Daytona BL-917 Compact Wheel Balancer with Self-Calibration
The Daytona BL-917 is the base model in the Daytona wheel balancer range, a compact unit for tire shops and professional garages that need accurate balancing in a small space. It works as the main balancer in a smaller shop or as a backup machine in a busy service center, and it handles wheels up to 143 lb, including motorcycle wheels.
Self-calibration and on-board sensor diagnostics keep readings accurate down to 1 gram, and a 10-second cycle keeps work moving. Standard (ST), dynamic (DYN) and three alloy modes (AL1, AL2 and AL3) cover the common wheel configurations.
The balancer has a 6.5 in. shaft and comes with four centering cones, a speed nut, a hammer and a caliper. On/off hood operation and a hood start mode give you control over each spin.
Key Features
- Self-calibration and onboard sensor diagnosis
- Automatic hood-start operation
- Multiple balancing modes for common wheel configurations
- Four centering cones included
Specifications
- Maximum wheel weight: 143 lbs
- Maximum wheel diameter: 35 in.
- Rim diameter range: 9.5 to 24 in.
- Rim width range: 1 to 20 in.
- Power: 120V / 1/6 HP / 5A / 1PH / 60Hz
- Shipping dimensions: 37 x 28 x 46 in.
- Shipping weight: 300 lbs
- Balancing accuracy: 1 g
- Balancing time: 10 sec.
- Space requirements: 44 W x 50 D x 68 H in.
Warranty
Daytona 5-2-1 Limited Warranty
Daytona equipment is covered by the Daytona 5-2-1 Limited Warranty against defects in material and workmanship. Coverage starts on the date of your purchase invoice and applies to the original owner.
- 5 years: structural components
- 2 years: power units, cylinders and seal kits
- 1 year: all other defective parts, minus the exclusions below
Daytona replaces parts that prove defective on inspection and pays the freight to ship covered replacement parts to you anywhere in Canada and the continental US.
How to Make a Claim
Contact Select Ramps with a copy of your purchase invoice and the serial number of your equipment. We submit the claim to the Daytona warranty department, which may ask for photos or video of the problem. Stop using the equipment while the claim is under review, because continued use during a warranty investigation voids coverage.
What Is Not Covered
- Wear parts, including cables, hoses, slider blocks, chains and rubber pads
- Parts and labor for normal maintenance such as cable adjustment and lubrication, plus on-site labor and service call fees
- Damage from improper installation, storage, operation or lifting, overloading, abuse, or poor maintenance, including missed annual safety inspections
- Equipment installed or used outdoors, modified from its original design, or improperly repaired
- Damage from flood, fire, corrosion or other acts of God, and cosmetic defects such as paint scratches that do not affect function
All Daytona equipment is designed for indoor installation and use only. Follow the installation, operation and maintenance instructions in the equipment manual to keep your coverage in effect. The warranty is not transferable, and Daytona makes the final decision on all warranty claims.