20 in width gives generous tire tracking on wide-stance equipment, and the deeper 6 in section is what carries the rating. Stub feet provide solid ground contact on gravel, dirt, and pavement, and extra-wide serrated rungs hold traction in poor weather. The pair covers trailer rises from 36 in to 42 in. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eVerify the axle weight of the machine being loaded against the per-axle rating before use. Sold in pairs — two ramps per purchase. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003ePins on both ends for a positive connection at trailer and ground\u003c\/li\u003e\n\u003cli\u003eStub feet for solid ground contact\u003c\/li\u003e\n\u003cli\u003e20 in wide deck for wide-stance equipment\u003c\/li\u003e\n\u003cli\u003e10 ft L x 20 in W x 6 in H, 240 lb per ramp\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated rungs for traction\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004319342762,"sku":"HD-20-20-120-02-02","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/10_L_x_20_W_Pin-On_End_Heavy_Equipment_Ramps_20-20-120-02-02.jpg?v=1785794599"},{"product_id":"hd-ramps-2-bunk-load-leveler-4-ramp-master-kit-for-20-h-step-deck-trailers-23-500-lb-capacity-aluminum-ramps","title":"HD Ramps 2 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 18-20 in Step Deck Heights | 23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 18-20 in Step Deck Heights | 23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 2 bunk load leveler master kit is the complete package for a 102 in wide step deck trailer: four 8 ft aluminum ramp sections that assemble into a 16 ft run, two adjustable support stands, two load leveler bunks, and all the hanger hardware needed to store the whole system under the trailer.\u003c\/p\u003e\n\u003cp\u003eThe 16 ft run and adjustable stands let you set a shallower approach angle, which matters for long wheelbase equipment and low-clearance machines that would otherwise high-center at the top of a shorter ramp. When the load is on, two of the ramps turn on their side and drop into stakes seated in the trailer's stake pockets, forming two load leveler bunks that carry freight across the upper step.\u003c\/p\u003e\n\u003cp\u003eWhat separates the master kit from the 4 ramp system is storage hardware. The master kit adds four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets, so the ramps and stands hang beneath the trailer instead of taking up deck space.\u003c\/p\u003e\n\u003cp\u003eTwo configurations are available, matched to an 18 in or 20 in upper step drop, using 18 in or 20 in wide ramps on a 5 in tube. Both are rated at 23,500 lb per axle. Total kit weight is 705 lb at 18 in and 700 lb at 20 in.\u003c\/p\u003e\n\u003cp\u003eEvery kit includes four 8 ft ramps, two support stands, six lumber clips, four stake pocket supports, four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets. Bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one master kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft run for long wheelbase equipment\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eTwo of the ramps convert into load leveler bunks for hauling\u003c\/li\u003e\n\u003cli\u003eIncludes hanger and attaching brackets for under-trailer storage\u003c\/li\u003e\n\u003cli\u003eRated 23,500 lb per axle in both configurations\u003c\/li\u003e\n\u003cli\u003eConfigurations for 18 in and 20 in upper step drops\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 700 lb to 705 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"18\"","offer_id":49025276018858,"sku":"HD-23-18-192-02-02-MLL-2-KIT","price":8472.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276051626,"sku":"HD-23-20-192-02-02-MLL-2-KIT","price":8842.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-master-kit-ramp-and-load-leveler-combo-setup.jpg?v=1785794674"},{"product_id":"hd-ramps-4-bunk-load-leveler-4-ramp-master-kit-for-20-step-deck-trailers-23-500-lb-aluminum","title":"HD Ramps 4 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 4 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 4 bunk load leveler master kit is the largest step deck package in the line: four 8 ft aluminum ramp sections that assemble into a 16 ft run, two adjustable support stands, four load leveler bunks, and the full set of hanger hardware for under-trailer storage.