Cargo Equipment Corp 2 in Pallet Puller Connector Strap with Wire Hooks | 3,333 lb WLL | For 4 ft or 8 ft Pallets

Cargo Equipment Corp 2 in Pallet Puller Connector Strap with Wire Hooks

Cargo Equipment Corp sells this two-leg connector as a replacement strap for a pallet puller. Two lengths of 2 in webbing meet at a delta ring, and each leg finishes in a wire hook.

It comes in two configurations, matched to pallet width. The version for 4 ft wide pallets has two 2.5 ft legs, and the version for 8 ft wide pallets has two 5 ft legs.

Either one carries a 3,333 lb working load limit and a 10,000 lb break strength.

Pallet Puller Connector Features

• Two legs joined at a delta ring
• Wire hook on the end of each leg
• 3,333 lb working load limit
• 10,000 lb break strength
• Version for 4 ft wide pallets with two 2.5 ft legs
• Version for 8 ft wide pallets with two 5 ft legs
• 2 in webbing

Manufacture Guarantee

Cargo Equipment Corp Guarantee

Cargo Equipment Corp guarantees that its products are free of defects at the time of receipt. If a part arrives defective, Cargo Equipment Corp will repair or replace it, and its total liability is limited to that repair or replacement.

Inspection and Use

The user is responsible for inspecting the product before, during and after each use. Cargo Equipment Corp is not liable for special, indirect or consequential damages, or for the loss of any vehicle, cargo or profits.

Reporting a Defect

To report a defective part, contact Select Ramps and we will open the claim with Cargo Equipment Corp.