{"title":"Step Deck Ramps","description":null,"products":[{"product_id":"hd-ramps-16-l-x-20-w-4-bunk-load-leveler-4-ramp-system-for-20-h-step-deck-trailers-23-500-lb-capacity","title":"HD Ramps 4 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 4 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 4 bunk load leveler system gives a 102 in wide step deck trailer four load leveler bunks and a 16 ft ramp run, without the storage hardware of the master kit. If your ramps already have a hanger setup, or you store them on the deck, this is the configuration that skips what you do not need.\u003c\/p\u003e\n\u003cp\u003eFour 8 ft aluminum ramp sections assemble into a 16 ft run with two adjustable support stands controlling the approach angle. All four ramps convert to load leveler bunks: turn them on their side, drop them into stakes seated in the stake pockets, and you have four leveled support points across the upper step.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus four load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 508 lb to 700 lb, roughly 145 lb to 180 lb lighter than the equivalent master kit.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramps, two support stands, 12 lumber clips, and eight stake pocket supports. The 24 in and 26 in configurations add four load leveler spacers. Ramp hanger brackets, stand hanger brackets, attaching brackets, bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour load leveler bunks with a 16 ft assembled ramp run\u003c\/li\u003e\n\u003cli\u003eNo hanger hardware, for haulers who already store their ramps\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes 12 lumber clips and eight stake pocket supports\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 508 lb to 700 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276084394,"sku":"HD-20-16-192-02-02-MLL-4","price":6720.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276117162,"sku":"HD-23-18-192-02-02-MLL-4","price":7212.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276149930,"sku":"HD-23-20-192-02-02-MLL-4","price":7751.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276182698,"sku":"HD-23-24-192-02-02-MLL-4","price":8325.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276215466,"sku":"HD-23-26-192-02-02-MLL-4","price":8753.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/16_L_x_16_W_4_Bunk_Load_Leveler_4_Ramp_System_for_16_H_Step_Deck_Trailers_20-16-192-02-02-MLL-4_ramp_in_use_by_a_tractor.jpg?v=1785793926"},{"product_id":"hd-ramps-2-bunk-load-leveler-4-ramp-system-16x20-for-20-h-step-deck-trailers","title":"HD Ramps 2 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 4 Ramp System | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps step deck load leveler system pairs a 16 ft ramp run with two load leveler bunks, and is the most common configuration for haulers who need full-length loading and enough deck leveling for standard long freight. Four 8 ft aluminum ramp sections and two adjustable support stands handle loading; two of those ramps then convert to bunks for the haul.\u003c\/p\u003e\n\u003cp\u003eConversion takes minutes. Turn two ramps on their side, drop them into the adjustable stakes seated in the trailer's stake pockets, and the upper step is bridged with two leveled support points. The stakes fit all 102 in wide step deck trailers, 97 to 98 in measured inside the stake pockets, without modification.\u003c\/p\u003e\n\u003cp\u003eTwo bunks or four is the decision to make here. Two bunks cover most long freight and keep the kit lighter and cheaper. Four bunks, on the sibling 4 bunk system, add two more support points for loads that need them.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus two load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 452 lb to 580 lb.