\u003c\/p\u003e\n\u003cp\u003eFour bunks instead of two means every ramp in the kit converts, giving you four leveled support points across the upper step. That is the configuration to choose when you regularly haul long, heavy freight that needs support at more than two points, or when you want the flexibility to set bunk spacing to the load rather than the other way around.\u003c\/p\u003e\n\u003cp\u003eLoading works the same as the rest of the line. The pin-on ends seat in the trailer's stake pockets for a 16 ft ramp run, the stands adjust the approach angle, and the ramps then turn on their side into stakes to become the load leveler bunks.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus four load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 653 lb to 879 lb.\u003c\/p\u003e\n\u003cp\u003eEvery kit includes four 8 ft ramps, two support stands, 12 lumber clips, eight stake pocket supports, four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets. The 24 in and 26 in configurations add four load leveler spacers. Bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one master kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour load leveler bunks, double the support points of the 2 bunk kits\u003c\/li\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft run\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands plus full hanger hardware for under-trailer storage\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes 12 lumber clips and eight stake pocket supports\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 653 lb to 879 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276248234,"sku":"HD-20-16-192-02-02-MLL-4-KIT","price":8710.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276281002,"sku":"HD-23-18-192-02-02-MLL-4-KIT","price":9231.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276313770,"sku":"HD-23-20-192-02-02-MLL-4-KIT","price":9645.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276346538,"sku":"HD-23-24-192-02-02-MLL-4-KIT","price":10758.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276379306,"sku":"HD-23-26-192-02-02-MLL-4-KIT","price":11314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-ramp-leveler-setup.jpg?v=1785794680"},{"product_id":"hd-ramps-modular-step-deck-trailer-ramp-system-8-x-16-20-000-lb-aluminum","title":"HD Ramps Modular Step Deck Trailer Ramps | 16 ft Assembled Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps Modular Step Deck Trailer Ramps | 16 ft Assembled Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps step deck trailer ramps form a modular 16 ft loading system built for heavy equipment: four 8 ft aluminum ramp sections and two adjustable support stands, rated up to 23,500 lb per axle. This is the heavy-capacity counterpart to the 10,000 lb ramp kit, sized for tractors, loaders, and machinery rather than cars and pickups.\u003c\/p\u003e\n\u003cp\u003eThe system breaks down into sections one person can move, then assembles into a 16 ft run that reduces the approach angle enough for long, low equipment to clear. Two adjustable support stands, adjusting from 18 in to 24 in, hold the mid-span and keep the run from flexing under a moving load. Reinforced stubbed toes protect the lower ends, and extra-wide serrated cross bars hold traction in wet weather.\u003c\/p\u003e\n\u003cp\u003eThree widths are available. The 16 in system uses ramps on a 6 in tube, is rated at 20,000 lb per axle, and weighs 380 lb complete. The 18 in system uses a 5 in tube at 23,500 lb per axle and weighs 452 lb. The 20 in system also uses a 5 in tube at 23,500 lb per axle and weighs 460 lb.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramp sections and two support stands. Ramp sections attach with a pin-on end. Aluminum construction, made in the USA. Sold as a complete system; each purchase is one system.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Skid seat brackets, chains, and load binders are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft heavy equipment run\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in width, 23,500 lb per axle at 18 in and 20 in\u003c\/li\u003e\n\u003cli\u003eTwo support stands adjust from 18 in to 24 in to hold the mid-span\u003c\/li\u003e\n\u003cli\u003eBreaks into sections one person can handle\u003c\/li\u003e\n\u003cli\u003eReinforced stubbed toes resist bending at the lower ends\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated cross bars for traction in rain, mud, and snow\u003c\/li\u003e\n\u003cli\u003eComplete system weight 380 lb to 460 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276412074,"sku":"HD-20-16-192-02-02M","price":5554.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276444842,"sku":"HD-23-18-192-02-02M","price":5618.