Cargo Equipment Corp E-Track Roller Idler Fitting for Wheel Straps | 2,000 lb WLL

Cargo Equipment Corp E-Track Roller Idler Fitting for Wheel Straps

The Cargo Equipment Corp E-track roller idler is commonly used with wheel straps when a vehicle is tied down on a trailer. The fitting clips into E-track, and the webbing of a ratchet strap feeds through its roller, so the strap moves freely while it is drawn down toward the track.

With the idler, a vehicle can be secured to the track by the tire or by the frame. A spring-loaded release lets it be moved from one track slot to another.

It is rated at a 2,000 lb working load limit with a 6,000 lb break strength. E-track and the tie-down strap are sold separately.

Roller Idler Fitting Features

• Roller idler fitting for E-track
• Strap feeds through the roller
• Spring-loaded release
• 2,000 lb working load limit
• 6,000 lb break strength
• E-track and strap sold separately

Manufacture Guarantee

Cargo Equipment Corp Guarantee

Cargo Equipment Corp guarantees that its products are free of defects at the time of receipt. If a part arrives defective, Cargo Equipment Corp will repair or replace it, and its total liability is limited to that repair or replacement.

Inspection and Use

The user is responsible for inspecting the product before, during and after each use. Cargo Equipment Corp is not liable for special, indirect or consequential damages, or for the loss of any vehicle, cargo or profits.

Reporting a Defect

To report a defective part, contact Select Ramps and we will open the claim with Cargo Equipment Corp.