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramps, two support stands, six lumber clips, and four stake pocket supports. The 24 in and 26 in configurations add two load leveler spacers. Hanger hardware, bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e16 ft assembled ramp run with two load leveler bunks\u003c\/li\u003e\n\u003cli\u003eLightest of the four ramp kits at 452 lb to 580 lb\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eFits 102 in wide step deck trailers with no modification\u003c\/li\u003e\n\u003cli\u003eAluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025275691178,"sku":"HD-20-16-192-02-02-MLL-2","price":6175.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025275723946,"sku":"HD-23-18-192-02-02-MLL-2","price":6508.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025275756714,"sku":"HD-23-20-192-02-02-MLL-2","price":6978.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025275789482,"sku":"HD-23-24-192-02-02-MLL-2","price":7009.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025275822250,"sku":"HD-23-26-192-02-02-MLL-2","price":7480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/2_Bunk_Load_Leveler_4_Ramp_System_16_x16_for_16_H_Step_Deck_Trailers_23-18-192-02-02-MLL-2_bundled_products.jpg?v=1785793942"},{"product_id":"hd-ramps-2-bunk-load-leveler-2-ramp-system-8x20-for-26-h-step-deck-trailers","title":"HD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 2 bunk load leveler 2 ramp system is a dual-purpose kit for 102 in wide step deck trailers: a pair of 8 ft aluminum ramps for loading, and two load leveler bunks for hauling long freight across the step. Both jobs are handled by the same two ramps, so nothing extra rides along on the trailer.\u003c\/p\u003e\n\u003cp\u003eTo load, the pin-on ends slide into the trailer's stake pockets. To convert, the ramps are turned on their side and dropped into the adjustable stakes that seat in the same stake pockets, forming two level bunks that carry the load over the upper step drop. The stakes adjust to fit all 102 in wide step deck trailers, measuring 97 to 98 in from the inside of the stake pockets, with no trailer modification.\u003c\/p\u003e\n\u003cp\u003eChoose the configuration that matches your trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use ramps of matching width on a 5 in tube and are rated at 23,500 lb per axle. The 24 and 26 in configurations reach their height with 18 in and 20 in ramps plus two load leveler spacers, also rated at 23,500 lb per axle. Kit weight runs from 199 lb to 304 lb depending on configuration.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes two 8 ft ramps, six lumber clips, and four stake pocket supports, which works out to three lumber clips and two stake pocket supports per load leveler. The 24 in and 26 in configurations add two load leveler spacers. Bunk lumber, chains, and load binders are not included. The ramps are aluminum with a rung walking surface and are made in the USA.\u003c\/p\u003e\n\u003cp\u003eThis system is not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo 8 ft aluminum ramps that convert into two load leveler bunks\u003c\/li\u003e\n\u003cli\u003eFits 102 in wide step deck trailers, 97 to 98 in inside the stake pockets\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes six lumber clips and four stake pocket supports\u003c\/li\u003e\n\u003cli\u003eKit weight 199 lb to 304 lb, set up by one person\u003c\/li\u003e\n\u003cli\u003eRung walking surface, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025275527338,"sku":"HD-20-16-096-02-02-MLL-2","price":2779.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025275560106,"sku":"HD-23-18-096-02-02-MLL-2","price":3025.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025275592874,"sku":"HD-23-20-096-02-02-MLL-2","price":3282.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025275625642,"sku":"HD-23-24-096-02-02-MLL-2","price":3582.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025275658410,"sku":"HD-23-26-096-02-02-MLL-2","price":3838.