Cargo Equipment Corp L-Track Triple Stud Fitting | Plain, Round Ring, Pear Ring or Threaded | 2,000 lb WLL

Cargo Equipment Corp L-Track Triple Stud Fitting

The Cargo Equipment Corp L-track triple stud fitting comes four ways: plain, with a round ring, with a pear ring, or threaded. The plain, round ring and pear ring versions each carry a 2,000 lb working load limit and a 6,000 lb break strength.

The plain fitting snaps into the track as an anchor point for tie-down straps, and the threaded version gives a point to bolt to instead. Its threading is 3/8-24 with a .65 in depth, and its working load limit is 2,000 lb in vertical pull and at 60 degrees, and 1,670 lb at 90 degrees.

For the two ring versions, Cargo Equipment Corp stresses that the L-track must be mounted properly to get the benefit of the fitting, because the weakest part of a securement system sets its strength.

Triple Stud Fitting Features

• Triple stud fitting for L-track
• Choice of plain, round ring, pear ring or threaded
• 2,000 lb working load limit on the plain, round ring and pear ring versions
• 6,000 lb break strength on the plain, round ring and pear ring versions
• Threaded version working load limit: 2,000 lb vertical and at 60 degrees, 1,670 lb at 90 degrees
• Threaded version: 3/8-24 threading, .65 in deep

Manufacture Guarantee

Cargo Equipment Corp Guarantee

Cargo Equipment Corp guarantees that its products are free of defects at the time of receipt. If a part arrives defective, Cargo Equipment Corp will repair or replace it, and its total liability is limited to that repair or replacement.

Inspection and Use

The user is responsible for inspecting the product before, during and after each use. Cargo Equipment Corp is not liable for special, indirect or consequential damages, or for the loss of any vehicle, cargo or profits.

Reporting a Defect

To report a defective part, contact Select Ramps and we will open the claim with Cargo Equipment Corp.