HD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle

HD Ramps 2 Bunk Load Leveler 2 Ramp System | 8 ft Aluminum Ramps | 16-26 in Step Deck Heights | 20,000-23,500 lb per Axle

The HD Ramps 2 bunk load leveler 2 ramp system is a dual-purpose kit for 102 in wide step deck trailers: a pair of 8 ft aluminum ramps for loading, and two load leveler bunks for hauling long freight across the step. Both jobs are handled by the same two ramps, so nothing extra rides along on the trailer.

To load, the pin-on ends slide into the trailer's stake pockets. To convert, the ramps are turned on their side and dropped into the adjustable stakes that seat in the same stake pockets, forming two level bunks that carry the load over the upper step drop. The stakes adjust to fit all 102 in wide step deck trailers, measuring 97 to 98 in from the inside of the stake pockets, with no trailer modification.

Choose the configuration that matches your trailer's upper step drop: 16, 18, 20, 24, or 26 in. The 16 in configuration uses 16 in wide ramps on a 6 in tube and is rated at 20,000 lb per axle. The 18 and 20 in configurations use ramps of matching width on a 5 in tube and are rated at 23,500 lb per axle. The 24 and 26 in configurations reach their height with 18 in and 20 in ramps plus two load leveler spacers, also rated at 23,500 lb per axle. Kit weight runs from 199 lb to 304 lb depending on configuration.

Every configuration includes two 8 ft ramps, six lumber clips, and four stake pocket supports, which works out to three lumber clips and two stake pocket supports per load leveler. The 24 in and 26 in configurations add two load leveler spacers. Bunk lumber, chains, and load binders are not included. The ramps are aluminum with a rung walking surface and are made in the USA.

This system is not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the rated axle capacity. Sold as a complete kit; each purchase is one system.

Product Features

• Two 8 ft aluminum ramps that convert into two load leveler bunks
• Fits 102 in wide step deck trailers, 97 to 98 in inside the stake pockets
• Five configurations for 16, 18, 20, 24, and 26 in upper step drops
• Rated 20,000 lb per axle at 16 in, 23,500 lb per axle at 18 in and above
• Includes six lumber clips and four stake pocket supports
• Kit weight 199 lb to 304 lb, set up by one person
• Rung walking surface, aluminum construction, made in the USA

Warranty

Five-Year Warranty

This product is backed by HD Ramps' Five-Year Warranty and is guaranteed free of defects at the time of purchase. The warranty applies only to the original purchaser and is non-transferable. It is void if the product is misused, neglected, altered, tampered with, or damaged. HD Ramps may substitute, discontinue, or modify any product or part without notice; if a part is discontinued or modified before a claim is made, HD Ramps will provide a substitute. HD Ramps is not liable for damages arising from use of the product, including property damage or loss of use.