HD Ramps Grit-Coat Shipping Container Ramp | Aluminum | 36-48 in L x 36-45 in W | 6-8 in Max Rise | 8,000 lb per Axle

HD Ramps Grit-Coat Shipping Container Ramp | Aluminum | 36-48 in L x 36-45 in W | 6-8 in Max Rise | 8,000 lb per Axle

A container ramp for forklift access solves the one obstacle that slows every container load-in: the raised lip at the door opening. This HD Ramps grit-coat ramp bridges that lip at 8,000 lb per axle, so a counterbalance forklift or pallet jack drives straight in instead of transferring loads by hand at the threshold.

Three sizes cover different door widths and lip heights. The 36 in long by 36 in wide ramp clears a 6 in rise and weighs 42 lb. The 48 in by 36 in clears 8 in at 59 lb, and the 48 in by 45 in clears 8 in at 68 lb with the widest deck for larger forks and wider-track equipment. Deck profile is 2-1/8 in on the 36 in size and 1-1/4 in on both 48 in sizes.

The commercial-grade grit-coat surface is the difference on wet mornings and dusty warehouse floors. Where a smooth plate glazes over, grit-coat keeps a consistent friction surface under loaded drive wheels in rain, frost, and dust alike.

A knife-foot edge at the ground end tapers thin so pallets are not jostled at the transition, and the plate end seats on the container floor. Aluminum truss-design extrusion carries the axle load without the weight of a steel ramp, so the ramp can be repositioned between containers by hand.

Suited to warehouse operators, distribution centers, shipping yards, and contractors. Sold individually. Made in the USA.

Product Features

• 8,000 lb per axle across all three sizes
• Three sizes: 36 x 36 in, 48 x 36 in, and 48 x 45 in
• Clears container lips to 6 in or 8 in depending on size
• Commercial-grade grit-coat traction surface
• Knife-foot edge for a smooth ground transition
• Aluminum truss-design extrusion, 42 to 68 lb
• For forklifts and pallet jacks
• Made in the USA

Warranty

Five-Year Warranty

This product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.