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276477610,"sku":"HD-23-20-192-02-02M","price":6146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/loading-military-truck-ramp-20-16-192-02-02m.jpg?v=1785794709"},{"product_id":"hd-ramps-pin-on-end-heavy-equipment-ramps-10-x-16-aluminum-10-000-lb-per-axle","title":"HD Ramps Pin-On Equipment Ramps | 10,000 lb per Axle | Pin-On End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs","description":"\u003ch4\u003eHD Ramps Pin-On Equipment Ramps | 10,000 lb per Axle | Pin-On End, Stub Foot | 10 ft L x 16 in W | Sold in Pairs\u003c\/h4\u003e\n\u003cp\u003eThese pin-on equipment ramps carry 10,000 lb per axle and seat into skid seat brackets on the trailer, which locks them against the deck so they cannot walk or kick out while a machine climbs. That fixed connection is the reason equipment haulers choose pin-on over hook-end for repeat loading of the same trailer. Skid seat brackets are sold separately.\u003c\/p\u003e\n\u003cp\u003eEach ramp measures 10 ft long, 16 in wide, and 4-1\/4 in high, and weighs 73 lb — light enough to set by hand despite the capacity. The reinforced stub foot spreads ground contact for stability on dirt and gravel, and extra-wide serrated rungs hold traction in rain, snow, and mud. The pair covers trailer rises from 36 in to 42 in, which suits standard tandem-axle equipment trailers. Suited to skid steers, compact tractors, trenchers, and similar rubber-wheeled machinery. Dimensions, weight, and rise range are per ramp; capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold in pairs — two ramps per purchase. \u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003ePin-on ends seat into skid seat brackets (sold separately)\u003c\/li\u003e\n\u003cli\u003eReinforced stub foot for stability on dirt and gravel\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated rungs for wet-weather traction\u003c\/li\u003e\n\u003cli\u003e10 ft L x 16 in W x 4-1\/4 in H per ramp\u003c\/li\u003e\n\u003cli\u003e73 lb per ramp\u003c\/li\u003e\n\u003cli\u003eCovers 36 in to 42 in rises\u003c\/li\u003e\n\u003cli\u003eSold in pairs, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004320424106,"sku":"HD-10-16-120-02-S","price":1944.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-bobcat-loading-10-16-120-02-s.jpg?v=1785794726"},{"product_id":"hd-ramps-aluminum-flatbed-trailer-ramps-kit","title":"HD Ramps Aluminum Flatbed Trailer Ramps Kit | 23,500 lb per Axle | 16 ft L x 18 in W | Pin-On End with Double Hangers","description":"\u003ch4\u003eHD Ramps Aluminum Flatbed Trailer Ramps Kit | 23,500 lb per Axle | 16 ft L x 18 in W | Pin-On End with Double Hangers\u003c\/h4\u003e\n\u003cp\u003eThese flatbed trailer ramps ship as a complete loading kit rated at 23,500 lb per axle. For fleets that load equipment onto flatbeds daily and need a fixed, repeatable setup rather than loose ramps. The kit includes four 8 ft x 18 in aluminum ramp sections, ramp support stands, 36 in aluminum skid-seat attaching brackets, and bolt-on double ramp hangers.\u003c\/p\u003e\n\u003cp\u003eThe skid-seat brackets create a reinforced interface between ramp and trailer so the pin-on ends stay locked under load, and the support stands hold a stable transition from ground to deck. The bolt-on double hangers mount under the trailer and store all four ramp sections secured and out of the way between jobs. Assembled, the system measures 16 ft long and 18 in wide, standing 5 in high, with a rung loading surface. Capacity is per axle.\u003c\/p\u003e\n\u003cp\u003eSold as a complete kit. Made in the USA from high-strength aluminum.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e23,500 lb per axle capacity\u003c\/li\u003e\n\u003cli\u003eFour 8 ft x 18 in aluminum ramp sections included\u003c\/li\u003e\n\u003cli\u003eRamp support stands included\u003c\/li\u003e\n\u003cli\u003e36 in aluminum skid-seat attaching brackets included\u003c\/li\u003e\n\u003cli\u003eBolt-on double ramp hangers for under-trailer storage\u003c\/li\u003e\n\u003cli\u003e16 ft L x 18 in W x 5 in H assembled\u003c\/li\u003e\n\u003cli\u003eRung loading surface\u003c\/li\u003e\n\u003cli\u003eMade in the USA from high-strength aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49009323606186,"sku":"HD-23-18-192-FLAT-BED-KIT","price":6911.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/23-18-192-FLAT-BED-Kit.webp?v=1785874852"}],"url":"https:\/\/selectramps.com\/collections\/trailer-ramps-over-10000-lb.oembed","provider":"Select Ramps","version":"1.0","type":"link"}