Daytona LMS6 6,000 lb Low Profile Mid-Rise Scissor Lift
Getting under a low-clearance vehicle is hard with bulky lifting equipment, and weak support makes service work less convenient. The Daytona LMS6 is a 6,000 lb mid-rise scissor lift with an ultrathin frame that lowers to 5.5 in., so it slides under a wide range of vehicles and stores away easily when the job is done.
It is the compact, 120V option in the Daytona scissor lift range. Twin hydraulic cylinders give a smooth, strong lift to a maximum of 54 in. in about 45 seconds, and mechanical safety locks hold the lift in place while you work.
Height extensions and lifting pads come with the lift and add 2.5 to 8 in. of height to match different vehicle frames. The LMS6 fits professional service, inspection, repair and maintenance work wherever a compact mid-rise lift makes more sense than a full-rise unit.
Key Features
- Dual-cylinder hydraulic design
- Mechanical safety locks
- Low-profile platform design
- Height extensions included
Specifications
- Capacity: 6,000 lbs
- Minimum height: 5.5 in.
- Maximum lift height: 54 in.
- Platform size: 63 x 39 in.
- Base size: 84 x 40 in.
- Approximate rise time: 45 sec.
- Power: 120V / 1.5 HP / 15A / 1PH / 60Hz
- Height extensions / pads: Add 2.5 to 8 in.
Warranty
Daytona 5-2-1 Limited Warranty
Daytona equipment is covered by the Daytona 5-2-1 Limited Warranty against defects in material and workmanship. Coverage starts on the date of your purchase invoice and applies to the original owner.
- 5 years: structural components
- 2 years: power units, cylinders and seal kits
- 1 year: all other defective parts, minus the exclusions below
Daytona replaces parts that prove defective on inspection and pays the freight to ship covered replacement parts to you anywhere in Canada and the continental US.
How to Make a Claim
Contact Select Ramps with a copy of your purchase invoice and the serial number of your equipment. We submit the claim to the Daytona warranty department, which may ask for photos or video of the problem. Stop using the equipment while the claim is under review, because continued use during a warranty investigation voids coverage.
What Is Not Covered
- Wear parts, including cables, hoses, slider blocks, chains and rubber pads
- Parts and labor for normal maintenance such as cable adjustment and lubrication, plus on-site labor and service call fees
- Damage from improper installation, storage, operation or lifting, overloading, abuse, or poor maintenance, including missed annual safety inspections
- Equipment installed or used outdoors, modified from its original design, or improperly repaired
- Damage from flood, fire, corrosion or other acts of God, and cosmetic defects such as paint scratches that do not affect function
All Daytona equipment is designed for indoor installation and use only. Follow the installation, operation and maintenance instructions in the equipment manual to keep your coverage in effect. The warranty is not transferable, and Daytona makes the final decision on all warranty claims.