Daytona BL-950 Wheel Balancer with Hood and 7-Second Cycle
The Daytona BL-950 is the mid-size model in the Daytona wheel balancer range, with a quick 7-second balancing cycle that is 3 seconds faster than the BL-917. Built-in self-calibration and on-board sensor diagnosis and testing keep results accurate and consistent for high-volume shops.
The BL-950 includes a hood, and hood-start operation begins each spin when the hood comes down. Balancing modes include ST, DYN, AL1, AL2 and AL3, plus a dedicated motorcycle wheel function, and practical touches such as an on/off beep, weight storage and accessory pegs keep the work area organized.
An 8 in. shaft with a 40 mm diameter handles wheels up to 150 lb on rims up to 24 in. Five centering cones, a speed nut, a hammer and a caliper are included, so the machine is ready to work as soon as it is set up.
Key Features
- Self-calibration and onboard sensor diagnosis
- Automatic hood-start operation
- Multiple balancing modes including standard, dynamic, alloy, and motorcycle modes
- Wheel-mounting cones and accessory storage integrated into the machine
Specifications
- Maximum wheel weight: 150 lbs
- Maximum wheel diameter: 39 in.
- Rim diameter range: 9.5 to 24 in.
- Rim width range: 1 to 20 in.
- Power: 120V / 1/6 HP / 5A / 1PH / 60Hz
- Shipping dimensions: 44 x 28 x 46 in.
- Shipping weight: 350 lbs
- Balancing accuracy: 1 g
- Balancing time: 7 sec.
- Space requirements: 49 W x 54 D x 72 H in.
Warranty
Daytona 5-2-1 Limited Warranty
Daytona equipment is covered by the Daytona 5-2-1 Limited Warranty against defects in material and workmanship. Coverage starts on the date of your purchase invoice and applies to the original owner.
- 5 years: structural components
- 2 years: power units, cylinders and seal kits
- 1 year: all other defective parts, minus the exclusions below
Daytona replaces parts that prove defective on inspection and pays the freight to ship covered replacement parts to you anywhere in Canada and the continental US.
How to Make a Claim
Contact Select Ramps with a copy of your purchase invoice and the serial number of your equipment. We submit the claim to the Daytona warranty department, which may ask for photos or video of the problem. Stop using the equipment while the claim is under review, because continued use during a warranty investigation voids coverage.
What Is Not Covered
- Wear parts, including cables, hoses, slider blocks, chains and rubber pads
- Parts and labor for normal maintenance such as cable adjustment and lubrication, plus on-site labor and service call fees
- Damage from improper installation, storage, operation or lifting, overloading, abuse, or poor maintenance, including missed annual safety inspections
- Equipment installed or used outdoors, modified from its original design, or improperly repaired
- Damage from flood, fire, corrosion or other acts of God, and cosmetic defects such as paint scratches that do not affect function
All Daytona equipment is designed for indoor installation and use only. Follow the installation, operation and maintenance instructions in the equipment manual to keep your coverage in effect. The warranty is not transferable, and Daytona makes the final decision on all warranty claims.