Cargo Equipment Corp 2 in Auto Tire Ratchet Strap with L-Track Fittings and Rubber Cleats
L-track systems are what this Cargo Equipment Corp 2 in auto strap is made for. It uses three L-track fittings, one of them an idler that lets the webbing pass through freely as the strap is tightened.
Three floating rubber cleats, studded on both sides, lock into the tire tread so the strap does not move side to side. The ratchet is the 804 standard ratchet on a 6 in fixed end.
Blue polyester webbing runs 6 ft, and the strap has a 2,000 lb working load limit and a 6,000 lb break strength.
L-Track Auto Strap Features
- Three L-track fittings, including an L-track idler
- End fitting listed as L-track double stud with round ring
- Three floating rubber cleats studded on both sides
- 804 standard ratchet on a 6 in fixed end
- 2,000 lb working load limit
- 6,000 lb break strength
- Blue polyester webbing, 2 in wide, 6 ft long
Manufacture Guarantee
Cargo Equipment Corp Guarantee
Cargo Equipment Corp guarantees that its products are free of defects at the time of receipt. If a part arrives defective, Cargo Equipment Corp will repair or replace it, and its total liability is limited to that repair or replacement.
Inspection and Use
The user is responsible for inspecting the product before, during and after each use. Cargo Equipment Corp is not liable for special, indirect or consequential damages, or for the loss of any vehicle, cargo or profits.
Reporting a Defect
To report a defective part, contact Select Ramps and we will open the claim with Cargo Equipment Corp.