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_L_x_16_W_2_Bunk_Load_Leveler_2_Ramp_System_for_16_H_Step_Deck_Trailers_-_20_000_lb._Capacity_20-16-096-02-02-MLL-2.jpg?v=1785793826"},{"product_id":"hd-ramps-16-l-x-16-w-step-deck-trailer-ramp-kit-10-000-lb-capacity","title":"HD Ramps Step Deck Trailer Ramp Kit | 16 ft x 16 in Aluminum | 4 Ramp Sections and 2 Support Stands | 10,000 lb per Axle","description":"\u003ch4\u003eHD Ramps Step Deck Trailer Ramp Kit | 16 ft x 16 in Aluminum | 4 Ramp Sections and 2 Support Stands | 10,000 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps step deck trailer ramp kit is a 10,000 lb per axle modular loading system for flatbed and step deck trailers: four 8 ft by 16 in aluminum ramp sections and two adjustable center support stands, shipped as one kit.\u003c\/p\u003e\n\u003cp\u003eThe four sections assemble into a 16 ft run, or split into separate 8 ft upper and lower ramps when the load height is shorter. That flexibility is the point of the kit. Long wheelbase vehicles and low-clearance equipment need the shallower angle a 16 ft run gives, while a quick pickup load only needs 8 ft.\u003c\/p\u003e\n\u003cp\u003eThe two adjustable support stands set the ramp angle and prevent high-centering at the top of the run, which is the failure mode that damages bumpers and undercarriages on long vehicles. The stands adjust from 18 in to 24 in.\u003c\/p\u003e\n\u003cp\u003eThe kit suits trailers up to 40 in high, including flatbeds, step decks, loading docks, and vans, and handles cars, pickups, and commercial trucks up to class 6. Ramp sections have a pin-on attaching end and a stub foot. Each section is 16 in wide and 4-1\/4 in tall, and the complete kit weighs 360 lb. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eOptional lockable ramp hangers and support stand hangers store the whole kit beneath the trailer; these are sold separately. Skid seat brackets are also sold separately and should be pinned before use. Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections and two adjustable support stands in one kit\u003c\/li\u003e\n\u003cli\u003eRun as a full 16 ft system or split into separate 8 ft ramps\u003c\/li\u003e\n\u003cli\u003eSupport stands adjust from 18 in to 24 in to prevent high-centering\u003c\/li\u003e\n\u003cli\u003e10,000 lb per axle, for trailers and docks up to 40 in high\u003c\/li\u003e\n\u003cli\u003eHandles cars, pickups, and commercial trucks up to class 6\u003c\/li\u003e\n\u003cli\u003e16 in wide sections at a 4-1\/4 in profile, 360 lb complete\u003c\/li\u003e\n\u003cli\u003eAluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004311019690,"sku":"HD-10-16-192-02-02M-S","price":4598.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/16_L_x_16_W_Step_Deck_Trailer_Ramp_Kit_10-16-192-02-02M-S_in_use_by_a_truck.jpg?v=1785793963"},{"product_id":"hd-ramps-8-x-18-aluminum-ramps-with-double-pin-on-ends-23-500-lbs-capacity","title":"HD Ramps Double Pin-On Trailer Ramps | 8 ft Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Double Pin-On Trailer Ramps | 8 ft Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps double pin on trailer ramps are 8 ft aluminum ramps with pin-on ends at both the attaching end and the foot, built for loading tractors, loaders, trucks, and heavy equipment onto step deck trailers, flatbeds, and loading docks. Pinning at both ends removes the kickout risk that comes with a ramp resting loose against a deck edge.\u003c\/p\u003e\n\u003cp\u003eThe same ramps are the building block of the HD Ramps load leveler kits, so they can be loaded from the front, the back, or the top step, and they turn on their side into load leveler stakes when it is time to haul rather than load. A reinforced stubbed toe keeps the lower end from bending under concentrated loads, which is what lets a pair serve either as sections of a modular system or as standalone 8 ft rear ramps.\u003c\/p\u003e\n\u003cp\u003eThree widths are available. The 16 in ramp sits on a 6 in tube, weighs 74 lb per ramp, and is rated at 20,000 lb per axle. The 18 in ramp sits on a 5 in tube, weighs 92 lb, and is rated at 23,500 lb per axle. The 20 in ramp also uses a 5 in tube, weighs 94 lb, and is rated at 23,500 lb per axle. All three are 8 ft long with a rung walking surface.\u003c\/p\u003e\n\u003cp\u003eAt under 100 lb per ramp, one person can set up a pair without equipment. Sold in pairs; each purchase is two ramps. Aluminum construction, made in the USA. Protected under US Patents 8347439 and 7930788.