Cargo Equipment Corp Sliding Winch for C-Track | Standard 6,670 lb WLL | Deep 5,500 lb WLL

Cargo Equipment Corp Sliding Winch for C-Track

Cargo Equipment Corp sliding winches for C-Track travel along the track in either direction until they sit where the strap is needed, then lock once the webbing is tensioned.

Two versions are listed. The standard heavy-duty winch has a 6,670 lb working load limit and a 20,010 lb break strength, and the deep winch has a 5,500 lb working load limit.

Both must be used with Kinedyne winch track, part numbers 3606 and 3607. The standard winch may also be welded in place as a fixed winch.

C-Track Sliding Winch Features

• Slides in both directions in the track
• Locks in place when the webbing is tensioned
• Standard winch: 6,670 lb working load limit, 20,010 lb break strength
• Deep winch: 5,500 lb working load limit
• Must be used with Kinedyne winch track
• Standard winch can also be welded in place

Manufacture Guarantee

Cargo Equipment Corp Guarantee

Cargo Equipment Corp guarantees that its products are free of defects at the time of receipt. If a part arrives defective, Cargo Equipment Corp will repair or replace it, and its total liability is limited to that repair or replacement.

Inspection and Use

The user is responsible for inspecting the product before, during and after each use. Cargo Equipment Corp is not liable for special, indirect or consequential damages, or for the loss of any vehicle, cargo or profits.

Reporting a Defect

To report a defective part, contact Select Ramps and we will open the claim with Cargo Equipment Corp.