HD Ramps Aluminum Load Leveler Bridge for Step Deck Trailers | 100-7/8 in Span | 16-26 in Heights | 20,000 lb per Bridge

Hauling a flatbed load on a step deck trailer means working around the drop between the decks. This aluminum load leveler bridge spans the trailer at 100-7/8 in wide and comes in heights from 16 in to 26 in, so you order the one that matches your drop.

The bridge does not hold itself down: it must be secured with chains and binders, which are not included. The 4x4 lumber for its brackets is not included either, and the stake pockets suit trailers that measure 97.25 in to 97.75 in across the inside of the pockets.

Key features

• Matched to the drop. Each version fits trailers with a drop equal to its height, including Doonan, Featherlite and Transcraft step deck trailers.
• Rotating offset post. Pull a pin and rotate the offset stake pocket post to gain half an inch of overall width adjustment for most drop deck trailers.
• Welded dunnage brackets. Brackets welded to the bridge are sized to receive and secure a 4x4 piece of wood, not included.
• 20,000 lb rating. Maximum capacity is 20,000 lb on every height.
• Quick to place. The bridge can be set up in minutes, and the lightweight aluminum makes it easy to handle.
• Weight by height. The listed weight runs from 53 lb for the 16 in bridge to 69 lb for the 26 in bridge.
• Aluminum bridge, USA-made. All six heights are aluminum and Made in the USA.

Who it is for

Truckers who haul flatbed loads on a step deck trailer with a drop of 16 in, 18 in, 20 in, 22 in, 24 in or 26 in, including Doonan, Featherlite and Transcraft step deck trailers, and who chain each leveler down with their own binders.

Dimensions

• 16 in drop: 16 in H, listed weight 53 lb
• 18 in drop: 18 in H, listed weight 55 lb
• 20 in drop: 20 in H, listed weight 60 lb
• 22 in drop: 22 in H, listed weight 64 lb
• 24 in drop: 24 in H, listed weight 66 lb
• 26 in drop: 26 in H, listed weight 69 lb
• Every height: 100-7/8 in W x 5 in L

Measure the drop of your step deck and order the bridge with that height, then confirm the inside measurement across the stake pockets falls between 97.25 in and 97.75 in.

Warranty

Five-Year Warranty

HD Ramps backs this product with a Five-Year Warranty and guarantees it to be free of defects at the time of purchase.

• Non-transferability: The warranty is non-transferable and applies only to the original purchaser.
• Warranty voidance: The warranty is void if the product is misused, neglected, altered, tampered with or damaged.
• Product modifications: HD Ramps reserves the right to substitute, discontinue, alter or modify any product or part at any time without prior notice. If a product is discontinued or modified before a warranty claim is made, HD Ramps will provide a substitute for the defective product or part.
• Limited liability: HD Ramps is not liable for any damages that arise from the use of its products, including but not limited to property damage, loss of value of the product or loss of use of the product.