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity, and pin the ramps into their skid seat brackets before use. Skid seat brackets, chains, and load binders are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePin-on ends at both the attaching end and the foot eliminate ramp kickout\u003c\/li\u003e\n\u003cli\u003eThree widths: 16 in at 20,000 lb per axle, 18 in and 20 in at 23,500 lb per axle\u003c\/li\u003e\n\u003cli\u003e8 ft long, 74 lb to 94 lb per ramp, set up by one person\u003c\/li\u003e\n\u003cli\u003eRung walking surface\u003c\/li\u003e\n\u003cli\u003eReinforced stubbed toe allows use as modular sections or standalone 8 ft rear ramps\u003c\/li\u003e\n\u003cli\u003eLoad from the front, back, or top step\u003c\/li\u003e\n\u003cli\u003eSold in pairs, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276510378,"sku":"HD-20-16-096-02-02-LL","price":2048.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276543146,"sku":"HD-23-18-096-02-02-LL","price":2160.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276575914,"sku":"HD-23-20-096-02-02-LL","price":2369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_x16_Aluminum_Ramps_Double_Pin-On_Ends_with_20_000_lbs_Capacity_20-16-096-02-02-LL_attached_to_the_trailer.jpg?v=1785793798"},{"product_id":"hd-ramps-5-x-100-875-x-26-aluminum-load-leveler-bridge-for-step-deck-trailers","title":"HD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7\/8 in Span | 16-26 in Heights | 20,000 lb per Bridge","description":"\u003ch4\u003eHD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7\/8 in Span | 16-26 in Heights | 20,000 lb per Bridge\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps load leveler bridge is a single-piece aluminum bunk that spans the width of a step deck trailer and carries flatbed freight across the upper step drop. Where the convertible ramp kits ask you to lay ramps on their side, this is a purpose-built bridge that goes up in minutes and stays dedicated to leveling.\u003c\/p\u003e\n\u003cp\u003eThe bridge spans 100-7\/8 in and is 5 in thick, with adjustable offset stake pocket posts on each end. Pulling a pin and rotating the post gives 1\/2 in of overall width adjustment, so the bridge seats in stake pocket spacings from 97-1\/4 in to 97-3\/4 in. That covers most drop deck trailers, including Doonan, Featherlite, and Transcraft.\u003c\/p\u003e\n\u003cp\u003eSix heights are available to match your trailer's step drop: 16, 18, 20, 22, 24, and 26 in. Weight ranges from 53 lb at 16 in to 69 lb at 26 in, so one person can lift and set a bridge without help. Each bridge is rated at 20,000 lb over a 48 in span.\u003c\/p\u003e\n\u003cp\u003eWelded brackets on the top of the bridge are sized for a 4x4 timber, giving the load a wood bearing surface. Wood, chains, and load binders are sold separately, and the bridge must be chained and binder-secured before hauling. Aluminum construction, made in the USA. Sold individually; order the quantity of bridges your load requires.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e100-7\/8 in aluminum bridge spans the full trailer width in one piece\u003c\/li\u003e\n\u003cli\u003e20,000 lb capacity per bridge over a 48 in span\u003c\/li\u003e\n\u003cli\u003eSix heights from 16 in to 26 in for different step drops\u003c\/li\u003e\n\u003cli\u003eAdjustable offset stake pocket posts give 1\/2 in of width adjustment\u003c\/li\u003e\n\u003cli\u003eFits stake pocket spacings from 97-1\/4 in to 97-3\/4 in\u003c\/li\u003e\n\u003cli\u003eWelded brackets accept a 4x4 timber bearing surface\u003c\/li\u003e\n\u003cli\u003e53 lb to 69 lb, one-person setup, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276805290,"sku":"HD-20-04-101-16-LL","price":897.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276838058,"sku":"HD-20-04-101-18-LL","price":918.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276870826,"sku":"HD-20-04-101-20-LL","price":971.0,"currency_code":"USD","in_stock":true},{"title":"22\"","offer_id":49025276903594,"sku":"HD-20-04-101-22-LL","price":1030.