Cargo Equipment Corp 1 in Tent Ratchet Strap
Cargo Equipment Corp builds this 1 in ratchet strap for tying down tents. It uses high tensile polyester webbing made for outdoor work, and the manufacturer cites polyester's strength, UV resistance and durability as the reasons it suits tent tie-downs.
There are three white versions, each with a 24 in fixed end. The 12 ft strap comes with sewn loops or flat snap hooks, and the 16 ft strap has bull nose snap hooks.
Ratings depend on the end fitting. The sewn loop strap has a 1,100 lb working load limit and a 3,300 lb break strength, while both snap hook straps are rated at a 1,000 lb working load limit and a 3,000 lb break strength.
The hardware is zinc plated, and Cargo Equipment Corp assembles the straps in Illinois from globally sourced product.
1 in Tent Strap Features
- 12 ft with sewn loops: working load limit of 1,100 lb, break strength of 3,300 lb
- 12 ft with flat snap hooks: working load limit of 1,000 lb, break strength of 3,000 lb
- 16 ft with bull nose snap hooks: working load limit of 1,000 lb, break strength of 3,000 lb
- 24 in fixed end
- White high tensile polyester webbing, 1 in wide
- Zinc plated hardware
- Assembled in Illinois from globally sourced product
Manufacture Guarantee
Cargo Equipment Corp Guarantee
Cargo Equipment Corp guarantees that its products are free of defects at the time of receipt. If a part arrives defective, Cargo Equipment Corp will repair or replace it, and its total liability is limited to that repair or replacement.
Inspection and Use
The user is responsible for inspecting the product before, during and after each use. Cargo Equipment Corp is not liable for special, indirect or consequential damages, or for the loss of any vehicle, cargo or profits.
Reporting a Defect
To report a defective part, contact Select Ramps and we will open the claim with Cargo Equipment Corp.