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276936362,"sku":"HD-20-04-101-24-LL","price":1083.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276969130,"sku":"HD-20-04-101-26-LL","price":1132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/5_x_100.875_x_16_Aluminum_Load_Leveler_Bridge_for_Step_Deck_Trailers_20-04-101-16-LL.jpg?v=1785794137"},{"product_id":"hd-ramps-8-x-16-aluminum-ramps-with-pin-on-ends-10-000-lb-capacity","title":"HD Ramps Step Deck Loading Ramps | 8 ft x 16 in Aluminum | 18-26 in Load Height | 10,000 lb per Axle | Pair","description":"\u003ch4\u003eHD Ramps Step Deck Loading Ramps | 8 ft x 16 in Aluminum | 18-26 in Load Height | 10,000 lb per Axle | Pair\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps step deck loading ramps are 8 ft by 16 in aluminum ramps rated at 10,000 lb per axle, sized for loading cars, pickups, and wheeled equipment onto an upper deck. Pin-on ends lock the ramp to the trailer so it cannot kick out under a climbing load.\u003c\/p\u003e\n\u003cp\u003eEach ramp is 4-1\/4 in tall and weighs 59 lb, low enough to slide into storage brackets under the truck or trailer and light enough for one person to set. The working load height range is 18 in to 26 in, which covers most step deck upper decks and many loading docks.\u003c\/p\u003e\n\u003cp\u003eWide plate-style serrated cross bars run the length of the walking surface for traction in rain, mud, and snow. Aluminum construction resists rust and keeps the weight down without giving up capacity.\u003c\/p\u003e\n\u003cp\u003eSold in pairs; each purchase is two ramps. Made in the USA.\u003c\/p\u003e\n\u003cp\u003ePin the ramps into their skid seat brackets before use, and never exceed the rated axle capacity. Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Skid seat brackets are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10,000 lb per axle capacity, 8 ft long by 16 in wide\u003c\/li\u003e\n\u003cli\u003eLoad height range of 18 in to 26 in\u003c\/li\u003e\n\u003cli\u003ePin-on ends prevent ramp kickout during loading\u003c\/li\u003e\n\u003cli\u003e59 lb per ramp, one-person setup\u003c\/li\u003e\n\u003cli\u003e4-1\/4 in profile slides into under-trailer storage brackets\u003c\/li\u003e\n\u003cli\u003ePlate-style serrated cross bars for wet and muddy conditions\u003c\/li\u003e\n\u003cli\u003eSold in pairs, aluminum construction, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"Default Title","offer_id":49004312920234,"sku":"HD-10-16-096-02-02","price":1775.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/8_x_16_Aluminum_Ramps_with_Pin-On_Ends_10_000_lb._Capacity_10-16-096-02-02.jpg?v=1785794152"},{"product_id":"hd-ramps-2-bunk-load-leveler-4-ramp-master-kit-for-20-h-step-deck-trailers-23-500-lb-capacity-aluminum-ramps","title":"HD Ramps 2 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 18-20 in Step Deck Heights | 23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 2 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 18-20 in Step Deck Heights | 23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 2 bunk load leveler master kit is the complete package for a 102 in wide step deck trailer: four 8 ft aluminum ramp sections that assemble into a 16 ft run, two adjustable support stands, two load leveler bunks, and all the hanger hardware needed to store the whole system under the trailer.\u003c\/p\u003e\n\u003cp\u003eThe 16 ft run and adjustable stands let you set a shallower approach angle, which matters for long wheelbase equipment and low-clearance machines that would otherwise high-center at the top of a shorter ramp. When the load is on, two of the ramps turn on their side and drop into stakes seated in the trailer's stake pockets, forming two load leveler bunks that carry freight across the upper step.\u003c\/p\u003e\n\u003cp\u003eWhat separates the master kit from the 4 ramp system is storage hardware. The master kit adds four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets, so the ramps and stands hang beneath the trailer instead of taking up deck space.\u003c\/p\u003e\n\u003cp\u003eTwo configurations are available, matched to an 18 in or 20 in upper step drop, using 18 in or 20 in wide ramps on a 5 in tube. Both are rated at 23,500 lb per axle. Total kit weight is 705 lb at 18 in and 700 lb at 20 in.\u003c\/p\u003e\n\u003cp\u003eEvery kit includes four 8 ft ramps, two support stands, six lumber clips, four stake pocket supports, four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets. Bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one master kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft run for long wheelbase equipment\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands set the approach angle\u003c\/li\u003e\n\u003cli\u003eTwo of the ramps convert into load leveler bunks for hauling\u003c\/li\u003e\n\u003cli\u003eIncludes hanger and attaching brackets for under-trailer storage\u003c\/li\u003e\n\u003cli\u003eRated 23,500 lb per axle in both configurations\u003c\/li\u003e\n\u003cli\u003eConfigurations for 18 in and 20 in upper step drops\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 700 lb to 705 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"18\"","offer_id":49025276018858,"sku":"HD-23-18-192-02-02-MLL-2-KIT","price":8472.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276051626,"sku":"HD-23-20-192-02-02-MLL-2-KIT","price":8842.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-master-kit-ramp-and-load-leveler-combo-setup.jpg?v=1785794674"},{"product_id":"hd-ramps-4-bunk-load-leveler-4-ramp-master-kit-for-20-step-deck-trailers-23-500-lb-aluminum","title":"HD Ramps 4 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps 4 Bunk Load Leveler 4 Ramp Master Kit | 16 ft Assembled Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThe HD Ramps 4 bunk load leveler master kit is the largest step deck package in the line: four 8 ft aluminum ramp sections that assemble into a 16 ft run, two adjustable support stands, four load leveler bunks, and the full set of hanger hardware for under-trailer storage.\u003c\/p\u003e\n\u003cp\u003eFour bunks instead of two means every ramp in the kit converts, giving you four leveled support points across the upper step. That is the configuration to choose when you regularly haul long, heavy freight that needs support at more than two points, or when you want the flexibility to set bunk spacing to the load rather than the other way around.\u003c\/p\u003e\n\u003cp\u003eLoading works the same as the rest of the line. The pin-on ends seat in the trailer's stake pockets for a 16 ft ramp run, the stands adjust the approach angle, and the ramps then turn on their side into stakes to become the load leveler bunks.\u003c\/p\u003e\n\u003cp\u003eFive configurations match the trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use matching-width ramps on a 5 in tube at 23,500 lb per axle. The 24 and 26 in configurations use 18 in and 20 in ramps plus four load leveler spacers, also at 23,500 lb per axle. Total kit weight runs 653 lb to 879 lb.\u003c\/p\u003e\n\u003cp\u003eEvery kit includes four 8 ft ramps, two support stands, 12 lumber clips, eight stake pocket supports, four ramp hanger brackets, two stand hanger brackets, and four ramp attaching brackets. The 24 in and 26 in configurations add four load leveler spacers. Bunk lumber, chains, and load binders are not included. Aluminum construction, made in the USA.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one master kit.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour load leveler bunks, double the support points of the 2 bunk kits\u003c\/li\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft run\u003c\/li\u003e\n\u003cli\u003eTwo adjustable support stands plus full hanger hardware for under-trailer storage\u003c\/li\u003e\n\u003cli\u003eFive configurations for 16, 18, 20, 24, and 26 in upper step drops\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above\u003c\/li\u003e\n\u003cli\u003eIncludes 12 lumber clips and eight stake pocket supports\u003c\/li\u003e\n\u003cli\u003eTotal kit weight 653 lb to 879 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276248234,"sku":"HD-20-16-192-02-02-MLL-4-KIT","price":8710.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276281002,"sku":"HD-23-18-192-02-02-MLL-4-KIT","price":9231.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276313770,"sku":"HD-23-20-192-02-02-MLL-4-KIT","price":9645.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":49025276346538,"sku":"HD-23-24-192-02-02-MLL-4-KIT","price":10758.0,"currency_code":"USD","in_stock":true},{"title":"26\"","offer_id":49025276379306,"sku":"HD-23-26-192-02-02-MLL-4-KIT","price":11314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/hd-ramps-ramp-leveler-setup.jpg?v=1785794680"},{"product_id":"hd-ramps-modular-step-deck-trailer-ramp-system-8-x-16-20-000-lb-aluminum","title":"HD Ramps Modular Step Deck Trailer Ramps | 16 ft Assembled Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle","description":"\u003ch4\u003eHD Ramps Modular Step Deck Trailer Ramps | 16 ft Assembled Aluminum | 16-20 in Widths | 20,000-23,500 lb per Axle\u003c\/h4\u003e\n\u003cp\u003eThese HD Ramps step deck trailer ramps form a modular 16 ft loading system built for heavy equipment: four 8 ft aluminum ramp sections and two adjustable support stands, rated up to 23,500 lb per axle. This is the heavy-capacity counterpart to the 10,000 lb ramp kit, sized for tractors, loaders, and machinery rather than cars and pickups.\u003c\/p\u003e\n\u003cp\u003eThe system breaks down into sections one person can move, then assembles into a 16 ft run that reduces the approach angle enough for long, low equipment to clear. Two adjustable support stands, adjusting from 18 in to 24 in, hold the mid-span and keep the run from flexing under a moving load. Reinforced stubbed toes protect the lower ends, and extra-wide serrated cross bars hold traction in wet weather.\u003c\/p\u003e\n\u003cp\u003eThree widths are available. The 16 in system uses ramps on a 6 in tube, is rated at 20,000 lb per axle, and weighs 380 lb complete. The 18 in system uses a 5 in tube at 23,500 lb per axle and weighs 452 lb. The 20 in system also uses a 5 in tube at 23,500 lb per axle and weighs 460 lb.\u003c\/p\u003e\n\u003cp\u003eEvery configuration includes four 8 ft ramp sections and two support stands. Ramp sections attach with a pin-on end. Aluminum construction, made in the USA. Sold as a complete system; each purchase is one system.\u003c\/p\u003e\n\u003cp\u003eNot recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Skid seat brackets, chains, and load binders are sold separately.\u003c\/p\u003e\n\u003ch4\u003eProduct Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour 8 ft ramp sections assemble into a 16 ft heavy equipment run\u003c\/li\u003e\n\u003cli\u003eRated 20,000 lb per axle at 16 in width, 23,500 lb per axle at 18 in and 20 in\u003c\/li\u003e\n\u003cli\u003eTwo support stands adjust from 18 in to 24 in to hold the mid-span\u003c\/li\u003e\n\u003cli\u003eBreaks into sections one person can handle\u003c\/li\u003e\n\u003cli\u003eReinforced stubbed toes resist bending at the lower ends\u003c\/li\u003e\n\u003cli\u003eExtra-wide serrated cross bars for traction in rain, mud, and snow\u003c\/li\u003e\n\u003cli\u003eComplete system weight 380 lb to 460 lb, aluminum, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eWarranty\u003c\/h6\u003e\n\u003ch4\u003eFive-Year Warranty\u003c\/h4\u003e\n\u003cp\u003eThis product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.\u003c\/p\u003e","brand":"HD Ramps","offers":[{"title":"16\"","offer_id":49025276412074,"sku":"HD-20-16-192-02-02M","price":5554.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":49025276444842,"sku":"HD-23-18-192-02-02M","price":5618.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":49025276477610,"sku":"HD-23-20-192-02-02M","price":6146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/7964\/3818\/files\/loading-military-truck-ramp-20-16-192-02-02m.jpg?v=1785794709"}],"url":"https:\/\/selectramps.com\/collections\/trailer-step-deck-ramps.oembed","provider":"Select Ramps","version":"1.0","type":"link"}